Post Your Requirement Menu

Welcome User

Other Products / Services

Leading Manufacturer, Supplier & Retailer of grip plate, FLATTENED EXPANDED METAL GRID GRIP, CUSTOMER SUPPLIED MATERIAL, Floor Scales and ALUMINUM PLANK.

grip plate

  • Thicknesses: 1/8″ to 2″+
  • Stock Sizes: 4’x8’
  • Available SlipNOT® Alloys: Steel, Stainless Steel, and Aluminum
  • SlipNOT® Finishes: Mill, Painted, or Galvanized Steel
  • Plates are Available in: Grade 1 (Fine), Grade 2 (Medium), and Grade 3 (Coarse – Steel surface only)

SlipNOT® slip resistant plates are designed for applications requiring complete surface coverage, transforming the most demanding environments into safe and productive work zones. SlipNOT® plates provide a permanently safe alternative to slippery diamond plate.

View Complete Details

FLATTENED EXPANDED METAL GRID GRIP

  • Stock Sizes: 4’x8’, 4’x10’, additional sizes available by special order Expanded metal can be custom fabricated to meet job specifications
  • Available SlipNOT® Surfaces: Steel, Stainless Steel, and Aluminum
  • SlipNOT® Finishes: Mill, Painted, or Galvanized Steel
  • Expanded Metal is Available in: Grade 1 (Fine), Grade 2 (Medium), and Grade 3 (Coarse – Steel surface only)
  • Installation Method: Welded or fastened to existing structures or to framing supports

SlipNOT® flattened expanded metal is an ideal solution for renovating existing slippery areas. Expanded metal easily retrofits over numerous materials, allowing air, light and liquids to flow through while providing maximum slip resistance.

View Complete Details

CUSTOMER SUPPLIED MATERIAL

Customer supplied material is recommended not to exceed 6’ wide x 12’ long x 8” high. Grating and plank may be accommodated in stock lengths of 20’, 24’, or 26’ if required. Material should be free from oil and grease before it is shipped to our facility. Supplying shop drawings or product lists prior to ordering will allow for more accurate cost estimates and faster turnarounds. Turnaround time is typically two weeks after receiving material (3-4 weeks for galvanized material), not including transit. Steel material must be supplied in mill finish, not hot-dipped galvanized or painted. Aluminum material should not be pre-anodized prior to submission for SlipNOT® application. For stainless steel, decorative finishes (polishing, brushed, etc.) should be performed to non-SlipNOT® treated areas after SlipNOT® application. Material may be marked, scarred, or otherwise impacted by processing activities which may harm decorative finishes.

View Complete Details

Floor Scales

  • Available SlipNOT® Surfaces: Steel, Stainless Steel, and Aluminum
  • SlipNOT® Finishes: Mill, Painted, or Galvanized Steel
  • Available in: Grade 1 (Fine), Grade 2 (Medium), or Grade 3 (Coarse – steel surface only)
  • Installation Method: Based on floor scale manufacturer

SlipNOT® provides a safe surface replacement for diamond plate on weighing systems such as Rice Lake Weighing System’s RoughDeck® SS and Auto Lift HE. SlipNOT® can coat customer supplied industrial scales or provide new weighing systems.

View Complete Details

ALUMINUM PLANK

  • Thicknesses: 3/4” to 2-1/2” (1/4” increments)
  • Widths: 6” – 36” per plank width table
  • Lengths: up to 26
  • Plank Styles: Solid, Rectangular Punched, or ADA Diagonal Punched
  • Open Area for ADA Patterns: ALP-8 (8%), ALP-15 (15%), ALP-22 (22%) SlipNOT® Surfaces: Aluminum, Stainless Steel on Aluminum, and

SlipNOT® aluminum plank provides a strong, lightweight flooring alternative to bar grating and fiberglass. Punched plank with a SlipNOT® coating allows light and liquids to pass through, similar to bar grating, but provides the additional surface coverage and slip resistance needed to prevent slip and fall accidents from occurring. The flush top of plank provides maximum foot contact with excellent strength-to-weight ratios.

