Post Buy Requirement
SS
United States
Add Review

Our Products

Anotec High Silicon Tubular Anodes

  • Anode Type 2260 Z
  • Length (in.) 60
  • Weight (lbs.) 37
  • Diameter (in.) 2.2
  • Anodes/ Crate 10
Optimizes metal structure and consistency of weight and dimensions.
Zinc connector hydraulically pressed into taper seat at anode center withstands 1000 kg cable tension and 1000 kg dislodgement force.
Quality controlled process outperforms 0.001 ohms criterion for connection resistance.
Epoxy encapsulation design optimizes reliability.
Improved impact resistance and shipment reliability.
Enhances Deep Well utilization.
Quality Control ISO 9001
Anodes are manufactured, inspected and tested in accordance with documented procedures.
View Complete Details

Insulseal Waterproof Membrane

  • Property Thickness
  • Test Method ▾ ASTM D-412
  • Results +40ºF to +130ºF
The Protecto Wrap InsulSeal 30 Sheet Membrane Insulating Jacket System consists of a 30-mil total thickness SBS modified rubberized asphalt membrane laminated to a heavy-duty black polyethylene film on the face and a siliconized, removable, release sheet on the adhesive side. The factory controlled thickness assures uniform thickness on the job, while the inherent waterproofing properties of the SBS modified rubberized asphalt membrane provide waterproofing protection to insulated piping and equipment, helping to assure the thermal performance of the insulation and provide energy savings. InsulSeal 30 is provided in 36" wide by 100' long rolls.
View Complete Details

Heat Shrink Splice Kits

CANUSA CASE Anode Splice Encapsulation Kits provide a convenient method of Environmentally sealing and encapsulating anode cable for inline Y, or parallel splices. A single splice kit covers many size cables and ensures a mechanically strong, electrically insulated splice that is sealed from contamination.

CASE kits contain all the materials required to completely encapsulate standard split bolt or compression splices and eliminate time consuming taping. The entire kit installs in minutes and when used with the CANUSA CRLS RAIL-LESSe repair sleeve, will provide a permanent environmental seal, with excellent insulation characteristics, and is ready for direct burial immediately after installation.

FEATURES

EASY INSTALLATION - CASE Anode Splice Encapsulation Kits provide an easy method of sealing splice connections while reducing labor costs. CANUSA CRLS RAIL-LESSI!> repair sleeve provides a fast, simple, and clean insulationconnection
system. The sleeving will not split or rupture during normal installation, even when overheated. CRLS sleeving can be installed at temperatures as low as -40 degrees Celsius.

ENVIRONMENTAL SEAL - The CRLS sleeving provided in the CASE Anode Splice Encapsulation Kit is coated internally with a dual purpose thermoplastic liner and when used with the CTSG sealing tape, and heated, will encapsulate the cable splice connection and provide the mechanical strength of a superior adhesive with the environmental sealing capability and corrosion protection of a high quality mastic
View Complete Details

Zinc Grounding Cells

  • TYPE Two Anode Unit
  • DIAMETER 7" O.D.
  • OVERALL 75
  • APPROXIMATED GROSS WEIGHT (including backfill) 230 pounds
Pre-packaged zinc grounding cells from Federated Metals provide low resistance across an insulating joint without excessive loss of cathodic protection current.

Features:

-Unprotected pipe
-Insulated flange
-Cathodically protected pipe
-Insulated copper wires connecting zinc anodes and pipeline
-Two 60" zinc anodes separated by insulating spacers
-Low resistance backfill surrounding

Zinc grounding cells from Federated Metals provide positive, long-life protection wherever voltages must be limited in underground metallic systems to reduce danger of shock or arcing and burning of insulated joints_ Typical grounding installations include oil. gas and water pipelines, power stations, oil storage tanks and transmission line towers and cables

Features:
Two or four anode units available.

Pre-packaged for easy Installation in sturdy cardboard tubes with wood ends.

Anodes are 1.4" x 1.4" x 60" HI-PURE'" zinc separated by 1" spacers and tape wrapped

Zinc anode composition conforms to ASTM 8-418-73, Type II.

Low resistivity backfill; 75% gypsum, 20% bentonite, 5% sodium sulfate.

