Auto Ball Bearings in USA

YOU ARE IN : USA / Industrial Supplies / Bearings And Bearing Components / Auto Ball Bearings

View 91 Products below

  • Bl Sealed Radial Ball Bearing

    • Bore Dia. : 0.500" (1/2")
    • Bore Tolerance: : +0/-0.008 mm
    • Quantity : 1
    • Width : 10mm

    Precision ground bearings. These ABEC-1 tolerance bearings have precision ground deep-groove races on both the inner ring and outer ring, which enables them to sustain moderate axial loads as well as high radial loads. Balls are separated by a pressed steel cage. More...

    Intech Bearing, Inc.

    Houston, Tx 77023 Map | More...

  • Self-aligning Ball Bearings

    • degrees : 4 to 7

    This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capa More...

    Baldwin Supply Co.

    Fargo, Nd 58102 | More...

  • Ball Bearings

    • Sizes : 1-15/16 inches (49 mm)

    Ball Bearings Request Information Our ball bearings are backed by more than 70 years of manufacturing and technical expertise, and we offer the widest range of duty and performance options, along with many housing, seal and mounting choices. With a legacy of performance and quality, Link-Belt ball bearings are trusted leaders when you need a ball bearing that will lend uptime, quality and performance to your applicat More...

    Rexnord Industries, Llc

    Milwaukee, Wi 53214 | More...

  • Pobco Self Sealing Spring Loaded Ball Bearing

    • OD- Tube ID : 1.610"
    • Part No. : BBD 24P4007SLSS
    • FD- Tube Dia. : 1.854"
    • Tube Size : 1-1/2" Sch. 40
    • D : .250"

    POBCO Self Sealing (Blind Bore) Spring Loaded Ball Bearing, These bearings are ideal for the food processing industry. They are sealed to avoid moisture and bacteria build up in the tube. Benefits include: ease of fit, ease of cleaning, lower friction, corrosion resistant, eliminates need for stainless steel axles, no need for lubrication and maintenance free. More...

    Pobco Plastics

    99 Hope Ave. Worcester, Ma. 01603 | More...

  • Angular Contact Ball Bearings

    • Standard Designs : 6000 Series Deep Grouve Ball Series - including self-aligning inner race 7000 Series Angular Contact - single and matched pair Type QJ Four-Point Contact

    Radial & Angular Contact Ball Bearings ERIKS has a unique blend of application experience in ball bearing applications that span the use of heavy-duty applications such as power transmission to the employment of precision class angular contact ball bearings in optics-gimbal assemblies. The design and integration of bearings into the use of motor and geartrain is also a core competency of ours. Let us help you with yo More...

    Eriks Seals And Plastics, Inc.

    Fort Worth, Tx 76155 Map | More...

  • Precision Maintenance Free Bearing 2z Deep Groove Ball Chinese Bearing 6317

    • Color : Solver
    • Number of Row : single
    • Outside Diameter : Multisizes
    • Application : Automobile, Industrial, Machinery
    • Standard : ISO9001
    • Material : Chrome Steel
    • MOQ : 1
    • Seals Type : Glass Reinforced PTFE Seal
    • Type : Deep Groove Ball Bearings
    • Surface Finishing : Galvanized, Painted, Powder Coated
    • Brand Name : sunbearing
    • Feature : High Dimensional Accuracy, Honing Raceways, Long Life, Smooth Runnig
    • Bore Size : Multisizes

    Product Name Deep Groove Ball Bearing Structure Ball Bearing Bore Size 50 mm Outside Diameter 180 mm Width 41 mm Material GCR 15, Stainless steel etc. Cage GCR 15, Stainless steel etc. Weight 4.28kgs Number of Row Single Contact Arya Guan  Email:aryaguan@shengyaowang.com Official website:www.sunbearing.net WhatsApp:+8618340853459 More...

  • Thrust Ball Bearing

    • Size range: : 228.6 mm to 1371.6 mm

    Type TVL-Angular Contact Thrust Ball Bearing Type TVL thrust ball bearings provide exceptionally low friction, cool running and quiet operation at high speeds and also are less sensitive to misalignment. We designed TVLs for thrust loading, but it will also accommodate some radial loading. Size range: 228.6 mm to 1371.6 mm (9 in. to 54 in.) Design Attributes: Precision ground and lapped steel balls are enclosed by ha More...

