Post Buy Requirement
SF
United States
Add Review

Our Products

Nuts

  • Material Nuts shall be made from a low-carbon steel which conforms to the following chemical composition requirements--Carbon: 0.47% max.; Phosphorus: 0.12% max.; Sulfur: 0.23% max.
  • Proof Load 90, 000 psi.
  • Plating See Appendix-A for plating information.
  • Hardness Rockwell C28 maximum
Hex nut with two or three, round or rectangular indentations, compressed onto the flat sides of the nut equidistant from each other.
The compressions create slightly distorted center threads resulting in a controlled locking action when the threads of the mating partbecome engaged.
View Complete Details

WEDGE WASHERS

The Heico-Lock wedge locking system delivers high quality anti-vibration security
for the most demanding of bolted joint applications.
Even under extremes of vibration or dynamic loads, HEICO-LOCK wedge lock washers provide
maximum reliability. When the bolt is tightened, the external radial teeth of the HEICO-LOCK
wedge lock washers embed themselves in an interlocking fashion with the respective mating surface. If the
securing system is subject to dynamic stress, movement is only possible between the internal washer surfaces.
This results in an increase in the preload forcen Certified system for securing bolts, working at low and high preload levels
n Particularly suitable for dynamic loads including when using lubricants
n Can be re-used without any reduction in function or quality
n Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
n Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts
n Available in steel or stainless steel with narrow or wide bearing surfaces other materials such as Inconel
and SMO are available upon request
n Available from M3M42 and 1 custom sizes upon request
View Complete Details

Pipe Fittings

Pipe supports offered in this section are designed to support pipe from a base structure where vertical adjustment may be required. Pipe guides and slides are designed to allow longitudinal movement due to thermal expansion and contraction of pipe. Protection shields and saddles are designed to prevent damage to pipe insulation. Materials Carbon Steel is used in the manufacturing of pipe supports, guides, shields and saddles. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Plated Zinc (ASTM B 633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A 123), Red Primer, DURA-GREEN and other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, Copper plated, or in Stainless Steel. Approvals (as noted) Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSIMSS SP-69 & SP-58. All pipe supports in this section are sized to fit schedule 4080 pipe unless otherwise noted. Some steel items may be specially fabricated to fit other pipe diameters i.e. ductile iron, cast iron, etc. See pipe data charts on pages 294 thru 300 for proper size selection.

View Complete Details

Cutting Tools

Triple the life of standard reciprocating saw blades, Master Cobalt technology has a
unique combination of features resulting in the longest lasting recip blades available.
They cut smooth, accurate, and offer great value.Features & Benefits
Premium bi-metal recip
blade product Wide variety of sizes for every
professional cutting need Available in 3 different thicknesses
to meet flexibility and stiffness
needs for various applications Master Cobalt Reciprocating
Saw Blades have conventional shanks.
View Complete Details

Cable Conduit

  • Conduit Size For 14-2 thru 12-3 MC/AC and 3/8 Flexible Conduit
Combination Push-in Wall Clip
12 and 34 EMT conduit
12 Rigid, IMC, PVC SCH 40
58 & 34 Copper Tube
MCAC .700 - .925 OD
Ideal for EMT support between wall
studs with SGBTSGB series brackets
Quickly attaches pipe, conduit, MC
AC and tube to wall surfaces
Just push in - theres no need to
close the clip
Reduces the need to stock multiple products
Standoff design reduces conduit bending
Helps to guide alignment with electrical box
knockouts
Low-profi le design minimizes snag potential
Secure with powder-actuated tools, self-tapping
concrete anchors or screw guns
Lightweight, one-piece design
View Complete Details

Flap Wheels

  • STAINLESS Stainless steel, high tensile steel, titanium
  • METAL Ferrous and/or non-ferrous metals
  • Packaging 10/box
Aluminum Oxide 2A
Aluminum Oxide with Grinding Aid 3A
Premium aluminum oxide grain with grinding aid
Excellent for reducing heat build-up on heat sensitive materials

Excellent for cleaning, deburring, polishing, blending
View Complete Details

Socket Screws

Alloy (Inch) Plain
Alloy (Inch) Zinc Bake
Alloy (Inch) Mechanical Zinc
Alloy (Inch) Plain Nylon Patch
Alloy (Inch) Plain 1936 Series
Stainless Steel 18-8 (Inch)
Stainless Steel 316 (Inch)
Stainless Steel 18-8 (Inch)
Nylon Patch
Socket Head Cap Screws Silicon
Bronze
Socket Head Cap Screws NickelCopper
Alloy
View Complete Details

Drilling Screws

  • Diameter .#10, #12
  • Head Style #10: #2 Phillips Pancake
#12 diameter utilizes the Phillips Square-Driv with
interlocking components system.
- Keeps the driver securely mated to the fastener
during installation.
- Hands-free installation.#10 Diameter uses the coated Phillips drive system providing
improved driver bit to fastener stability and friction fit.Sharp convex drill point has precise cutting edges to improve
drill performance with less effort.Low profile pancake head style ensures proper installation of
metal roof panels.
View Complete Details

Strong Bolt

  • Material Carbon-steel stud with special alloy clip; stainless-steel stud with stainlesssteel clip
The Strong-Bolt 2 wedge anchor is the next-generation solution for cracked and
uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria,
the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest
attainable anchor category for performance in cracked concrete under static and seismic
loading. Available in stainless steel, it is code-listed by ICC-ES under the 2009 IBC
requirements for post-installed anchors in cracked and uncracked concrete.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Southwest Fastener LLC)
  • Phoenix, AZ 85004 map, United States
  • Share us via