Conveyor Roller Bearing in USA

YOU ARE IN : USA / Industrial Supplies / Bearings And Bearing Components / Conveyor Roller Bearing

View 265 Products below

  • Conveyor Bearings

    • Wt. (lbs.) : 0.52
    • Product No. : HSA588-1713H
    • Length thru Bore : 0.766"
    • Bore : 11/16" Hex

    Rollers are used in many types of conveyors in a wide range of applications. Our broad selection of Conveyor Bearings are used to produce almost any configuration of conveyor rollers, matching other manufacturers in form, fit, and function. Bearing designs are precision or non-precision, open labyrinth or sealed, greased or lightly oiled, swaged or press fit, round or hex bore with load ranges from 40 to 4, 000 pound More...

  • Spherical Roller Bearings

    • Series : SNSK

    Shown in the figures, types EA, C, CD, CA, which are designed for high load capacity, are available. Types EA, C, and CD have pressed steel cages; and type CA has machined brass cages. Type EA has especially high load capacity, features low torque, and has a high-strength cage. An oil groove and holes are provided in the outer ring to supply lubricant and the bearing numbers are suffixed with E4. To use bearings with More...

    Baldwin Supply Co.

    | More...

  • Cylindrical Roller Bearings

    • Sizes : 16 inches

    Cylindrical Roller Bearings Request Information Link-Belt Cylindrical Roller Bearings offer a broad range of configuration options and features to ensure you get the best value on delivery and performance. Utilizing case-carburizing, bearing quality steel and complex geometries, our bearings are designed to consistently perform in demanding applications, and our broad product range includes a bearing for any applicat More...

  • Roller Bearings

    • Series : MR series

    Roller bearings, compared with equivalent sized ball bearings, can handle generally higher loads, at generally lower limiting speeds. Also, given the same load rating, roller bearings are generally more compact than ball bearings. The Enduro roller bearings listed here are of two types: 1. MR series, with their corresponding MI series inner rings. 2. Various track roller types MI series inner rings Designed to work w More...

    Abi Industries

    | More...

  • Spherical Roller Bearings

    • diameter : 12

    These bearings are some of the most versatile and hardest working bearings in our arsenal. Spherical roller bearings are dedicated to extremely severe applications and must support high loads, severe misalignment, contaminated environments, shocks, and vibrations. They can accommodate misalignment as well. Often, they have a tapered bore for use with a matching tapered sleeve, in order to securely install them to the More...

  • Thrust Roller Bearings

    • Type TTHD : thrust tapered roller
    • Type TSR : spherical roller
    • Type TVB : ball
    • Type TP : cylindrical

    Thrust Ball & Thrust Roller Bearings ERIKS offers a wide variety of thrust bearings in needle, roller and ball designs. We also offer many cage configurations and can engineer special cage materials at your request. Steel cage, brass cage and polymer cage designs available as standard. ERIKS has experience in pump designs, heavy lifting apparatus and rail applications. Other applications include actuators and valves, More...

  • Pobco Roller Bearings

    • MATERIALS : Steel, Stainless Steel

    POBCO manufactures a wide variety of ROLLERS. POBCO rollers are used extensively on conveyors and other equipment in standard and custom designs. Our rollers are designed and engineered to provide superior service in the complex field of material handling. The life of a roller is extended by utilizing the largest possible diameter with the shortest possible length to minimize roller deflection. Important dimensional More...

    Pobco Plastics

    | More...

  • Tapered Roller Bearing

    • Size Range : ID 7.937 to 863.600 mm
    • SERIES : TS

    This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the inner race assembly and the outer race. It is typically mounted in opposing pairs on a shaft. Size Range ID 7.937 to 863.600 mm (0.31225 to 34.0000 in.) OD 31.991 to 1060.000 mm (1.2595 to 41.7323 in.) Design Attributes Single cone and cup One-piece pressed steel cage retains rollers on the cone an More...

    Timken Drives Llc

    | More...