    Timken Drives Llc

    Fulton, Il 61252 Map | More...

  • Instrument Ball Bearing

    • Bore : 0.0937
    • OD Fraction : 3/16"
    • Bore Fraction : 3/32"
    • W Fraction : 1/16"

    Rainbow Precision Products has a large selection of miniature bearings and instrument series ball bearings with many types available. Precision tolerances from ABEC-1 through ABEC-9 are generally available for most miniature applications. Bore sizes of miniature ball bearings start at 1 mm with an outside diameter of 3 mm More...

    Rainbow Precision Products

    Murrieta, Ca 92562 Map | More...

  • Post your Buy Requirement

  • Ball Thrust Bearings

    • Model No. : H-19B
    • Thickness (in.) - C : .448 - .458

    At ART Technologies, our focus is on the customer. We provide rapid, effective and highly competitive solutions for your Thrust Bearing needs. ART Technologies offers an extensive line of high quality ball bearings for your applications. Our bearings are manufactured in the USA at our facility in Hamilton, OH. We ship these bearings to seven different countries maintaining competitve pricing. More...

    Art Metals Group

    Hamilton, Oh 45015 Map | More...

  • Swivel Shackle Slotted Head Pin Ball Bearing

    • Categories : Stainless Steel Rigging, Swivel Shackles.

    SKU: RF75. Categories: Stainless Steel Rigging, Swivel Shackles. A : 7.9 mm B : 17.0 mm C : 60.0 mm D : 15.8 mm P.L. B.L. : 2100 kg U.D.L. B.L. : 2300 kg Shackle Pin Product No. : - Weight : 80 g

    Ronstan International, Inc.

    Portsmouth, Ri 02871 Map | More...

  • E Series Thrust Ball Bearing

    They are used in a variety of medium duty axial load applications. These include pumps, valves, machine spindles, rotary tables, and drilling heads to name a few. ADVANTAGES Inch ABMA standard sizes dimensionally interchangeable with Aetna F series Banded design offers contamination protection Full ball complement for high durability Grooved hardened, precision raceways Single direction

    Aetna Bearing Company

    Franklin Park, Il 60131 Map | More...

  • Deep Groove Ball Bearings

    They are available in a variety of sizes, and are the most popular of all rolling bearings. This type of bearing supports radial and a certain degree of axial load in both directions simultaneously The shielded or sealed deep groove ball bearings simplify the sealing structure of applications and are designed for use with a rotating inner ring. Greasing will not be necessary as these bearings are pre-lubricated.

    River Bend Hose Specialty

    South Bend, In 46601 | More...

  • Radial Ball Bearings

    RBC Aerospace Bearings offers standard and many specialty and custom designed radial ball bearings to the aerospace industry and all major OEMs. RBC’s radial ball bearings are offered in Conrad-type, full compliment, sealed and unsealed designs. These bearings are offered in ABEC 1 through ABEC 7 precision grades, pre-loaded, corrosion protected, grease-lubricated, and are available with numerous separator, ball, s

    Rbc Bearings, Transport Dynamics Div.

    Santa Ana, Ca 92704 Map | More...

  • Angular Ball

    IBSCO offers angular contact bearings manufactured to close tolerances making them appropriate for high-performance applications in the aerospace, medical device and other industries. Angular contact ball bearings are one of the most common types of ball bearings and are designed for a combination of radial and axial loading. With their unique design, angular contact bearings minimize wear and friction and are suitab

    Intercontinental Bearing Supply Co., Inc

    Houston, Tx 77041 Map | More...

  • Ball Bearings

    Bearings Limited offers a wide variety of radial and angular contact ball bearings, as well as linear motion bearings and a complete line of spherical plain bearings (ball bushings). Popular bearing sizes are available in both premium and secondary brands, giving distributors multiple options for filling their customers' needs – all with a single purchase order.

