Chemical Coating Machine in USA

YOU ARE IN : USA / Tools & Equipment / Coating & Finishing Equipment / Chemical Coating Machine

View 564 Products below

  • High Density Coating System

    • Wire Capabilities: : All Conductive Wires; ? " (3.2mm), 3/32;" (2.3mm), 2mm or 1/16;" (1.6mm)
    • Power Supply : N/S) Conventional 450 Amp. Incoming power; 3 phase multi Voltage at 60 Hz
    • Air Requirements: : 80-100 PSI at 70 CFM. Air inlet no less than ½ " dia.

    Read about our new High-Density Coating System technology that goes into the Jet Force AVD 456HD Arc Spray System. Preset Spring Pressure allows a continuous and precise pressure on the wires at all times and does not change when new wires are loaded. More importantly, the spring pressure adjustment is set to the correct amount not relying on operator experience. Roller Bearing Inlet Guides is a Thermion exclusive fe More...

    Thermion, Inc.

    Silverdale, Wa 98383 Map | More...

  • Coil Coating Equipment

    • Coating Types : Acrylics Polyester Paint Kynar DIP Chemistry Zinc Metalic Acrylic clear coating
    • Maximum Width : Min ____.250____in Max ____100____in
    • Coating Weight : As required (.0001mill and up)

    CMS Industrial Technologies, LLC. is a premier manufacturer of high quality coating equipment that delivers measurable advantages to your production line. Constructed to meet your specific process requirements, our machinery boasts a number of impressive features that will provide you with a technology-forward, high-throughput solution that meets your needs now and has the flexibility to adapt to your growing busines More...

    Cms Industrial Technologies Llc

    Gainesville, Ga 30501 Map | More...

  • Sheet Coating & Gluing Machine: Heavy Duty

    • Sizes : 39, 46, 54 and 60 inch

    The Potdevin Heavy Duty Type Z Sheet Coating and Gluing Machine is designed to accommodate wide sheets of paper, cardboard and corrugated. Large rollers, durable construction for lifetime service and dependability. Sizes: Application rollers available in 39, 46, 54 and 60 inch widths. Electric heater for hot animal glue optional. More...

    Potdevin Machine Co.

    West Caldwell, Nj 07006 Map | More...

  • Coating Broadcasting System

    • Series : Epoxy 600 - Coating Broadcasting System

    Epoxy 600 is a 100% solids epoxy coating broadcast system. Epoxy 600 has excellent chemical resistance properties and applies easily over concrete substrate by brush, roller or squeegee. It is easily mixed using the industry standard 2:1 by volume ratio of resin to hardener. Epoxy 600 dries quickly, usually tack free within 6 – 8 hours, and dries to a high gloss with greater color stability than conventional epoxie More...

    Rhino Linings Industrial

    Houston, Tx 92131 Map | More...

  • Getz Dry Chemical Filling Machine


    • Packing : SKID/BOX
    • Brand Name : GETZ
    • Type : UP 150 LBS DRY POWDER
    • Warranty : N/A
    • Material : N/A
    • Place of Origin : USA
    • Color : WHITE/RED
    • Item : NITROGEN
    • Model Number : VF150D
    • Product Type : VACU FILL

    This product is made in the united states of america comes instructions, capacity up to100 lbs of dry chemical. Filling machine up to150 lbs powder More...

  • Coil Coating Systems

    coil-coating systems eliminate inconsistencies in manual viscosity measurements and adjustments by controlling viscosity with temperature. Saint Clair Systems has developed methods to measure and analyze, in real time, the temperature of coating material across the width and length of the strip, ensuring consistent film builds from edge-to-edge and head-to-tail. With the ability to control material temperature, you c

    Prp, Inc.

    Howell, Mi 48843 Map | More...

  • Post your Buy Requirement

  • Parylene Coating Equipment

    Parylene Equipment Sales and Consulting If you are interested in purchasing your own state-of-the-art Parylene deposition equipment, Para-Coat Technologies can help! We offer Parylene deposition systems and packages that are designed from the ground up based on your needs. With our design experience, process development, training and support, we truly are the best choice for your Parylene needs.

    Para-coat Technologies, Inc.

    Johnstown, Pa 15901 Map | More...

  • Corrosion Resistant Spray Coating Systems

    Spray Quip provides a variety of single and multiple component coating solutions & accesories from brands like Graco, Binks, WIWA, Wagner, etc. Whether fighting or attempting to prevent rust and corrosion, applying multiple-component coatings, or transferring liquids we can supply you with the protective coating equipment that will match your material needs.

    Spray-quip, Inc.

    Houston, Tx 77023 Map | More...

  • Axalta Coating Systems

    Location: Las Vegas Industry: AutomotiveConsumer Size: 80×80 & Larger Industry: Automotive Show: SEMA Painting A Clear Picture Axalta Coating Systems, a leader in the coating industry, tasked Catalyst with creating a “grand slam” experience at SEMA 2016. Their dynamic product range covers the entire spectrum of body shop needs, and is designed to help customers achieve their goals while driving productivity from

    Catalyst Exhibits

    Pleasant Prairie | More...

