Post Buy Requirement
SW
United States
Add Review

Our Products

Distribution Cables UL Type OFNR

MECHANICAL, ENVIRONMENTAL & FLAME CHARACTERISTICS:

Crush Resistance EIA-455-41 2, 000 Newtonscm
Impact Resistance EIA-455-25 2, 000 Impacts with 1.6 newton-meter
Flexure EIA-455-104 2, 000 Cycles minimum
Minimum Bend Radius Long-term - No Load 10 x Cable diameter
Minimum Bend Radius Short-term - Load 15 x Cable diameter
Operating Temperature -20 C to 70 C
Storage Temperature -40 C to 80 C
UL Rated Type OFNR
Flame Resistance UL 1666 Passed
USES: Riser wiring, office wiring, and computer room wiring.

PRODUCT FEATURES: 900 m tight buffered fibers. Color coded for easy termination. Flame-retardant. UL listed for code compliance
View Complete Details

Harness Systems Strain Relief

MATERIALS:
-30 Conforms to SAE-AS817651, unlined.
-31 Conforms to SAE-AS817651, lined with standard adhesive.
-32 Conforms to SAE-AS817651, lined with high performance adhesive.
COLOR: Black.
USES: Heat shrinkable materials are supplied in an expanded form and cover a wide dynamic range, reducing the need to stock a large inventory of sizes. There are 9 sizes of strain relief boots for a range of shell sizes from 6 to 48. Heat shrinkable molded shapes provide mechanical protection and strain relief for connectors and can be used to form breakouts. The combination of heat shrinkable tubings and molded shapes provides an encapsulated wire harness assembly for maximum environmental protection.
View Complete Details

Burglar Alarm

CONDUCTOR: Solid bare copper.
INSULATION: PVC.
CONSTRUCTION: Parallel conductors.
JACKET: PVC.
COLOR: White.*
VOLTAGE: 300 V 150 V.
UL: CM CL2 CL3 (R).
USES: For use as burglar alarm wire and as telephone station wire. Good for surface installation in factories, commercial buildings, and homes in compliance with the National Electric Code, NEC article 725 type CL3 or NEC article 800 type CM, as applicable.
View Complete Details

Unshielded Multi-Conductor

CONDUCTOR: Solid bare copper.
INSULATION: Polyethylene.
CONSTRUCTION: Unshielded, cabled.
JACKET: PVC.
COLOR: Gray.*
VOLTAGE: 300 V 150 V.
UL: CM CL2 CL3 (R).
USES: Public address systems, burglar alarm systems, unbalanced intercom systems, interconnecting cables, remote control circuits, and low voltage relay control systems in compliance with the National Electric Code, NEC article 725 type CL3 or NEC article 800 type CM, as applicable.
View Complete Details

CAT 6 600 MHz UTP

CONDUCTOR: Solid bare copper.
INSULATION: FEP.
JACKET: Low smoke PVC 75 C.
COLOR: Blue.*
VOLTAGE: 300 V
UL: CMP
CONSTRUCTION: Twisted pairs, varying lays to minimize cross talk, each pair is banded with insulation color mating conductor, nylon rip cord, cabled. These cables are ETL verified to EIATIA 568B.2-1. Swept tested up to 600 MHz.

USES: Provides bandwidth required for multimedia, broadband video, analog video and other future applications.

Pair Colors: WBL with BL, WOR with O, WGR with GR, WBR with BR.
View Complete Details

Right Angle Boot

MATERIALS:
-30 Conforms to SAE-AS817651, unlined.
-31 Conforms to SAE-AS817651, lined with standard adhesive.
-32 Conforms to SAE-AS817651, lined with high performance adhesive.
COLOR: Black.
View Complete Details

Cable Breakout Boot

RIAL: Semi-rigid, flame-retardant, polyolefin, per SAE-AS817651.
DESIGN: Meets or exceeds Navsea Diagram No. 803-5001027.
USES: Heat shrinkable boots can be used for cable splices, breakouts, transitions, and any applications requiring water tightness. They provide excellent insulation, corrosion and weather resistance, as well as abrasion and mechanical protection.
View Complete Details

Low-Profile Boot

MATERIALS:
-30 conforms to SAE-AS817651, unlined.
-31 conforms to SAE-AS817651, lined with standard adhesive.
-32 conforms to SAE-AS817651, lined with high performance adhesive.
COLOR: Black.
View Complete Details

Instrumentation Control Cable

  • AWG Size 24
  • Jacket Thickness 0.025 in 0.635 mm
  • No. of Cond. 2
CONDUCTORS: Stranded tinned copper.
INSULATION: 0.010" semi-rigid, -55 C to 105 C PVC Type "B" to MIL-DTL-16878D.
VOLTAGE: 600 V.
CODED: Numbered consecutively in black on white.
CABLED: Round with fillers where needed.
JACKET: Black flexible PVC, -40 C to 105 C.

USES: Interconnecting cables for electronic equipment, telemetering, and instrumentation control. Resistant to flame, moisture, and many oils and chemicals.
View Complete Details

Harness Systems Boots

MATERIALS:
-30 Conforms to SAE-AS817651, unlined.
-31 Conforms to SAE-AS817651, lined with standard adhesive.
-32 Conforms to SAE-AS817651, lined with high performance adhesive.
COLOR: Black.
USES: Heat shrinkable materials are supplied in an expanded form and cover a wide dynamic range, reducing the need to stock a large inventory of sizes. There are 9 sizes of strain relief boots for a range of shell sizes from 6 to 48. Heat shrinkable molded shapes provide mechanical protection and strain relief for connectors and can be used to form breakouts. The combination of heat shrinkable tubings and molded shapes provides an encapsulated wire harness assembly for maximum environmental protection.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Standard Wire & Cable Co.)
  • Rancho Dominguez, CA 90220-6109, United States
  • Share us via