Our Products #4964243

Hex nut with two or three, round or rectangular indentations, compressed onto the flat sides of the nut equidistant from each other.The compressions create slightly distorted center threads resulting in a controlled locking action when the threads of the mating partbecome engaged.

The Heico-Lock wedge locking system delivers high quality anti-vibration securityfor the most demanding of bolted joint applications.Even under extremes of vibration or dynamic loads, HEICO-LOCK wedge lock washers providemaximum reliability. When the bolt is tightened, the external radial teeth of the HEICO-LOCKwedge lock washers embed themselves in an interlocking fashion with the respective mating surface. If thesecuring system is subject to dynamic stress, movement is only possible between the internal washer surfaces.This results in an increase in the preload forcen Certified system for securing bolts, working at low and high preload levelsn Particularly suitable for dynamic loads including when using lubricantsn Can be re-used without any reduction in function or qualityn Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)n Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsn Available in steel or stainless steel with narrow or wide bearing surfaces other materials such as Inconeland SMO are available upon requestn Available from M3M42 and 1 custom sizes upon request

Pipe supports offered in this section are designed to support pipe from a base structure where vertical adjustment may be required. Pipe guides and slides are designed to allow longitudinal movement due to thermal expansion and contraction of pipe. Protection shields and saddles are designed to prevent damage to pipe insulation. Materials Carbon Steel is used in the manufacturing of pipe supports, guides, shields and saddles. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Plated Zinc (ASTM B 633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A 123), Red Primer, DURA-GREEN and other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, Copper plated, or in Stainless Steel. Approvals (as noted) Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSIMSS SP-69 & SP-58. All pipe supports in this section are sized to fit schedule 4080 pipe unless otherwise noted. Some steel items may be specially fabricated to fit other pipe diameters i.e. ductile iron, cast iron, etc. See pipe data charts on pages 294 thru 300 for proper size selection.

Triple the life of standard reciprocating saw blades, Master Cobalt technology has aunique combination of features resulting in the longest lasting recip blades available.They cut smooth, accurate, and offer great value.Features & BenefitsPremium bi-metal recipblade product Wide variety of sizes for everyprofessional cutting need Available in 3 different thicknessesto meet flexibility and stiffnessneeds for various applications Master Cobalt ReciprocatingSaw Blades have conventional shanks.

Combination Push-in Wall Clip12 and 34 EMT conduit12 Rigid, IMC, PVC SCH 4058 & 34 Copper TubeMCAC .700 - .925 ODIdeal for EMT support between wallstuds with SGBTSGB series bracketsQuickly attaches pipe, conduit, MCAC and tube to wall surfacesJust push in - theres no need toclose the clipReduces the need to stock multiple productsStandoff design reduces conduit bendingHelps to guide alignment with electrical boxknockoutsLow-profi le design minimizes snag potentialSecure with powder-actuated tools, self-tappingconcrete anchors or screw gunsLightweight, one-piece design

Aluminum Oxide 2AAluminum Oxide with Grinding Aid 3APremium aluminum oxide grain with grinding aidExcellent for reducing heat build-up on heat sensitive materials Excellent for cleaning, deburring, polishing, blending

Alloy (Inch) PlainAlloy (Inch) Zinc BakeAlloy (Inch) Mechanical ZincAlloy (Inch) Plain Nylon PatchAlloy (Inch) Plain 1936 SeriesStainless Steel 18-8 (Inch)Stainless Steel 316 (Inch)Stainless Steel 18-8 (Inch)Nylon PatchSocket Head Cap Screws SiliconBronzeSocket Head Cap Screws NickelCopperAlloy

#12 diameter utilizes the Phillips Square-Driv withinterlocking components system.- Keeps the driver securely mated to the fastenerduring installation.- Hands-free installation.#10 Diameter uses the coated Phillips drive system providingimproved driver bit to fastener stability and friction fit.Sharp convex drill point has precise cutting edges to improvedrill performance with less effort.Low profile pancake head style ensures proper installation ofmetal roof panels.

The Strong-Bolt 2 wedge anchor is the next-generation solution for cracked anduncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highestattainable anchor category for performance in cracked concrete under static and seismicloading. Available in stainless steel, it is code-listed by ICC-ES under the 2009 IBCrequirements for post-installed anchors in cracked and uncracked concrete.