  • Post your Buy Requirement

  • Frame Straightening Hi Roller V-bearings

    • Price : $120

    Obtain the extensive and affordable array of products that is available from our massive inventory in Detroit Lakes(United States). With the assistance of skilled professionals and high-grade packaging system, we can easily furnish customized packaging requirements of the customers. Features Easy to operate Smooth operation User-friendly More...

  • Conveyor Elevator Adapter Bearing

    These bearings are mounted units designed for use in equipment where round or hex shafts are supported. They combine a self-aligning bearing with seals, a square mounting flange into a compact pre-lubricated, easily installable unit. Typical applications include conveyor systems, and grain elevators. ADVANTAGES Heavy gauge stamped steel mounting flanges provide for a compact, space-saving design Self-aligning design

  • Track Roller Bearings

    Constructed from balls, rollers or an economical sector pin design Materials such as carbon steel, high alloy steel, stainless, aluminum, engineered polymers Inch or metric dimensions Threaded, non-threaded or eccentric shafts Screwdriver slot, hexagonal socket or hexagonal shaft mountings Cylindrical or crowned outer ring profile Lubrication to accommodate varying temperature extremes Sealed or un-sealed designs and

    Kilian Mfg. Corp.

    | More...

  • Roller Bearings

    Over 60 years of industry experience allows BL to bring distributors the highest quality bearings and power transmission products from around the world. All bearings sold by BL are manufactured to the precise standards of the International Organization for Standardization (ISO) andor the Anti-Friction Bearing Manufacturers Association (AFBMA) in ISO certified factories. Exclusively available in the US from BL, TRITAN

  • Tapered Roller Bearings

    Tapered Roller Bearings All Bond casters designed for extra heavy service and high speed applications offer tapered roller bearings. Two bearings are used per wheel, one in each side of the hub and ride directly on the axle. Bearing adjustment is provided by tightening the legs of the caster against the wheel hub.

    Bond Casters

    | More...

  • Post your Buy Requirement

  • Tapered Roller Bearings

    Tapered roller bearings consist of an inner ring (cone), an outer ring (cup), a cage and rollers which are profiled to distribute the load evenly. They have high radial and axial (thrust) load capacities at low to intermediate speeds. Tapered roller bearings are available in single-row, two-row and four-row designs. With single-row bearings, the thrust load capacity is about 60% of the radial capacity. Double-row bea

  • Tapered Roller Bearings

    Superfinished (honed) for long life Crowned profiles optimize stress distribution "Aircraft quality" 52100 bearing steel All sizes 34 inch to 4 feet!

    Shuster Corp.

    | More...

  • Stud Type Track Roller Bearings

    RBC Aerospace Bearings offers Mil Spec standards and many specialty and custom stud type airframe track rollers to the aerospace industry and all major OEM specifications. RBC stud type airframe track rollers conform to SAE-AS39901, formerly MIL-B-3990. These bearings have been designed for specific use on track type or cam-controlled equipment when cantilever mounting is desired. They are corrosion protected, grease

  • Heavy Duty Needle Roller Bearing

    RBC produces an extensive heavy duty needle roller bearing product line from 1 inch outer ring diameter to 12 ¼ inch outer ring diameter. RBC has the capability to manufacture special designs up to a 39 inch outer diameter. The RBC SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The

  • Tapered Roller Bearings

    EBC offers a complete range of the most popular tapered roller bearings cups and cones. Additional sizes are available for production orders with qualified lead times.

    Ebc Bearings

    | More...

  • Stud Type Track Roller Bearings

    RBC Aerospace Bearings offers Mil Spec standards and many specialty and custom stud type airframe track rollers to the aerospace industry and all major OEM specifications. RBC stud type airframe track rollers conform to SAE-AS39901, formerly MIL-B-3990. These bearings have been designed for specific use on track type or cam-controlled equipment when cantilever mounting is desired. They are corrosion protected, grease

  • Cylindrical Roller Bearings

    Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by ground ribs on either the inner or outer ring. The cylindrical shape allows the inner ring to have axial movement relative to the outer ring. This is especially important when accommodating thermal expansion, where both rings must be press-fitted. PREMIUM BR

  • Standard Tapered Roller Thrust Bearings

    ART Metals Group has been designing and manufacturing quality engineered thrust bearings. We provide quality and economical thrust bearings solutions for the automotive, truck, trailer, RV, agricultural, industrial, appliance, mining and solar energy industries. We also take custom applications from idea through prototype to production runs. Our ability to manufacture tapered roller thrust bearings from concept, thro

    Art Metals Group

    | More...

