Our product range comtains a wide range of LoLander Truck Scales, HEAVY DUTY LOADING SCALES, Stainless Steel Floor Platforms, Heavy Duty Floor Platforms and digital indicators
he Cambridge LoLander Truck Scale is 12″ high which means less concrete and construction and shorter approach ramps. Structural tubular steel construction is the key to the Cambridge LoLander design. 2″ drain pipes allow water to flow from the deck to the ground below. This helps prevent water from clinging to the sides of the scale causing corrosion. OPTIONS: Stainless Steel Load Cells Guard rails Asphalt Undercoating Package Rodent Proof Cable 516″ & 38″ Thick Diamond Plate Above: Cambridge LoLander shown with flat top steel deck. The Cambridge LoLander Truck Scale utilizes the same rugged structural tubular steel construction made famous by Cambridge. The main structural tubular steel beams are cross strutted to maintain structural integrity and weight performance accuracy. The LoLander stand is built to protect the load cells from lightning damage. The load knobs are constructed of heavy duty 2″ steel. The load cells are constructed of high alloy steel and electroless nickle plated finish. The nylatron blocks slide onto 34″ rods and can be spaced with 14″ nylatron spacers. This eliminates the use of grout for height adjustment. The stands do not need to be attached to the foundation as the checking system prevents impact movement on the stands.
STANDARD FEATURES • 10, 000 through 40, 000 Lb capacities • Cross strutted structural tubular steel construction. • 12 inch thick smooth carbon steel deck plate. • Four internally mounted, IP 67 rated water resistant load cells. • Stainless steel self checking, captive ball leveling feet. • Stainless steel NEMA 4x junction trim box. • Top access leveling. • Durable urethane enamel paint. • 20 foot shielded indicator cable. • Eye bolt holes for easy setup and moving.
he MS11 Heavy-Duty floor scales with sturdy deck and channel construction for heavy usage. The MS11 (smooth deck) and MS1 2 (checkered safety tread deck) floor scales are constructed of 304 stainless steel, equipped with stainless steel sealed load cells and a NEMA 4X stainless steel junction box. Designed to meet or exceed NIST H-44 Class III 5000d scale guidelines.
The MP12 Heavy-Duty frameless floor scales offer a sturdy deck and channel construction and are certified to meet or exceed NIST H-44 Class III 5000d scale guidelines.The MP12 Heavy-Duty frameless floor scales offer a sturdy deck and channel construction and are certified to meet or exceed NIST H-44 Class III 5000d scale guidelines.Standard Platform Sizes:
Designed with simple to operate features, including ZERO, TARE, lb.kg conversion. Front panel configuration and calibration and a 6 digit, 1.0″ (25mm) high, red 7-segment LED display. Serial data output is standard RS232 data interface. NTEP Cert. # 91-092.
“Heavy Duty” Concentrated Loading 60K, 70K, and 80K Lb. Total Capacity 15K & 20K “Heavy Duty” Environmentally Sealed Load Cells Polycarbonate NEMA 4X Junction Box 4″ Structural Tubular Steel Construction Diamond Tread Deck Plate 200% Overload Protection Optional ramps are constructed with standard asphalt package so scales can be used on asphalt or concrete surfaces.
General Purpose Weighing Airport Containers Airport Trams Pick-Up Trucks Single Axle Light Duty Vehicles Recycling Centers Landscape Yard Standard Features Include: Modular Design 30, 000 lb & 40, 000 lb Capacities 4′, 5′ & 6′ Drop-in-Place Modules 8′ and 10′ Widths Available Environmentally Sealed Load Cells Stainless Steel NEMA IV Junction Box Structural Tubular Steel Construction Diamond Tread Deck Plates Scale Assembles in Sections on Site (No Welding) Standard Shipping Mode is by LTL Carrier Options: Ramps with Asphalt Package Stainless Steel Load Cells Model CSW-10 Indicator
MODEL 640-PS Standard Features: • (2) Poly bonded 4” wheels, w roller bearings and grease fittings. (front) • (2) Poly bonded 4” swivel wheels, w roller bearings and grease fittings. (rear) • 100 lb. to 1, 000 lb. capacity. • Low maintenance cost. • Structural tubular carbon steel construction. • Environmentally protected, NTEP Certified-5, 000 Division aluminum load cell. • Heavy gauge painted steel cover. • 4 point overload protection. • 1 part in 5, 000 accuracy. • Urethane enamel paint. • 40” high indicator column with mounting plate. • OSHA orange safety handle grips. • Shock absorbing platform bumpers.
MODEL SS670-P1 & SS670-P2 Standard Features: • (SS670-P1) One built-in front load 9” ramp with rear bumper rail. • (SS670-P2) Two built-in side load 9” ramps. • Structural tubular Type 304 stainless steel construction. • Smooth stainless steel plate with eye bolt holes. • 40″ indicator column with mounting plate. • 100% End loading capacity. • 150% Overload Protection. • (4) Internally mounted, Environmentally protected, NTEP certified-5000 Division, Class IIIIIIL, IP 67 water resistant rated, stainless steel load cells. • 10 foot indicator cable. • Compatible with most digital weight indicators. • Shielded load cell and indicator cables. • Column mounted stainless steel NEMA 4x junction box. • Low profile (1.5” above the floor). • Live side rails to weigh oversized loads. • (4) Top access scale adjustment handles. • (4) Plastic 4” wheels, with roller bearings and grease fittings.