Post Buy Requirement

Our Products

  1. Flush Bottom Outlet Valve 5 Products available
  2. Chemical Reactors & Process Tanks 4 Products available
  3. Valves & Valve Fittings 61 Products available
  4. Measurement Gauges & Fittings 4 Products available
  5. Industrial Valves 89 Products available
  6. Pipeline Accessories 4 Products available
  7. Commercial Air Conditioner 3 Products available
  8. Separators & Strainers 12 Products available
  9. Pet And Farming Animals 12 Products available
  10. Others 114 Products available

Other Products / Services

Electro-Pneumatic

Electro-pneumatic transducers are used to convert current or voltage input signals to proportional output pressures. They are used for process control in valves, pneumatic relays and flow regulators. The PCD division of Marsh Bellofram designs and manufactures high-precision voltage-to-pressure (EP), current-to-pressure (IP), and pressure-to-current (PI) transducers for a variety of industrial and OEM applications.
View Complete Details

Cold Water Mixers

  • Model E20W
The 3-port mixing valve utilizes ceramic shear action disc technology to provide tight shut-off, high pressure differential capability, and long life integrity. Fitted with the electronic actuator and integrated temperature sensor, the system delivers high performance stand-alone closed-loop temperature control.
View Complete Details

Duplex Stainless Steel Trap

  • Model Number 995LD-DSS Series
Armstrong's duplex stainless steel free-floating guided lever drain trap use the same lever mechanisms, valves and seats of Armstrong inverted bucket steam traps.

The hemispherical valve, seat and leverage of the 995LD-DSS duplex stainless steel trap are identical in design, materials and workmanship to those for saturated steam service up to 20 bar with the exception of the addition of a guidepost to assure a positive, leaktight valve closing under all conditions.

Currently available in Europe, the Middle East, and Africa.
View Complete Details

Flanged

  • Model Number PRHLF
  • Series 36HLF
Lead Free Direct Acting, High Capacity, 12" to 3" NPT, 2-12" & 3" Flanged. (Lead Free: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with CA AB 1953 and VT S.152. ANSI 3rd party certified and listed.)
View Complete Details

Side-mounted Handwheels

  • Series 20-400
Rated: 125 psig @ 350F, 300 psig @ 100F
Side-mounted handwheels allow water gauge operation in hard-to-reach places; with all the 20 Series design features.
View Complete Details

Cast Bronze

  • Series 20-300
Rated: 200 psig @ 400F, 400 psig @ 100F Available with 12" (ASTM B-16 brass bar stock) or 34" (B-584 cast bronze) NPT male pipe connections. Four guard rods and EPDM gauge glass gaskets standard. Other glass gaskets available. Automatic ball checks help prevent the loss of fluids should the glass be broken.
View Complete Details

Extended Shank

  • Series 21
21-100 rated 125 psig @ 350F, 300 psig @ 100F., 21-200 rated: 200 psig @ 400F, 400 psig @ 100F. Available with 38" or 12" MNPT connections; EPDM gauge glass gaskets and 14" needle drain valve in lower arm are both standard.
View Complete Details

Float Control Open Tanks

  • Model Number CF1-C1
The Cla-Val Model CF1-C1 Float Control is a float-actuated, multi-port pilot control which provides non-modulating, two-position, on-off operation. It is used primarily to operate remotely located Cla-Val valves requiring three-way or four-way pilot valve operation. Designed for used in open tanks, this control operates on a minimum level change of approximately one inch. Maximum level change is nineteen inches. This level adjustment can be located up to 1112 feet from the control by adding float rod extensions.
View Complete Details

Chain Lever

  • Series 20-601/602
Rated 250 psig @ 400F, 500 psig @100F
Lever on standard 12-foot chain allows operator to open and close valves that would be beyond reach. Valve stems operate on quarter-turns.
View Complete Details

