Acid Recovery System in USA

YOU ARE IN : USA / Environment / Pollution Control Equipment / Acid Recovery System

View 31 Products below

  • Prs Blast & Recovery Systems

    • Model : PRS-6

    Using “economical” blast media, such as slag, for industrial blasting can be very costly indeed. Because these low-cost abrasives break down so quickly, reusing them is impractical. As a result, you’re constantly paying for replacement media, disposal of spent media, and manhours to move this material around—all of which can put a big drain on your profits. With Empire’s pneumatic Blast & Recovery System (P More...

  • Prs Recovery Systems

    • Model Number : PRS-6
    • Blast System : Mounts to 650 pot

    Using "economical" blast media, such as slag, for industrial blasting can be very costly indeed. Because these low-cost abrasives break down so quickly, reusing them is impractical. As a result, you're constantly paying for replacement media, disposal of spent media, and manhours to move this material around - all of which can put a big drain on your profits. With Empire's pneumatic Blast & Recovery System (PRS), you More...

  • Prs Recovery Systems

    • Blast System : Mounts to 650 pot
    • Model : PRS-6

    Using "economical" blast media, such as slag, for industrial blasting can be very costly indeed. Because these low-cost abrasives break down so quickly, reusing them is impractical. As a result, you’re constantly paying for replacement media, disposal of spent media, and man-hours to move this material around-all of which can put a big drain on your profits. With Empire’s pneumatic Blast & Recovery System (PRS), More...

    Kleen Blast

    | More...

  • Contaminated Refrigerant Recovery Machine

    • Compressor : 1/2 hp oil-less, twin cylinder
    • Refrigerants : Contaminated R-134a and R-1234YF
    • Capabilities : Vapor, liquid recovery

    Contaminated only recovery for R-134a and R-1234yf MVACs Motor vehicle air conditioner (MVAC) refrigerants can become contaminated from outside elements, other refrigerants from improper servicing, or in many other ways. If you have identified that the refrigerant in the vehicle you are servicing is contaminated, you must recover it before repairing or recharging. The best way to recover contaminated or unfamiliar re More...

  • Heat Recovery System

    Stationed in Trujillo Alto(United States), our organization is one of the prime most providers in the industry today. We are committed towards providing quality-assured products to the customers and thus we check them stringently before making the final dispatch. The Flash-Economizer System : Complete packaged heat recovery system in a smaller single vertical tank design. Ten different Pre-Engineered systems for smal

    Power Combustion Technology, Inc.

    Mount Dora | More...

    https://www.powercombustiontechnology.com/heat-recovery-system.htm

  • Exhaust Gas Recovery System

    Flexible Metal has extensive experience designing and manufacturing Exhaust Gas Recovery assemblies for gasoline and diesel engines. The company’s capabilities include bellows forming, machining, tube bending, tube forming and sizing, and major joining processes including MIG and TIG welding, resistance welding, furnace brazing and induction brazing.

  • Post your Buy Requirement

  • Heat Recovery Systems

    Increased energy costs have made heat recovery a priority in the Pulp & Paper and other industries to reduce a large portion of production costs. Highly-efficient heat exchangers can capture the heat that is vented during paper drying and other plant processes. The recovered heat can be used in numerous applications in your paper mill, including space heating, preheated feed water, even as a heat source in the paper

  • Spot Blast Recovery System

    Convert your Speed Blaster™ into a spot blaster in seconds, without tools, with the Hot Spot™ HS2020 Spot Blast Recovery System. HS2020 turns your Speed Blaster into a self-contained spot blast system capable of virtually eliminating blast overspray. Simply attach one of the four blast cones provided, push the HotSpot™ over the Speed Blaster’s ceramic nozzle and go. The individual shapes of the four blast con

  • Ecodrive Energy Recovery Lift System

    Efficient energy recovery Energy recovery thanks to built-in frequency converter The Hänel EcoDrive®, which was first unveiled at CeMAT 2008, is an integral part of the Hänel EcoConcept. Since its launch, this system has been continuously developed and improved. The Hänel EcoDrive® helps to save energy and consequently to reduce costs. The frequency converter uses the energy of the descending extractor and conve

  • Vapor Recovery Systems

    PEI's Recommended Practices for Installation and Testing of Vapor-Recovery Systems at Vehicle-Fueling Sites provides concise instructions for installation and testing of Stage I and Stage II equipment. Includes a chapter on decommissioning Stage II vapor-recovery piping and references the most recent CARB revisions.

