Our Products #4950858

The Heavy Duty Abrasion Sidewinder Sleeve is best for tough outdoor applications such as covering hose used on the ground, mud pumping for well drilling, remote construction tools and anywhere where severe abrasion protection is needed.

Standard Duty series Python Hook & Loop Straps are designed for economical service applications. All joints are ultrasonic welded and tested.
Cinching Straps are designed for hose bundling: Python Hook & Loop Straps allow hoses to expand and contract as pressure changes.

In additional to the standard 1050 Ballistic sleeve characteristics, the Radiant Shield liner offers thermal properties engineered to meet application needs when working in extreme cold andor abrasive environments.
- Material: Mil-Spec 1050 Ballistic Nylon, 1.7 mil urethane coating
- Temperature Range: -60F (-51C) to +200F (93C)
- Abrasion Resistance: Very good tested to ISO 6945 specifications
- PunctureTear: Good; puncture and tear resistant
- UV Protection: Very good; meets EN13758-1, max rating of 80 NewDry
- Chemicals: Very good resistance to water & oils
- Wicking: Good; sheds surface moisture
- Welding SparksSpall: NOT recommended

Fully assembled solutions complete with pre-filters, PLC, automatic drains and outlet regulator. Ultra systems come mounted on an 80 gallon tank for storing ultra dry air.

The Lube Minder automatic oiler is engineered to lubricate chains and sprockets without ever having to leave the comforts of the equipment's cab again. The fully adjustable pump requires no electricity and can automatically oil up to 10 chains and sprockets. Systems are model specific and sold complete and ready to install.

he Ballistic Nylon Sidewinder Sleeve is the best material for most general purpose applications, bundling hydraulic hosescables, traditional abrasion protection. The 1050B is widely used in agriculture, construction, oil, gas, forestry and mining applications. This material also is used on CE approved equipment for operator protection in the event of hose failure.

Diamondback Sleeve was engineered specifically to meet the EU Machinery Directive 200642EC as well as the NSW "Guideline for Fluid Power System Safety at Mines".

Diamondback uses a proprietary engineered fiber. It is needle woven very tightly and heat treated which shrinks the sleeve about 8% to the finished dimension.

The Teflon Glass Sleeve is used for high temperature applications requiring a wear resistant cover, resistance to acid chemical, resistance to adhesion from tar, asphalt, paint and other coatings that traditionally build up on a surface. It also is widely used as protection for cables and wiring on sensors and harnesses on engine applications. Additional uses for this product are welding shields, engine intake temp control, and battery cable covers.

- Material: Teflon coated fiberglass
- Temperature Range: 550F (287C) constant 650F (343C) intermittent, core fabric 1000F (537C)
- Abrasion Resistance: Good intermittent low force contact
- PunctureTear: Excellent difficult to randomly puncture or tear
- UV Protection: Excellent best barrier, meets EN13458-1, top rating of 80 new
- Chemicals: Excellent inert coating supports use where oils, chemicals, caustic and acids are present without degrading
- Wicking: Excellent

INSULTF is a braided fiberglass sleeving that has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve useability and performance. INSULTF was engineered for applications where temperatures as high as 1200F (649C) may be encountered.

INSULTF may also be used as insulation and protection for small heaters and resistors that operate at high temperatures, and to insulate over soldered connections when exposure to solder melt temperatures is possible.

- Max Temp: 1200F Continuous 2048F Melt
- UL Recognized: VW-1
- For High Temp, Low Voltage Applications
- Easy to Install; Cuts with Scissors
- Resists Most Organic Solvents
- Cut and Abrasion Resistant

- Constructed from a high bulk fiberglass fiber that is woven to produce a hollow sleeve, it is then coated with a thick covering of iron oxide red silicone rubber.
- Can be easily installed over hoses, cables, tubing or pipes. It offers excellent resistance to molten metal splash, radiant heat, abrasion, corrosive atmosphere, moisture, chemicals, vibration, and electricity.
- In addition to protecting hoses, cables, pipes, etc., Fire Sleeve can protect operators from incurring scorching burn injuries on hot braided hoses and pipes. Fire Sleeve's excellent moisture resistance makes it ideal for outdoor applications.