Manufacturer / Exporter / Supplier Of Brass Sash Pulley, Storm Sash Hangers, Sash Chain, Chain Spirals, Stop Bead Adjusters, SRS Hardware AddOn Weight, Stackable Round Weights, Stackable Iron Weights, Stackable Lead Weights, SRS Number Tacks Read More
Sash chain is fastened to the sash by means of a “spiral”. The sash chain is threaded onto the spiral and the spiral is then slipped into a 34″ or 78″ diameter hole bored into the sash stile. This system is very simple and secure and allows for rapid and easy removal of the chain from the sash for painting and maintenance. Required spiral size determined by the hole present in sash. In the case of sash that are to be weatherstripped, it can be advantageous to use the smaller ¾” SPI 44 in order to avoid interfering with any kerfs, slots or weatherstripping.
Use: Stop Beads secure the interior stops in hung and fixed windows. These beads feature an elongated center slot which lets users adjust how tightly the stops press against the sash to eliminate sticking or rattling during seasonal changes. Note: Packages of 24 are generally sufficient for 3-4 windows depending on stop length.
Each 2-pound stackable round weight is 1-38” diameter by 7-18” long with a ½” diameter hole running through the center for threading the sash cord or chain. The conical shape at the top is made to fit the corresponding “socket’ of the weight above. By stacking multiple RW 2 weights you can quickly achieve any 2-pound increment. By using RW 2’s in conjunction with our AOW weights any weight can be achieved to balance typical residential sash. Case pricing assures our customers the very best price of $1.60lb and all sizes are kept in stock for immediate shipment.
These sash pulleys are the finest available in appearance, durability and function. Model PBB 250 pulleys are designed for large, heavy sash weights up to 2-14″ diameter such are found in commercial and public buildings. Residential and smaller buildings typically require the smaller 2-14” pulley, click here for more information.The pulley is carefully designed with a precisely machined faceplate. The radiused ends allow for rapid, simple and accurate mortising with a standard 1-18″ diameter router bit. Housing body = 2-78″ X 78″ X 1-78″ deep. The solid brass forged and machined housing shields the ball bearing and axle, preventing dirt and grit from affecting performance and assures many decades of easy operation. The wheel is CNC machined from solid brass. The pulley utilizes a chromed steel axle and sealed ball bearing and is available in five finishes: Lacquered Brass, Unlacquered Brass, Oil Rubbed Bronze, Polished Nickel and Satin Nickel. Use of bronze or stainless steel sash chain with these pulleys virtually eliminates all maintenance to the weight and pulley system. The pulley accommodates a full range of sash chain, however the use of the larger #35 and #45 chain is strongly recommended for use with heavier or sash with insulated glass.
Each SRS AOW (add on weights) ½ pound weight consists of a 1-38” diameter cast iron body and a CNC machined steel taper pin. The body has a ½” diameter hole through the center and a slot along its length allowing it to simply slip onto the sash cord or chain without having to unfasten the existing weight. Dropping the taper pin into the top of the slot firmly locks the weight onto the chain. Multiple AOW’s can be stacked in order to arrive at the perfect weight. Once you have removed the weight pocket cover and have access to the sash cord, installing the weights takes under 5 seconds each. We have kept the diameter small to be certain that the weights are suitable for residential sash and will fit easily through narrow residential weight pocket covers. AOW weights are offered in 10 piece “Residential packs” as well as 40 piece “Contractor packs”. SRS keeps plenty of cases in stock for immediate shipment.
Share your thoughts with other customers for smith restoration sash
Add Review