  • Anchor Recovery System

    The EOM Anchor Recovery system incorporates a line spool at the mooring's acoustic release, enabling haulback of the anchor. When the release is triggered, a line attached to the anchor pays out from the line spool as the bottom of the mooring is brought to the surface. Synthetic line of sufficient strength and length is loaded on the spool at EOM using a careful process to prevent fouling.

    Eom Offshore, Llc

    | More...

  • Heat Recovery System

    The modular and compact design of our Exhaust Gas Heat Recovery system ensures low backpressure and low actuating torque. The system extracts heat through a heat exchanger. The recovered energy is used to heat up powertrain fluids, resulting in the reduction of viscous losses and improved fuel economy. This system can warm up the cabin and defrost the windshield faster for increased passenger comfort. It can also be

  • Abrasive Blast Recovery System

    Designed for contained open or vacuum blasting, the VB1200 system blast abrasive through two blasting outlets onto the surface being finished. Our high powered rental vacuum units recover the spent abrasive where the dust and waste are separated . The used abrasive is recycled and returned to the storage hopper for reuse.

  • Condensate Recovery Equipment

    Condensate recovery allows you to use all of the valuable Btu within the steam system. Depending on the pressure, condensate leaving a trap contains approximately 20% of the heat energy transferred at the boiler in the form of sensible heat. Condensate recovery systems help you reduce three tangible costs of producing steam: Fuelenergy costs Boiler water make-up and sewage treatment Boiler water chemical treatment Th

  • Heat Recovery System

    ComenCo’s Heat Recovery Systems are designed to help you make optimal use of your existing energy expenditures by re-using heat generated during your industrial process. The heat energy can then be redirected elsewhere resulting in increased energy savings and reduced energy costs. Operating temperatures in many process industries can reach 2000 degrees Fahrenheit depending upon design features. By selecting the co

  • Solvent Recovery Systems

    In a Carbon Adsorber, a contaminated process stream flows across an activated carbon bed. The carbon removes the VOCs from the process stream and absorbs them, holding them on the surface and in its pores. The VOC-free air is exhausted to atmosphere. Carbon is a great adsorber of organic materials like low molecular weight VOCs.

  • Pressure Washer Recovery System

    Landa’s revolutionary ECOS pressure washer recovery system recovers, cleans and recycles the dirty water from pressure washing for safe disposal or reuse—meeting most municipal and environmental regulations. And the fuel burner savings from the patented Trans-Heat Technology allows for a fast return on investment. Call a MCP to learn how your fuel savings can help make your lease payment on a new ECOS pressure wa

  • Post your Buy Requirement

  • Acid Waste Systems

    George Fischer’s Fuseal and PPRO-Seal offer excellent chemical and corrosion resistance. The chemical and physical properties of fuseal make the system ideal for handling corrosive chemical waste solutions present in laboratory and industrial DWV applications. Fuseal has applications in chemical and industrial plants, hospital and university laboratories where mixtures of acids, bases and solvents are drained. PPRO

    Corr Tech, Inc.

    | More...

  • Nucleic Acid Purification System

    Deals in Autoclave, Plant Growth Chamber, Homogenizers, HPLC, fumehoods, Microscopes, airflow, Ovens, nucleic acid purification system, Water Baths, bioreactors, uv transilluminators, Safety Cabinets, Shakers, Medical Equipment, electrophoresis, Balance, Laboratory Equipment, laminar, Spectrophotometer

    Labnics Equipment

    Fremont | More...