Reduced Pressure Zone Backflow

  • Size 1/2" (RPZ II), 3/4" (RPZ II), 3/4" 1", 1-1/4", 1-1/2" and 2"
The Cash Acme RPZ and RPZ II prevent back siphonage. The RPZ features a short lay length and a single top access cover for easy servicing, and two distinct checks that prevent misplacement in the valve. The body, test cocks, and shut-off valves are composed of bronze.
View Complete Details

Double Check Backflow Preventer

  • Sizes 3/4", 1", 1-1/2" and 2"
The Cash-Flo DCV features a top entry, single access cover and a bronze body. Four vertical test cocks and two quarter turn ball valves provide for easy and fast servicing of the valve.
View Complete Details

APOLLO RACK

  • 7. Bushings Polyoxymethylene (POM)
Designed and manufactured for the ultimate in durability and reliability, the new Apollo Pneumatic Rack & Pinion Actuators
provide outstanding service life.
Apollo Rack & Pinion actuators have replaceable insert drive adapters in all but the largest models, and many units have dual F
series bolt patterns. The numerous actuator drive and bolt pattern combinations allow direct mounting of several valve styles.
View Complete Details

Reduced Pressure Zone Backflow Preventer

  • Sizes 2-1/2", 3", 4", 6", 8", and 10"
The Cash-Flo RPZ features a short lay length and a single top access cover for easy servicing. The RPZ also features two distinct checks that prevent misplacement in the valve. The body, test cocks, and shut-off valves are composed of cast-iron.
View Complete Details

Cash-Flo Air Gap

  • Size 1/2"- 3/4", and 3/4"- 2"
The Cash-Flo Air Gap Adapter features cast iron or polycarbonate construction. Available for all backflow prevention devices.
View Complete Details

Pneumatic Actuators

Designed and manufactured for the ultimate in durability and reliability, the new Apollo Pneumatic Rack & Pinion Actuators
provide outstanding service life.
Apollo Rack & Pinion actuators have replaceable insert drive adapters in all but the largest models, and many units have dual F
series bolt patterns. The numerous actuator drive and bolt pattern combinations allow direct mounting of several valve styles.
View Complete Details

BFAC Pressure Reducing Backflow Preventer

  • Sizes 1/2" only
The Cash Acme BFAC combines the quality pressure reduction of the Cash Acme A-89 Pressure Reducing Boiler Feed Valve with the effective backflow prevention of the Cash Acme BFP Double-Check Backflow Preventer. The Cash Acme BFAC accurately reduces system pressure down to 14 psi while preventing the back-siphonage of contaminated water into the potable water supply. The BFAC features threaded (NPT) inlet and outlet connections.
View Complete Details

Hot Water Space Heating Boilers

  • Sizes 1/2"
Balanced piston for closer outlet pressure control regardless of variations in inlet pressure and a rapid fill feature with an improved larger seat for higher capacities and quicker fill. Has an iron body, brass internal parts on the regulator, special heat resistant composition diaphragm and O-rings, brass strainer screen, and stainless steel springs. Relief valve has bronze body, silicone seat disc and stainless steel spring.
View Complete Details

Backflow Preventer

  • Sizes 1/2" and 3/4" threaded or sweat.
Prevents backflow of contaminated water into potable water supply lines. Brass body with two spring loaded poppet-type valve modules and threaded female union inlet and outlet connections. Internal strainer screen, and stainless steel springs. Suitable for hot (up to 180F [82C]) or cold water under continuous pressure.
View Complete Details

Panel Mount

  • Series R9000
Fireye offers a number of Series 9000 Flame Amplifiers for use with the Series 9000 Flame Scanners. Each flame amplifier provides a flame relay, marginal alarm relay, adjustable flame threshold, adjustable flame failure response time (FFRT), built-in flame meter, 0-10 VDC output for a remote flame meter, and two separate adjustable gain settings selectable via external contacts.
View Complete Details

Line Blinds

Keckley quick acting fabricated line blinds are designed for applications where positive, visual indications of line closureopening are required.