  • Engine Ball Roller Bearings

    RBC Aerospace Bearings offers standard and many specialty and custom designed radial ball bearings to the aerospace industry and all major OEMs. RBC’s radial ball bearings are offered in Conrad-type, full compliment, sealed and unsealed designs. These bearings are offered in ABEC 1 through ABEC 7 precision grades, pre-loaded, corrosion protected, grease-lubricated, and are available with numerous separator, ball, s

  • Drum Roller Bearings

    When you have found what you are looking for or need assistance, please contact Cindy Bilski or Ty Hogue via email or give them a call at 414-529-0240 to place an order or to have your questions answered. We appreciate your business! JA2107 Spherical Roller Bearing 1-716″ BOX SIZE: 12 x 5 x 8 in DIAMETER: 1-716" BOLT FLANGE: 2" WEIGHT EA.: 17 lbs. LIST PRICE: $209.00

  • Track Roller Bearing

    Track Roller Bearing Plastic Outer .75" outside diameter, .30" width Durable celcon black plastic (a close equivalent to Delron) 2 Ball Bearing Chromium steel Stud Threaded shaft Nickel plated steel Hex socket at center of stud 3 millimeter hex socket, .17" deep Thread M4 X .7 metric Load Capacity 40 lbs Made in USA RoHS Compliant Custom plastic outer, stud, guide wheel, and threaded shaft designs can be quoted upon

  • Mounted Tapered Roller Bearings

    Mounted Tapered Roller Bearing assemblies consist of sealed and lubricated inch or metric tapered bearings with setscrew locking collars. This are contained within a variety of housings types, mounting styles, and housing materials.

  • Cylindrical Roller Bearings

    Cylindrical Roller Bearings have exceptional load capacity and are mostly used for freefloat side bearings. They operate at high speeds. Due to the configuration they are considered separate bearings. The different types of cylindrical roller bearings are as follows: NU, NJ, NUP, N SERIES INFORMATION: NU400 Series – NUP400 – NU1904 – NU2504 – NJ1002 – NJ2004 – NU2004 – NUP2004 – NU3004 Series – A-52

    Abx Distributing

    | More...

  • Crossed Roller Bearings

    HIWIN Corporation Crossed Roller Bearings consist of an outer ring, an inner ring, and a plurality of rollers and spacers. The roller lies between the inner and outer ring with the spacers placed between the rollers to prevent the mutual friction between them thereby decreasing the torque resistance for rotation. There are six types of Hiwin Crossed Roller Bearings comprising of, the split outer ring type (CRBA), the

    Hiwin Corporation

    | More...

  • Cylindrical Roller Bearings For Aerospace Application

    Engineered for life-critical commercial and military aircraft applications, our cylindrical roller bearings are manufactured to RBEC 5 tolerances in sizes ranging from 0.8661 in. to 11.024 in. O.D. Standard features and options include: nine different ring configurations; rings and rollers made from either SAE 52100 or M-50; machined, one-piece, metallic roller cages; and rollers of equal length and diameter (rectang

  • Needle Roller Bearings

    Our shell-type needle bearings feature caged design that offer 3X the speed of uncaged designs. The needles inside the bearing allows for high speed, high load, low profile bearing design. QBC's roller clutches are ideal for indexing, backstopping and overrunning applications. These lightweight, low profile clutches can operate at a high indexing frequency of up to 4 CPS.

  • Roller Bearing

    Metalloy Tooling is a proud stocking distributor of rotainers and ball cages from several proven brands. With many high quality precision products our goal is to provide quality products that will keep your tool room running smoothly. Chose many brands including: Agathon Lempco Danly Lamina MDL Fibro Several products are in stock and many can ship same day! With several different materials available Metalloy Tooling

    Metalloy Tooling

    | More...