Spring Mills Manufacturing, Inc.

United States

At Spring Mills Manufacturing, Inc., we are the exclusive manufacturer of the Gettig Spot Taping and Labeling Systems. Our labeling systems utilize a semi-automatic labeling mechanism and are capable of up to 600 applications per hour. Software is provided with each machine, allowing customers to create labels with company names, parts numbers, date codes, or other pertinent information. Labels are printed on paper or polypropylene roll stock. The labels are then wrapped with an over-laminate material consisting of polyester with an acrylic or silicone adhesive. Our labels have been proven against a myriad of chemicals include brake fluid, antifreeze, motor oil, and salt water and in temperatures from -40°C to 150°C. Applications for the Gettig labeling system are not limited to wiring, and include an extensive list of components such as cables and hoses used in the automotive industry. Wires, cable, and hydraulic hoses between 0.050" and 1.5" can be labeled using this UL approved system. Simply put, no system can beat the efficiency, quality, and cost effectiveness of our labeling system. Systems can be customized for specific applications, including integration into existing in-line cutting systems. A variety of stock models are typically available for quick shipping, but specific systems can be quoted on a job by job basis. For more information about our semi-automatic wire labeling system, see the table below, or contact us directly.

The Gettig Spot Taping System, now produced by our team at Spring Mills Manufacturing, Inc., has a sterling reputation as a reliable, low-maintenance machine. Bundles between 0.125" and 1.5" can be taped at rates up to 600 applications per hour. Paper tape with a rubber adhesive backing can be used for temporary applications, such as transfer between assembly areas, to prevent cords and wires from becoming tangled. For permanent applications such as binding wires in vehicles, polyester tape with either acrylic or silicone adhesive is used. Clear, black, and white tape colors are available and specialized colors or printing is available on request. Our taping system has been proven to withstand brake fluid, antifreeze, and motor oil in lab testing and is ideal for long term bundling applications. The cost of each application is in the range of a few thousandths of a cent, making the Return on Investment (ROI) on the Gettig Spot Taper almost immediate when combining material and labor savings. When we purchased the right to manufacture the Gettig Spot Taper, we maintained Gettig's facilities and the vast majority of the company's long-term personnel. Customers should expect a seamless transition with no degradation to the quality of the product and a renewed dedication to customer service. For more information about the Gettig Spot Taping System, see the table below, or contact us directly.

At Spring Mills Manufacturing, Inc. we'll keep you competitive with our custom molded 7979 Push to Mount Wire Harness Clips. This innovative product is designed to add value and improve the quality to your application at the same time. These clips are specifically designed to work effortlessly with our automatic clip attachment systems. With a production rate of up to 400+ clips per hour, our clips and clip attachment systems will dramatically improve your productivity and profits. We offer Black, Gray and Natural colored clips to attach to diameters from 18" to 916". All clips have a retention force of 25-lbs. minimum in the appropriately sized holes and have a radius on the back to give better contact with your wires or cables. Our Push to Mount Wire Harness Clips out perform all standard flat clips, and are also easier to use and more robust. To learn more about this valuable product contact us directly.

These Polyester tapes are popular with the electrical and automotive industry for use in applications requiring good electrical andor temperature properties. The high strength characteristics of these tapes make them ideal for high temperature (150° C) applications. The #4010 Clear Polyester tape, which is UL recognized as being Flame Retardant, is most often used with our automatic labeling system as an over laminate. This provides not only a method to bind numerous objects together but also protects the printer generated label against wear, dirt, heat and other environmental conditions. This tape has survived even when soaked for seven days in fluids such as brake, transmission, and windshield washer fluid, as well as antifreeze, motor oil, salt water, or when subjected to temperature extremes of 150° C to -40°C. This tape also has enough initial stick to adhere to slippery products such as PTFE, polyethylene or other smooth non-porous surfaces. Our #7015 Black Polyester tape, which is UL recognized as being Flame Retardant, is commonly used to insulate an electrical splice or to hold a group of wires in a bundle. This tape has survived even when soaked for seven days in: brake, transmission, and windshield washer fluid, as well as antifreeze, motor oil, salt water, or when subjected to temperature extremes of 150° C to -40°C. This tape also has enough initial stick to adhere to slippery products such as PTFE, Polyethylene or other like surfaces. The #4002 Clear Polyester tape, which is UL recognized as being Flame Retardant, is most often used with our automatic labeling system as an over laminate. This provides not only a method to bind numerous objects together, but also protects the printer generated label against wear, dirt, heat and other environmental conditions. This tape has survived even when soaked for seven days in: transmission, and windshield washer fluid, as well as antifreeze, motor oil, salt water, or when subjected to temperature extremes of 150° C to -40°C and has even shown some resistance to Brake Fluid. This material has passed GM6121 AB Under the Hood Labeling Specification. The #4004 Black Polyester tape, which is UL recognized as being Flame Retardant, is most often used to insulate an electrical splice or to hold a group of wires in a bundle. This tape has survived even when soaked for seven days in: antifreeze, motor oil, salt water, transmission fluid, or windshield washer fluid, or when subjected to temperature extremes of 150° C to -40°C and has shown some resistance to brake fluid. The #4004 tape is listed under Ford specification #ESFM3G164-A.

At Spring Mills Manufacturing, Inc., we provide reliable solutions to nagging problems faced by many industries and end users. Our miniature model airplane electronic ignition coil is a compact, durable product that will last many years. Many model airplane enthusiasts have watched in vain as the time and effort they put into their plane was ruined as their plane crashed to the ground due to an ignition coil failure. As an airplane enthusiast, our designer felt that he could design and produce a better coil. For years now, the Gettig ignition coil, now exclusively produced by Spring Mills Manufacturing, has been trusted to provide the needed power and reliability to model planes. The Gettig ignition coil is 1.25" long and has a diameter of 0.75" with a total weight of 1.16 ounces. It is designed for a nominal operating voltage of 2.4 V to 3.0 V, has a primary winding resistance of 0.6 Ω, and a secondary winding resistance of 1, 200 Ω. The size of our coil is more compact than most, allowing it to fit into most all ignition systems. For more information about our miniature model airplane electronic ignition coils, see the table below, or contact us directly.

At Spring Mills Manufacturing, Inc., we produce some of the most innovative products available. Our Ti-Ez neck tie organizer is a compact, effective solution, to a long-standing inconvenience. Most neck tie organizers are bulky, built with gimmicky electronics, or difficult to use. The Ti-Ez contains no electric motors and allows users to see all of their ties without rifling through a pile. It is available in sizes which hold 25, 50, or 100 neckties and works using a simple, yet durable, pinch mechanism to hold the tie at the fold. Because it is lightweight, the Ti-Ez can be mounted almost anywhere with the included simple hardware packet. Ties can be stored on the back of the door or in a closet while taking up minimal space. The freedom to store ties in any order allows the user to sort by pattern, color, or occasion, without having to reshuffle everything every time a tie is removed. Removal is also simple; a simple sliding motion is used to remove the tie from the holding pins. Its simple, innovative design means the Ti-Ez will last for years. This patented design is exclusive to Spring Mills Manufacturing and available through our website. For more information about the Ti-Ez neck tie organizer, see the table below, or contact us directly.