Post Buy Requirement
ST
United States
Add Review

Our Products

Filter Blanket

  • Size 48” x 100’
  • SKU W-222
Never change numerous 20 x 20 filters again. Order our filter blanket 100 roll and a set of quick locks and change your filters quick. Just cut the size filter you need and clip into the Quick Locks at the top and bottom and youre set to go! The blanket filter fits over your existing filter grids.

Our dense heavy-duty two-stage 22g media is 50% heavier than the 15g counterpart. Manufactured from continuous strands of glass fibers with 2.5 loading area backed with 100% fiberglass scrim backing. Compliant with current EPA standards as well as many local municipal regulations. The 22g fiberglass construction provides excellent removal efficiency at an affordable price.
View Complete Details

Ductwork Package

  • SKU DW24PKG
We have the paint booths accessories that you need, including paint booth exhaust kits. Paint booth exhaust duct kits transfer the exhaust fumes out of the building, as required by NFPA 33 guidelines. Standard Tools and Equipment can provide you with an exhaust duct kit for your booth, allowing you to vent the exhaust air out through the roof of your building. The duct kit is made of 20-gage galvanized steel. Most codes require that 6-feet of duct work exist above the roof penetration point. The ducting diameter will vary depending on the size of the exhaust fan provided with your paint booth. The kit will need to be assembled on-site. If shipped with your booth, you will not be responsible for any additional shipping costs.
View Complete Details

Paint Booth

The purpose of any exhaust filter is to capture over-spray particles and remove them from the airstream. Exhaust filters play an important role in maintaining proper air flow, cleanliness of exhaust stacks and maintenance of the exhaust system. It is recommended that premium filters be used throughout the paint booth.

Improperly maintained spray booths may increase the risk for fires in the booth and may result in non-compliance of emission standards. When filters are used longer than they should, they are saturated with overspray, causing blockage and bad airflow in the booth. This causes an increase in costs from a number of ineffective painting situations. Contaminants blocking the overused filters cause longer drying times and more dirt in the paint jobs, meaning more buffing. There are also more costs for heated equipment because of burner corruption and bad airflow.

These are filters designed to be used in a Standard Tools' booth but will work in any style designed to use 20x20x2 dry arrestor exhaust filters. UL Class II, 98.6% efficient and a woven polyfiber.

Clean Filters = Clean Air! Change exhaust filters when the manometer reads 0.5" above the initial differential reading.
View Complete Details

Quick Clips

  • SKU W-218
For use with our filter blanket media. Cut to size, attach at the top and bottom of each filter section in your booth. The filter blanket snaps into the quick locks at the top and bottom. Easily change your filters.
View Complete Details

Pre-filter

  • Dimensions 20" x 20"
The Pre-Filter (or Ultra Filter) from Standard Tools is used along with the Bag Filter from Standard Tools for powder coating booths, fine dust or sanding dust. With Bag Filter Powder Coating. Retains 90% of the airborne dust exhausted from the booth (before it enters the bag filter). Can be vacuumed repeatedly for cleaning.

Dimensions = 20" x 20"
Case of 12

* Free shipping is available on these items when they are shipped within the lower 48 US states. Shipping to Hawaii, Alaska, or any country outside of the US will have additional shipping charges applied.
View Complete Details

Paint Booth Tacky Intake Filters

  • Dimensions 20" x 20"
Intake filters are as important to a great paint job as the booth itself. The intake filters are the primary defense against foreign particles landing on the painting surface.

These intake filters are constructed of a 12" dry air entering layer and a 12" leaving air layer with non-migrating super tack.

UL Class II rated.
Internal galvanized steel frame with two crossbars make these filters sturdy and self-supporting.
Clean Filters = Clean Air! Intake filters should be changed when they appear dirty or every 100 hours of booth usage.

Its quick and easy to change out your paint booth filters. As an easy reminder to change out your intake filters, always keep some in stock so you have them when you need them.

Dimensions = 20" x 20"
Case of 20

* Free shipping is available on these items when they are shipped within the lower 48 US states. Shipping to Hawaii, Alaska, or any country outside of the US will have additional shipping charges applied.
View Complete Details

Floor Covering

Blue Diamond Paint Booth Floor Covering The paint industrys newest flame retardant, reusable spray booth floor covering.
Excellent floor protection for all paint & chemical coating environments
Chemically resistant
Anti-static
Flame retardant (NFPA 701-04)
Diamond pattern for no slip foot traction
Will not tear under weight of heavy machinery
Dried overspray easily peels or chips away from the Blue Diamond surface
View Complete Details

Bag Filters

  • Dimensions 20" x 20" x 15"
The Bag filter from Standard Tools is highly efficient at overspray collection from powder paint applications, sanding jobs or fine dust filtering. The course layer facilitates overspray collection and retention, along with a second layer designed to trap finer particles. Heat-sealed to a heavy-gauge metal support frame so it is easy-to-handle and self-supporting. Designed as a secondary filter to be use with a primary pre-filter (or ultra-filter).

Dimensions = 20" x 20" x 15"
Case of 4

* Free shipping is available on these items when they are shipped within the lower 48 US states. Shipping to Hawaii, Alaska, or any country outside of the US will have additional shipping charges applied.
View Complete Details

Final Stage Filters

  • Dimensions 20" x 20" x 4"
Breathe easier with a 95% efficient filter. Designed as third-stage filtration in the Standard Tools and Equipments optional final filter box that can be installed on top of the exhaust fan of a powder coating booth. Merv filters need to be changed when the filter body or pleats become worn or damaged to avoid restricted airflow that can cause your system to work inefficiently or possibly even damage it.

Made of pleated polyfiber and rugged plastic outer body

Can be vacuumed repeatedly to clean but should be replaced when the filter body or pleats become worn or damaged

Dimensions = 20" x 20" x 4"
Case of 3

* Free shipping is available on these items when they are shipped within the lower 48 US states. Shipping to Hawaii, Alaska, or any country outside of the US will have additional shipping charges applied.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Standard Tools & Equipment Co.)
  • Greensboro, NC 27405 map, United States
  • Share us via