    Bearings Limited

    Hauppauge, Ny 11788 Map | More...

  • Post your Buy Requirement

  • Ball Bearing

    For the smoothest and quietest operating drawers take a look at Custom Service Hardware’s selection of ball bearing slides. These slides ride on ball bearings that provide smooth and quiet operation. They also typically have a release that allows for easy drawer removal, which makes for easy cleaning and repair.

    Custom Service Hardware

    Cedarburg, Wi 53012 Map | More...

  • Instrumentation Ball Bearings

    Small bore miniature and instrument bearings are available in both metric and inch styles. Sizes range from 1mm 0.0400" inside diameter to 26mm 0.8750" outside diameter. They are designed to carry moderate radial and thrust loads at low operating torque while providing high performance within small envelope dimensions. Bearings are available at several price points in various Abec classes in Chrome or Stainless Steel

    Action Bearing

    Boston, Ma 02134-2081 Map | More...

  • Precision Metal Ball Bearings

    Friction, or resistance to motion, is the result of the force acting between two surfaces as they slide against each other. Bearings reduce friction and provide smooth sliding contact between surfaces due to their material, shape or lubrication. Choosing the correct bearing for an application improves efficiency, extends bearing life at high speeds and avoids overheating. Bearings fall into two general categories: ra

    Stock Drive Products/sterling..

    Hicksville, Ny 11801 Map | More...

  • Radial Ball Bearings

    RBC Aerospace Bearings offers standard and many specialty and custom designed radial ball bearings to the aerospace industry and all major OEMs. RBC’s radial ball bearings are offered in Conrad-type, full compliment, sealed and unsealed designs. These bearings are offered in ABEC 1 through ABEC 7 precision grades, pre-loaded, corrosion protected, grease-lubricated, and are available with numerous separator, ball, s

    Roller Bearing Company, Inc.

    Oxford, Ct 06478 | More...

  • Shuster Ball Bearings Highest Quality Standards

    SHUSTER BALL BEARINGS ~ HIGHEST QUALITY STANDARDS Rely on Shuster for value-added bearing solutions, including a full line of Radial Ball Bearings. Shuster delivers outstanding quality at a competitive price, providing you with exceptional value no matter what the application. All Shuster radial ball bearings are produced from high quality, through hardened bearing steel with super finished raceways. Automatic assemb

    Shuster Corp.

    New Bedford, Ma 02741 Map | More...

  • Butt Hinge Ss Ball Bearing

    Austral fire specialise in the supply and installation of fire safety packages to any structure whether being new or refurbished. Our qualified and experienced team of tradesmen have certifications in the supply, installation and maintenance of any fire protection package within australia.

    Austral Fire

    Longboat Key | More...

  • Linear Ball Bearings

    Linear Bearings, Shafting, Guides, Rails, Cams and Wheels QBC offers many linear motion components which can be purchased online. Our frelon® lined bearings can carry 4 to 8 times the load of ball bearings. New line of stainless steel precision shafting features 164" x 45° chamfer at both ends. Guide blocks made of AISI 1055 steel, concentric and eccentric type guide wheels as well as new needle bearing cam followe

    Quality Bearings & Components - Qbc

    New Hyde Park, Ny 11040 Map | More...

  • Ball Bearings

    PIB offers the 600 Series miniature metric sizes ranging from 5 to 9mm bore diameter. They are available in open and shielded in either chrome steel or stainless steel material.

    Pib Bearing, Inc.

    Union City, Ca 94587 Map | More...

  • Self Aligning Ball Bearings

    Self-aligning ball bearings have a spherical outer ring raceway, the center of whose curvature meats that of the bearing itself, so that the inner ring, ball and cage continue to rotate, aligning themselves if they have become misaligned within design limits. This type of bearing is suitable when the displacement of the centers around which the shaft and housing rotate and shaft deflection are likely to occur. Someti

    Akron Bearing Co., Inc.

    Akron, Oh 44306 Map | More...

  • Mounted Ball Bearings

    A modular bearing assembly consists of sealed and lubricated inch or metric ball bearings. It is contained within a variety of housings types, locking mechanisms, mounting styles, and housing materials.