Six feet of insulated NO.6 AWG stranded copp:er conductor silver brazed to:Y'" diameter steel core rods
View Complete Details

Loresco Impressed Current Backfills

Loresco offers a full line of earth contact backfills and related products which are designed and produced exclusively for the corrosion industry. All Loresco backfills begin with high-quality carbons that are calcined to exacting standards. These carbons are further processed to enhance various properties depending upon the specific application or field conditions.
View Complete Details

Asbury Carbon Backfill

  • Grade Designation Calcined Fluid Coke - 250
  • Nominal Size 1/4 x 0
  • Carbon 99.9%
  • Bulk Density lbs/cu ft 60
Carbon is Life
Carbon is the basic building block of all organic substances and is therefore the basis of all living things. Because carbon combines readily with oxygen, giving off heat as a by-product, it is also a vital energy source. Carbon is one of the most useful of all chemical elements and Asbury Carbons is the most experienced processor of carbon products for industry today.

Amorphous carbons such as coal, petroleum coke, pitch coke, active carbon and carbon black have unique physical and chemical properties. These properties enable us to process amorphous carbons for a myriad of industrial applications including chemical reducing agents, carbide forming reagents, metallurgical products, cathodic protection materials and adsorbing carbons just to name a few.

Carbon in the form of crystalline graphite possesses a combination of properties including lubricity, refractoriness, chemically inertness, as well as thermal and electrical conduction. These properties make graphite the material of choice for thousands of end-use applications including crucibles, refractories, cements, lubricants, chemical tank linings, powder metal parts, polymer compounds, drilling fluids, electric motor brushes, batteries, artificial diamonds, and others too numerous to mention.
View Complete Details

Compression Connectors

TYPEYCC COPPER CRIMPIT

Type VC-C copper crimpit connector is a range-taking C
shape compression connector for making tap or parallel
copper connections from # 12 sol to 40 strand
conductors.



TYPES KS & KS-3 SERVIT
For Copper, Copperweld

Compact, high strength. high copper alloy SERVIT split-bolt has free-running threads, and easy to grip wrench flats. Highly resistant to season cracking and corrosion, the SERVIT provides maximum pressure and assures secure connection on all combinations of run and tap conductors. Type KS-3. similar to Type KS. Accommodates 3 maximum size conductors.
View Complete Details

Raychem Shrink Sleeves

  • Product HTLP-80
  • Maximum Temperature 65 ºC - 149ºF
Wrap-around heat-shrinkable sleeve which replicates the structure and performance of mill-applied three-layer PE coatings.

Product Maximum Temperature
HTLP-60 65 C - 149F
HTLP-80 80 C - 176F
Common Applications
Compatible with all commonly used pipe coatings, including PE, coal tar enamel, coal tar epoxy, and fusion-bonded epoxy.

Highlights
Fully resistant to shear forces induced by soil and thermal movements.
Sleeve applied over wet epoxy, with no curing or waiting times.
Superior cathodic disbondment performance and hot water immersion resistance.
Fully reconstructs three-layer coating at all girth welds for continuous and homogeneous performance on pipelines coated with 3LPE.
Low preheat requirements.
View Complete Details

Manhole Encapsulation

WrapidSeal is a wrap around heat shrinkable sheet that has been specifically designed for protection of buried and exposed manhole structures. WrapidSeal is supplied in bulk rolls of varying widths and consists of a cross-linked polyolefin backing, coated with a protective heat activated adhesive. A separate closure is used to create a complete sleeve with the adhesive effectively bonding to the substrate, providing corrosion protection and adhesion for the impermeable backing.

Heat activated, high shrink membrane
Torch-applied, shrinks to fit profile
High tensile & elongation
Accommodates movement
Excellent abrasion resistance
Tough product, resists soil stress
Bulk roll
Fits any size manhole
Complete coverage
Reduces ground water infiltration
Provides corrosion protection
Extends service life
Once installed, the system creates a barrier to water infiltration and effectively protects the manhole support structure and frame from ground moisture, preventing corrosion and freeze-thaw damage. In below grade vaults or concrete lines, WrapidSealTM is used to minimize water infiltration, reducing dewatering costs and loads on waste water treatment facilities.
View Complete Details

Split Bolts

TYPEYCC COPPER CRIMPIT

Type VC-C copper crimpit connector is a range-taking C
shape compression connector for making tap or parallel
copper connections from # 12 sol to 40 strand
conductors.



TYPES KS & KS-3 SERVIT
For Copper, Copperweld

Compact, high strength. high copper alloy SERVIT split-bolt has free-running threads, and easy to grip wrench flats. Highly resistant to season cracking and corrosion, the SERVIT provides maximum pressure and assures secure connection on all combinations of run and tap conductors. Type KS-3. similar to Type KS. Accommodates 3 maximum size conductors.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Stuart Steel Protection Corp.)
  • South Bound Brook, NJ 08880 map, United States
  • Share us via