View Complete Details

LADDER COVERS

  • Ladder Rung Thickness: 3/4″ and 1″, custom sizes available upon request
  • Ladder Rung Styles: Round or Square
  • Ladder Rung Stock Lengths: 12’ (11’-13’ randoms)
  • Available SlipNOT® Surfaces: Steel, Stainless Steel, and Aluminum
  • Stainless Steel Alloy Options: 304, 316, or specialty corrosion resistant alloys upon request

SlipNOT® ladder rungs provide essential safety for new ladder construction. The following OSHA standards apply to portable and fixed ladders: 1926.1053(a)(6)(i) The rungs and steps of fixed metal ladders manufactured after March 15, 1991, shall be corrugated, knurled, dimpled, coated with skid-resistant material, or otherwise treated to minimize slipping. 1926.1053(a)(6)(ii) The rungs and steps of portable metal ladders shall be corrugated, knurled, dimpled, coated with skid-resistant material, or otherwise treated to minimize slipping.

View Complete Details

GRIP GRATE

  • SlipNOT® Surfaces: Steel, Stainless Steel, and Aluminum
  • Grating is Available in: Grade 1 (Fine), Grade 2 (Medium), and Grade 3 (Coarse – Steel surface only)
  • SlipNOT® Finishes: Mill, Painted, or Galvanized Steel
  • Bearing Bar Height: 3/4” to 2-1/2” tall (in ¼” increments)
  • Bearing Bar Thickness: 3/16” (typical), and 1/4” is available upon request or supplier availability

SlipNOT® slip resistant grating provides maximum traction even in wet and oily environments. When choosing a bar grating option, the following components need to be specified: Bearing Bar Size Bearing Bar and Cross Bar Spacing Alloy of Material Quantity Length (span) and Width Dimensions Note: SlipNOT® surface is applied to smooth bar grating instead of serrated bar grating for maximum traction.

View Complete Details

stair nosings

  • Stair Nosing Thicknesses: 1/8”, 3/16”, 1/4”, or thicker
  • Stair Nosing Width: 1-1/4” minimum
  • Stair Nosing Depth: 1-1/4” minimum
  • Stair Nosing Lengths: up to 10’ (6’ or less recommended)
  • Available SlipNOT® Surfaces: Steel, Stainless Steel, and Aluminum

SlipNOT® stair nosings provide safety to the edge of steps that become worn easily due to heavy foot traffic. Stair nosings or angles easily retrofit over existing treads or can be built into new stairways.

View Complete Details

STAIR COVERS

  • Plate Stair Tread Thicknesses: 1/8”,3/16”, 1/4”
  • Plate Stair Tread Depth: 10 -12 inches (typical) or as specified
  • Plate Stair Tread Lengths: up to 10’
  • Plate Stair Tread Nosing: 1-1/4” – 2” (typical) or as specified
  • Plate Stair Tread Riser: up to 7” or as specified

SlipNOT® plate stair treads are for areas where full surface coverage is required to ensure a safe walking and working surface. Plate stair treads can be used in new construction or can be retrofitted over existing slippery stairs.

View Complete Details

expansion joint covers

  • Thicknesses: 3/16″, 1⁄4″, 5/16″, 3/8″, 1/2″, or as specified
  • Lengths: Typically up to 12′ – longer lengths available
  • Widths: 15″ (FDOT), 16″ (TXDOT), or per specification Expansion joint cover plates can be custom fabricated to meet job specifications
  • SlipNOT® Surfaces: Steel, Stainless Steel, and Aluminum
  • SlipNOT® Finishes: Mill, Painted, or Galvanized Steel

SlipNOT® expansion joint cover plates provide a durable high traction walking surface for pedestrian and vehicular traffic. Expansion joint covers are utilized for bridge sidewalks, parking decks, transportation platforms, walkways and other areas to meet public safety and regulatory compliance. SlipNOT® expansion joint covers are used and approved by agencies such as the Florida Department of Transportation (FDOT), Texas Department of Transportation (TxDOT), and other states. Please see skewed and non-skewed links below for typical details.Thicknesses:

View Complete Details

Ladder Rungs

SlipNOT® ladder rungs provide essential safety for new ladder construction. The following OSHA standards apply to portable and fixed ladders: 1926.1053(a)(6)(i) The rungs and steps of fixed metal ladders manufactured after March 15, 1991, shall be corrugated, knurled, dimpled, coated with skid-resistant material, or otherwise treated to minimize slipping. 1926.1053(a)(6)(ii) The rungs and steps of portable metal ladders shall be corrugated, knurled, dimpled, coated with skid-resistant material, or otherwise treated to minimize slipping.

View Complete Details

Stair Treads

SlipNOT® plate stair treads are for areas where full surface coverage is required to ensure a safe walking and working surface. Plate stair treads can be used in new construction or can be retrofitted over existing slippery stairs.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Detroit, MI 48207-3467 map, United States