    Bradford Industrial Supply

    Oklahoma City, Ok 73105 Map | More...

  • Ball Bearings

    With more than ninety years of manufacturing expertise in ball bearings, NTN offers one of the industry’s widest arrays of products to fit your application. ball bearings are available to you off-the-shelf, in sizes ranging from 10 mm to 320 mm outside diameters. And with a virtually limitless variety of configurations of seals, shields, lubricants, internal clearances, and cage designs, there’s no reason to go a

    Bearing Service & Supply, Inc.

    Coushatta, La 71019 | More...

  • Precision Ball Bearings

    Precision Ball Bearings A precision ball bearing is chosen in an environment where the bearing can not be routinely lubricated or there may be environmental debris. The precision ball bearing offers easy rolling motion and bearing protection. Two per wheel are used.

    Bond Casters

    Manheim, Pa 17545 Map | More...

  • Commercial Instrument Ball Bearings

    PRECISION, RELIABILITY, AND VALUE, are attributes that you expect in quality commercial instrument ball bearings. On-time delivery is paramount in meeting customer needs. At Pacamor Kubar Bearings, we are committed to delivering quality product, on time, and at competitive prices. As an American owned and operated small business, we have the flexibility to respond rapidly to your needs. With over 40 years of experien

    S/n Precision Enterprises, Inc.

    Troy, Ny 12180-8343 Map | More...

  • Single Row Ball Bearings

    esigned for light loads and speeds up to 1200 RPM Full complement of precision steel balls in deep ball grooves Heat-treated races machined from steel bar stock to a controlled finish Thrust capacity in either direction is 50% of listed radial rating

    Kilian Mfg. Corp.

    Syracuse, Ny 13217 | More...

  • Angular Contact Ball Bearings

    Angular Contact Bearings are generally used in equipment that supports radial and axial loads in a single direction, but can accept thrust loads in both directions when they are mounted in the correct bearing arrangement. In many situations they are installed in sets. Capacity would depend on the contact angle. SERIES INFORMATION: Angular Contact Thrust ball metric ABXS precision 234405 Series – LS Series – MS-L

    Abx Distributing

    Houston, Tx 77092 Map | More...

  • Thin Section Ball Bearings

    Welcome to RBC's on-line Engineering Data Guide for Thin Section Ball Bearings. TO access critical dimensions and data for your design questions, use the Seach By Criteria section below. If you are uncertain as to which of RBC's Thin Section Ball Bearings is best suited for your design application, check with our selection guide. To view an entire product series, select a product from the table of contents.

    Heim Ball Bearings Co.

    Fairfield, Ct 06824 Map | More...

  • Deep Groove Ball Bearings

    EBC offers a complete range of single row ball bearings, double row ball bearings and specialty ball bearings. Many sizes are available in stainless steel for wash-down and corrosive environments.

    Ebc Bearings

    Dallas, Tx 75247 Map | More...

  • Thin Section Ball Bearings

    RBC Aerospace Bearings offers a full line of standard and many specialty and custom designed thin section ball bearings to the aerospace industry and all major OEMs. RBC’s thin section ball bearings are offered in radial contact, angular contact, 4-point contact and sealed radial contact designs. These bearings are offered in ABEC 1 through ABEC7 precision grades, pre-loaded, corrosion protected, grease-lubricated,

    Industrial Tectonics Bearing

    Rancho Dominguez, Ca 90221 Map | More...

  • Ball Bearings

    NHBB manufactures standard and custom designed ball bearing solutions for a myriad of aerospace, defense, dental, high tech, and medical applications. Our product lines feature inch and metric series ball bearings ranging in size from 0.1250 in. to 11 in. O.D. The following product families are described below: miniature & instrument ball bearings , dental bearings, hybrid ceramic bearings, large aerospace ball beari

    New Hampshire Ball Bearings, Inc.

    Chatsworth, Ca 91311 | More...

Related Products

Auto Bearing | Ball Bearing | Angular Contact Ball Bearings | Roller Ball Bearing | Metric Ball Bearings | Deep Groove Ball Bearings

Post your Buy Requirement