Keckley quick acting line blinds are commonly found in oil and refinery, petrochemical, pulp and paper, and maritime industries. With the Keckley quick acting line blind, one operator can change a 6" line blind in five minutes without the need for special tools as compared to a typical 6" spectacle blind, which takes two maintenance men approximately 1-12 hours to change over.
View Complete Details

Mixing Valve Fitting Kits

Use with Heatguard 110, 160 and 115 base valves. Each kit includes three union nuts and face seals, plus three fittings for a specific type connection. Available in sweat, barbPEX, compression, threaded (NPT), and CPVC. All kits are available with check.
View Complete Details

TAFR Hot Water Shut-Off Devices

Thermal element senses high temperature water and shuts off flow to protect user. Device will only reset when water temperature drops to a safe level.
View Complete Details

Luminescent Scanners

  • Series C9000
Fireye offers a number of C9000 Series Flame Scanners for use with the R9000 Series Flame Amplifiers. Each scanner incorporates a flame detector (ultraviolet andor infrared detector) with sensitivity adjustment, and a mechanical light blocking chopper assembly (except model C9506). Flame scanners are available with either a military style connector or lead wires. Flame scanners with lead wires provide 12" NPSM tap for electrical fitting unless otherwise noted. The description of each part number lists the replacement components associated with each scanner.
View Complete Details

Fireye Surface Mounted Controls

  • WIRING BASE 60-2206-1
  • AMPLIFIER 60-2207-1
Fireye type 25SU5 model 5011, 5012, 5013 and type 25SU3 model 5166, 5168 controls are surface mounted controls used in conjunction with type 45UV5, 45RM, 45FS, 45UVFS flame scanners. These controls and scanners comprise a repetitive self-checking system that confirms flame presence and absence to provide reliable ignition and flame failure protection. When combined with appropriate auxiliary devices, these controls enable construction of integrated safety interlock systems for single and multiple industrial burner applications firing gas, oil, pulverized coal, or a combination of fuels continuously. The 5011, 5012, 5013, 5166, and 5168 Controls may also be installed in the safety control circuits of supervised manual, semi-automatic, and fully automatic burner management systems as the primary safety control. Wiring Base required: PN 60-2206-1 (5011, 5012, 5013), PN 6-2206-2 (5166, 5168).
View Complete Details

Unions

High pressure capacity makes this a robust piping solution for commercial, industrial, agricultural
View Complete Details

Thermostatic Retrofit Kit

  • Sizes 1/2" (24311-0000) and 3/4" (24312-0000)
Comes with 3 CTS tailpieces. The kit aids in the fast and easy installation of a thermostatic mixing valve in a domestic water distribution system. Use with SharkBite Push-Fit fittings to easily connect a Heatguard valve to 12" or 34" pipe. Heatguard 110-D purchased separately.
View Complete Details

SRV Valve

  • Model Number 3900
Features a separate, non-flowing pilot sub-assembly design
Suitable for use with both compressible and incompressible fluids
Optional pilot valve constructions offer either pop action or modulating action functionality
Inlet Sizes 1" through 10" Outlet Sizes: 2" through 10"
Orifice Sizes D - T
Set Pressure Range 15 to 6250 psig
Temperature Range -40 F to 505 F
Adjustable blowdown from: 2%-7%
Stainless steel pilot w carbon steel main valve & stainless steel trim
View Complete Details

Water Heater Temperature Control Kit

Cash Acme's Heatguard Tank Booster combines a Heatguard Thermostatic Valve, a Flexible Connector and a Water Heater Tee in one package. The thermostatic valve is factory set at 120F (49C), but may be easily adjusted. Use with SharkBite Flexible Water Heater Connectors for easy installation in systems using copper, CPVC or PEX tubing. No need for additional transition fittings. Use in residential and commercial applications to control the temperature of distributed hot water.
View Complete Details

New Butterfly Valve Flange Contractor Kit

Includes PVC Butterfly Valve, Two Lasco PVC Van-stone Flanges, and Bolt kit. All packed in one heavy-duty corrugated carton for delivery to jobsite.
View Complete Details