  • Electrostatic Spray Coating Equipment

    Terronics Electrostatic Sprayers are equipped with ElectroHydroDynamic (EHD) atomisation nozzles. The EHD atomisation nozzles rely solely on electrostatic forces for droplet formation. No mechanical moving nozzle parts that wear out, nor high pressures producing turbulences and drifting airborne droplets. Through over 20 years of nozzle refinement, Terronics has various EHD nozzle designs available for specific coati

    Terronics Development Corporation

    Elwood, In 46036-8907 Map | More...

  • Coil Coating Ventilation System

    With an average pre-painting rate of 700 feet per minute (FPM), ComenCo Systems, Inc.’s Coil Coating Oven and Ventilation System provides a fully automated pre-painting environment for a high quality, uniform coil coating process. What enters the ovens as raw, untreated coiled steel exits as fabrication-ready pre-painted materials ready to be manufactured into washer and dryer housings, automobile bodies, aluminum

    Comenco Systems, Inc.

    Welland, On L3b1g8 | More...

  • Weatherable Coating System

    SDC Technologies has developed an optically clear weatherable hard coating and primer system to complement our globally recognized high performance CrystalCoat™ products. Suitable for flow coat applications, this two-part coating system delivers best-in-class abrasion resistance, exceptional outdoor durability, and premium weatherable UV protection for polycarbonate substrates. FEATURES Outstanding abrasion resista

    Sdc Technologies

    Irvine, Ca 92618 Map | More...

  • Bulk Powder Coating Feed System

    The patented Nordson bulk powder coating material feed system supplies virgin powder directly from a fiber drum to a Nordson hopperfeeder in a continuous, more efficient operation. Features a drum carrier unit, customer drum lid and up to three powder transfer pumps Pumps can deliver up to 200 lbs (91 kg) of powder per hour

    J & M Laboratories, Inc.

    Dawsonville, Ga 30534 Map | More...

  • Post your Buy Requirement

  • Ultrasonic Chemical Mixing Machine. Used For Chemical Processing, Mixi

    Ultrasonic chemical mixing machine. Used for chemical processing, mixing and compounding industries. Mechanical Specifications: 1. (Three) tanks joined as one assembly. Designed for a water based solution containing dilute acids. Material 316 St St. • Three tanks tig welded and pacified per ASTM A967-05 • Material is 316 SSTL GG 14. • Gang box installed for PLC hook up. All terminal block labeled. • Gang box

    Sharpertek Ultrasonics

    Pontiac, Mi 48341 Map | More...

  • Bulk Chemical Delivery Systems

    The Norcimbus Bulk Chemical Delivery System incorporates the exclusive Power Purge V automation-based control system. This flexible control system, coupled with one of the many standard Norcimbus UHP chemical delivery panels, provides a complete liquid chemical delivery system. Norcimbus has designed specific chemical delivery systems for applications such as bulk chemical delivery, multiple tool chemical distributio


    3451 E.harbour Dr | More...

  • Drumquik Pro Chemical Dispensing System

    DrumQuik PRO is an easy-to-use product for extracting chemicals from rigid containers. The closed-system design and rugged construction meet the strict safety requirements of chemical handling applications as well as the demands of harsh operating environments. DrumQuik PRO minimizes chemical exposure and facilitates the delivery of chemicals from bulk transfer containers to end use applications. The coupler is reusa

    Integra Companies

    Devens, Ma 01434 Map | More...

  • Congeal Chemical Melting Equipments

    This is one of our products and you can be rest assured that this product will work perfectly base on your need for it, our products are tested and confirmed to be perfect to match in every need for them.

    Macvre Chemicals

    Dallars | More...

  • Chemical Plant Machines


    We are offering mmc is the world's leading manufacturer of portable instruments for measuring ullage, oil-water interface, temperature, and bottom dryness in shipboard and land-based petroleum and chemical tank systems. All mmc systems are manufactured in the united states and are certified as intrinsically safe by factory mutual, sirabaseefa and csa.


    New York | More...

  • Chemical Filtration System

    The Nuclear, Biological and Chemical (NBC) Filtration System designed and manufactured by Fairchild Controls provides 310 cfm of clean filtered air to occupants for all manned compartments onboard the Expeditionary Fighting Vehicle (EFV) of the U.S. Marine Corp. The engineering team designed the system to be compact and for operation in extremely harsh environment; the Fairchild Controls system has been fielded and p

    Fairchild Controls

    Frederick, Md 21701 Map | More...

  • Roller Coating Machine

    Deals in Cleaning Machine, Reflective Film, Cutting Machine, license plate making machine, car locker, Printing Machine, Car Paint, film stick machine, Hydraulic Press Machine, caution plate, angle mirror, Heat Transfer Printing Machine, Number Plate, road sign, roller coating machine

    Number Plate Factory

    6949 Poudre Canyon | More...

Related Products

Powder Coating Equipment

Post your Buy Requirement