Our Products #1630324

Each 2-pound stackable round weight is 1-38 diameter by 7-18 long with a diameter hole running through the center for threading the sash cord or chain. The conical shape at the top is made to fit the corresponding socket of the weight above. By stacking multiple RW 2 weights you can quickly achieve any 2-pound increment. By using RW 2s in conjunction with our AOW weights any weight can be achieved to balance typical residential sash.

Case pricing assures our customers the very best price of $1.60lb and all sizes are kept in stock for immediate shipment.

Each SRS AOW (add on weights) pound weight consists of a 1-38 diameter cast iron body and a CNC machined steel taper pin. The body has a diameter hole through the center and a slot along its length allowing it to simply slip onto the sash cord or chain without having to unfasten the existing weight. Dropping the taper pin into the top of the slot firmly locks the weight onto the chain. Multiple AOWs can be stacked in order to arrive at the perfect weight. Once you have removed the weight pocket cover and have access to the sash cord, installing the weights takes under 5 seconds each. We have kept the diameter small to be certain that the weights are suitable for residential sash and will fit easily through narrow residential weight pocket covers.

AOW weights are offered in 10 piece Residential packs as well as 40 piece Contractor packs.

SRS keeps plenty of cases in stock for immediate shipment.

SRS offers cast iron stackable weights in 1, 3 and 5-pound increments for use in sash with a minimum thickness of 1-34. The stackable feature allows you to easily optimize the weights to match sash weight with minimal waste.

The 1-34 square cross section allows for the greatest weight in a given weight pocket (a crucial consideration when dealing with heavy, wide or insulated units.)

When selecting weights remember; the weight cross section should never exceed the thickness of your sash. Following this rule will ensure that the weights will have adequate clearance and will not collide with one another. This condition is unacceptable and can cause the window to not function.

If you need to determine the length of any given stack of weights you only need to add the 1 pyramidal top once, as all of the other tops nest into the weight immediately above.

Lengths; 1 lb weight: = 1-12 L. (plus pyramidal top); 3 lb = 3-14 L. (plus pyramidal top); 5 lb = 7 (plus pyramidal top).

Case pricing assures our customers the very best price of $1.60lb and all sizes are kept in stock for immediate shipment.

Sash chain is fastened to the sash by means of a spiral. The sash chain is threaded onto the spiral and the spiral is then slipped into a 34 or 78 diameter hole bored into the sash stile.

This system is very simple and secure and allows for rapid and easy removal of the chain from the sash for painting and maintenance.

Required spiral size determined by the hole present in sash. In the case of sash that are to be weatherstripped, it can be advantageous to use the smaller SPI 44 in order to avoid interfering with any kerfs, slots or weatherstripping.

Our charming and practical number tacks are traditionally used to match removable wooden storm sash and screens to their respective window frames. In addition, we have seen them re-purposed to mark everything from wine bins to wooden shutters.

SRS numbered marking tacks, based upon the venerable Acro Numbering Tacks, have a pewter-like finish and are made of the original white brass alloy. They are durable, secure and the numerals remain legible even after decades and many layers of accumulated paint. The sharp, angular nail pierces even hardwood and the barb beneath the head anchors the tack down to stay.

The tacks are available in two number ranges, 1-25 and 26-50. One card of numbers is required for the window frame and additional cards with matching numbers are required for the storms andor screens.

These sash pulleys are the finest available in appearance, durability and function. Model PBB 250 pulleys are designed for large, heavy sash weights up to 2-14 diameter such are found in commercial and public buildings. Residential and smaller buildings typically require the smaller 2-14 pulley, click here for more information.The pulley is carefully designed with a precisely machined faceplate. The radiused ends allow for rapid, simple and accurate mortising with a standard 1-18 diameter router bit. Housing body = 2-78 X 78 X 1-78 deep.

The solid brass forged and machined housing shields the ball bearing and axle, preventing dirt and grit from affecting performance and assures many decades of easy operation. The wheel is CNC machined from solid brass. The pulley utilizes a chromed steel axle and sealed ball bearing and is available in five finishes: Lacquered Brass, Unlacquered Brass, Oil Rubbed Bronze, Polished Nickel and Satin Nickel.

Use of bronze or stainless steel sash chain with these pulleys virtually eliminates all maintenance to the weight and pulley system. The pulley accommodates a full range of sash chain, however the use of the larger #35 and #45 chain is strongly recommended for use with heavier or sash with insulated glass.

SRS offers stackable lead weights in 10 pound increments for use in sash with a minimum thickness of 1-34. The stackable feature allows you to easily optimize a mix of lead and iron sash weights to match sash weight with minimal waste.

When selecting weights, the weight cross section should never exceed the thickness of your sash. Following this rule will ensure that the weights will have adequate clearance and will not collide in the weight pocket. Oversize weights can impede sash movement and cause the window to malfunction. The 1-34 square cross section allows for the greatest weight in a given weight pocket, crucial when dealing with heavy, wide or insulated units.

To calculate the length of our weight stack, a 10lb weight 8.54 (total length, plus pyramidal top .74). Only add the .74 top once, as additional tops nest into the weight immediately above.

Case pricing assures our customers the very best price of $3.40lb. Cases are in stock for immediate shipment.

We offer the finest American made sash chain in a number of different trade sizes. All of our chains function smoothly and will provide decade upon decade of trouble free service. All chain is tested to 4 times the load rating.

Our storm sash hanger hardware has been designed for either flush or surface mounting of traditional 1-18 thick storm andor screen sash.

There are 4 ordering options for our storm sash hanger hardware:

Option A sets consist of: two head casing mounted brackets, two sash mounted hangers and 2 traditional retaining clips that utilize a carriage bolt and butterfly nut at the bottom of the sash to pull the stiles up tight to the exterior casing or blind stop. In this case, no provision is made to allow for the propping open of the storm in pleasant weather.

Option B sets consist of: two head casing mounted brackets and two sash mounted hangers this set omits the retaining clips and is intended to be used with our popular SA-01 storm stays (purchase separately). This excellent system provides flexibility to secure the storm shut in cold weather while also allowing the storm to be easily propped open for ventilation.

Option C half sets: These are used when a window is already fitted with a storm sash using our brackets and a screen is desired for the warmer months. This set omits the brackets (because they are already present on your head casings) and the bolt, clip and wing-nut assembly (because you swap out the assembly from your storms).

Option RC retaining clips: Used when storms exist, but a traditional manner for securing the stiles is desired.

All the above ordering options can be ordered individually or as a 4 Pack.

Storm hanging tip: our Acro Numbering Tacks are a timesaving addition to your storm and screen sash. No more frustrating guess-work to match storms to the window when putting up the sash!

Use: Stop Beads secure the interior stops in hung and fixed windows. These beads feature an elongated center slot which lets users adjust how tightly the stops press against the sash to eliminate sticking or rattling during seasonal changes.

Note: Packages of 24 are generally sufficient for 3-4 windows depending on stop length.