Eliminate Water Hammer

Patented thermoplastic gear driven operating nut rotates 360 to achieve a 90 turn of the ball. The result is slow closure and the elimination of water hammer, while maintaining the positive shut- off and reliable service of a ball valve.
View Complete Details

Hose Station

  • Model Number 2033
STEAMIX Model 2033 is a steamwater mixing valve of brassstainless steel construction.Mixing Valve STEAMIX model 2033 Hose Station The valve is supplied as standard with 34" inlet union connections, an outlet ball valve for flow control and an outlet dial thermometer. The unit is supplied fully assembled, pressure-tested and installed on a stainless steel hose rack.

STEAMIX Model 2033 includes 25 feet of "safety yellow" washdown hose, rubber cushioned spray nozzle with swivel adapter, and a stainless steel nozzle hook.
View Complete Details

Flow Control Mixing Unit

  • Model 2031
STEAMIX Model 2031 valve is supplied as standard with 34" inlet union connections, an outlet ball valve for flow control and an outlet dial thermometer. The unit is supplied fully assembled, pressure-tested.
View Complete Details

Temporary Bypass Kit

  • Size 3/4", 1" and 1-1/4"
EB-45 Temporary Bypass Kit
Includes a tube with debris screen fittings.
Available with Lead Free fittings.
View Complete Details

Double Check Valve Assemblies

  • Series 4A-100 / 4ALF-100
Top Entry Double Check Valve Assembly, Bronze Body, Modular Cartridge Checks with replaceable seats & Reversible Silicone Seat Discs, 12" to 2" with ball valve shutoffs with SS handles + trim.
View Complete Details

Heavy Duty Valve Setter

  • Series 4AN
Heavy Duty Valve Setter


Heavy Duty, FDA Fusion Bonded Epoxy Ductile Iron Valve Setter in 2-12" to 12".
View Complete Details

VAP Automatic Plumbing Vent

  • Sizes 1-1/2" Threaded MNPT
The VAP is designed to prevent backflow of sewer gases and trap siphonage at the fixture. vents by allowing air into the drain lines while the fixture is draining. An economical solution to preventing trap siphonage and backflow of dangerous sewer gases. The VAP can be securely hand tightened.
View Complete Details

Fireye EP Programmer Modules

The Fireye EP Programmer Modules are used with the Flame-Monitor Burner Management Control System (PN's E110 and E100). They provide start-up programming, safe start check, and flame monitoring supervision. They insure open damper high fire purge interlock (EP100 series only), proof of low fire position and fuel valve end switch safety checks. A running interlock circuit on the Flame-Monitor system constantly monitors the limit switches, air flow switches, and fuel pressure switches through the programmer. The EP programmer modules will de-energize all fuel valve circuits with 4 seconds (max.) following a flame failure (2 seconds for the EP165, EP166, EP265), or at the end of the pilot-trial-for-ignition period if no flame is detected. A modulator (firing rate motor) circuit is provided on the EP100 andEP200 series programmers. The EP300 series programmers do not provide a modulator circuit. The EP programmers provide a Check-Run switch to stop the control in its firing sequence at any time (except MTFI) to aid in set-up, start-up, and check out of the burner and its associated interlocks.
View Complete Details

Surge Anticipator Valve

  • Model 52-03 / 652-03
The Cla-Val Model 52-03652-03 Surge Anticipator Valve is indispensable for protecting pumps, pumping equipment and all applicable pipelines from dangerous pressure surges caused by rapid changes of flow velocity within a pipeline. When using this valve, pumping systems are started and stopped gradually preventing harmful surges from occurring.
View Complete Details

Two Way Flow Altitude Valve

  • Model 210-16 / 610-16
The Cla-Val Model 210-16610-16 Altitude Valve controls the high water level in reservoirs without the need for floats or other devices. It is a non-throttling valve that remains fully open until the shut off point is reached. This valve closes at a high water level, and opens for return flow when the pressure at the valve inlet is less than the reservoir pressure.
View Complete Details

