Post Buy Requirement
SI
United States
Add Review

Other Products / Services

Brass Tube

  • Machinability (260) = 30 (330) = 60
Round Brass Seamless Tubing, Specified by OD and Gauge.

Brass tubing in these 4 alloys are used for many general applications in the pump and power industries. C330 Alloy is the preferred alloy when machinability such as threading and cutting is a requirement. Alloys C260 and C272 are used when bending or coldworking are a requirement.
View Complete Details

Aluminum Bronze Plate

  • Tensile 85000 psi
  • Yield 35000 psi
Aluminum bronze has high strength, wear resistance and excellent weldability.

Standards
ASTM B 169, ASME SB-169, Temper M20 (Soft)

UNS Designation Number
UNS C61400

Nominal Chemicals
Copper 91.0%, Aluminum 7.0%, Iron 2.0%, Zinc 0.2%

Machinability
30, Electrical Conductivity 14% IACS

Average Physical Properties (Tensile)
85000 psi

Average Physical Properties (Yield)
35000 psi

Average Physical Properties (Elongation)
42 %

Average Physical Properties (Brinell Hardness)
153

Size Range
0.50 up to 3.75 thick by 36 to 48 wide by 96 to 120 long (all other sizes on application. Please inquire)
Size range: 0.125 up to 0.375 thick by 36 wide by 96 long
View Complete Details

Aluminum Nickel Bronze Round Rod

  • Size Range 0.6304” up to 9.85”
  • Average Physical Properties (Elongation) 10 %
Aluminum nickel bronze is widely used when greater strength that aluminum bronze is required, such as for cam bearings, pump agitators, shafts and aircraft parts.
View Complete Details

Admiralty Brass Condenser Tube

  • Standards ASTM B 111, Temper 061 (Annealed)
  • UNS Designation Number UNS C44300
  • Stock Length up to 33 ft
Arsenical Admiralty condenser tubes are used for condenser and heat exchanger applications.
This tube offers outstanding heat transfer capabilities and corrosion resistance in fresh and salt water.
View Complete Details

Copper Rod Round

  • Lengths 12' Standard
Specifications

Standards
ASTM B 187

Alloys
C102
C110

Tempers
H04 (Hard)

Size
Flats thickness 18" to 1"
Flats width 12" to 6"
Rounds - drawn 18" to 3"
Rounds - extruded 2" to 6 14"
Squares 14" to 2"
Subject to die availability; please inquire for specific sizes

Lengths
12' Standard

Packaging
38" and larger - bundles, on pallets
smaller than 38" - wooden cases
View Complete Details

Rectangular Copper Bus Bar

  • Hardness F80
  • Elongation 18 %
Standards
ASTM B 187, Temper H04 (Hard)

UNS Designation Number
UNS C11000 ETP

Nominal Chemicals
Copper 99.9%

Machinability
20 (F.C. Brass =100)

Average Physical Properties (Tensile)
40000 psi

Average Physical Properties (Hardness)
F80

Average Physical Properties (Elongation)
18 %
View Complete Details

C145 Tellurium Copper Rod

  • Tensile 45000 psi
  • Hardness F80
Specifications Specification Table

Standards
ASTM B301

UNS Designation Number
UNS C145 Tellurium Copper

Nominal Chemicals
Copper 99.50%, 0.008 (P), 0.55 (Te)

Machinability
20, Electrical Conductivity 101% IACS

Average Physical Properties (Tensile)
45000 psi

Average Physical Properties (Hardness)
F80

Average Physical Properties (Elongation)
18 %
View Complete Details

Aluminum Bronze Sheet

Aluminum bronze has high strength, wear resistance and excellent weldability.

Standards
ASTM B 169, ASME SB-169, Temper M20 (Soft)

UNS Designation Number
UNS C61400

Nominal Chemicals
Copper 91.0%, Aluminum 7.0%, Iron 2.0%, Zinc 0.2%

Machinability
30, Electrical Conductivity 14% IACS

Average Physical Properties (Tensile)
85000 psi

Average Physical Properties (Yield)
35000 psi

Average Physical Properties (Elongation)
42 %

Average Physical Properties (Brinell Hardness)
153

Size Range
0.50 up to 3.75 thick by 36 to 48 wide by 96 to 120 long (all other sizes on application. Please inquire)
Size range: 0.125 up to 0.375 thick by 36 wide by 96 long
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Stebco, Inc.)
  • Hatboro, PA 19040 map, United States
  • Share us via