One-Way Flow Altitude Valve

  • Model 210-01 / 610-01
The Cla-Val Model 210-01610-01 Altitude Valve controls the high water level in reservoirs without the need for floats or other devices. It is a non-throttling valve that remains fully open until the shut-off point is reached. This valve is designed for one-way flow only.
View Complete Details

AP Series Air Purgers

  • Size 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4"
AP Series Air Purgers
One piece cast iron construction. No service required. Economical and easy to install.
View Complete Details

Close Nipples

  • Sizes 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2"
Cash Acme close nipples are designed to connect various products that have NPT threads. Made of brass, with short lay lengths and available in the following sizes: 1.125 (12"), 1.375 (34"), 1.5 (1"), 1.625 (1-14"), 1.75 (1-12") and 2 (2").
View Complete Details

Check Detector Assembly

  • Series 4S-600
Double Check Detector Assembly: Domestic Epoxy Ductile Iron; Short Flanged Body Connections; SS Test Cock Handles & Trim; OS&Y, NRS Gate Options 10" Only.
View Complete Details

Check Valve Assembly:

  • Series 4S-100
Double Check Valve Assembly: Domestic Epoxy Ductile Iron Body; Flanged Body Connections, NRS, OS&Y Gate Options; SS Test Cock Handles & Trim. 10" Only.
View Complete Details

Altitude Valve

  • Model Number 210-02 / 610-02
The Cla-Val Model 210-02610-02 Altitude Valve controls the high water level in reservoirs without the need for floats or other devices. It is a non-throttling valve that remains fully open until the shut-off point is reached. This valve closes at the high water level, and for return flow, delays its opening until the pressure at the valve inlet lowers to a preset adjustable pressure of one to seven pounds.
View Complete Details

Surge Anticipator Valves

  • Model 52-01 / 652-01
The Cla-Val Model 52-01652-01 Surge Anticipator Valve is indispensable for protecting pumps, pumping equipment and all applicable pipelines from dangerous pressure surges caused by rapid changes of flow velocity within a pipeline. When using this valve, pumping systems are started and stopped gradually preventing harmful surges from occurring.
View Complete Details

Water Hammer Arrestors

  • Sizes (Domestic) 1/2" and 3/4"
  • Sizes (Commercial) 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2"
These Water Hammer Arrestors are certified for both domestic and commercial use, and contain only one moving part (a free-moving piston). The robust and simple construction is designed for vertical and horizontal installations.
View Complete Details

Feedwater Regulator

  • Model Number FF
The Apollo Model FF Fast FillFeedwater Pressure Regulator provides the heating boiler with make up water at reduced inlet pressure with a high capacity purge quick fill capability. They are manufactured in the US from proven ASTM grade materials for corrosion resistance and long life. Cartridge is replaceable in-line.
View Complete Details

Feedwater Regulator

  • Model Number FFB
Feedwater Regulator
The Apollo Model FFB Combination Backflow Preventer and Fast Fill Pressure Regulator is designed to protect residential and commercial potable water supply lines from back-siphonage or backpressure on Hot Water Heating Boilers. An intermediate atmospheric vent ensures positive protection from backflow conditions. The pressure regulator provides boiler make up water at the desired pressure and includes a purgequick fill feature.
View Complete Details

Pneumatically Operated Liquid Drainer

  • Model Number ADP-1 Series
The ADP-1 is a natural extension of Armstrong's BVSW (bucket vent scrub wire) and ball-float liquid drain traps. Since it uses a separate air source to open a discharge valve, the ADP-1 can open a large valve, regardless of the internal pressure in the liquid drainer, while still maintaining its low profile. The major wear points in this simple system are the piston and ball valve, and years of dependable service have proved the reliability of both.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Spence Control Engineering Dist. - M & M Control)
  • Grayslake, IL 60030 map, United States
  • Share us via