Dies in USA

YOU ARE IN : USA / Tools & Equipment / Molds And Dies / Dies

Related Category

View 102 Products below

  • High Pressure Wiper Dies

    • Material : round tubing
    • tube diameters : 875

    Bend Tooling's industry-leading inserted wiper die is our most popular product. Over the past twenty years we have perfected the design and manufacture of our inserted wiper line, and no one else comes close to our quality, price, and speed of delivery. We also manufacture traditional "aircraft-quality" square-back solid-body wiper dies plus we have a resharpening service for these tools (including those made by our More...

    Bend Tooling

    | More...

  • Grommet Dies

    • Grommet size : 00
    • Hole diameter when set (in) : 3/16

    3 pc. set. These grommet dies work with our W-1 Hand Press or W-3 Pneumatic machines. Various sizes are available from 316” up to 2”. Instructions enclosed.

  • Large Hose Crimper Die

    • Weight Lb : 0.4800

    Part Number 861-23 Hose OD 2332" (18.3mm) Optional PkgBox Qty 1 Weight Lb 0.4800 Use with 860 large hose crimper

  • Tooling Cutting Dies

    • temperature range, : -350° to +1000° F (-188° to +538° C)

    Dynacron can be applied to all PVD and CVD coatings in addition to all Ferrous and non-ferrous substrates. The extremely low coefficient of friction improves chip evacuation on cutting tooling and significantly reduces galling, material adhesion and residual pickup. Dynacron has been used successfully on end mills, saw blades and drill bits. It is also an excellent addition to chucks, tooling holders and die componen More...

    Dynacron Llc

    | More...

  • Custom Molds Plastic Die

    • Materials : We handle all tool and die materials including, but certainly not limited to: CR/HR Steel A2, S7, M2, H13, D2 4130, 4340 Tool Steels 300, 302, 304, 316, 15-4, 17-4 Stainless Steels CPM-110 and all Powder Metal (PM) Carbides Inconels

    Industrial Tool and Die Inc. specializes in close tolerance, complex, durable, and high-yield custom molds for plastic, rubber, and die cast component manufacturing. We create precise tools for repeatable high, medium, and low volume production runs. Our skilled toolmakers can meet any print specification. Our cutting edge automated CNC machining centers and innovative tool designers yield high quality molds and prov More...

  • Dies

    • Threads per Inch : 26
    • shank diameter : 1/4

    The 'split die' is most commonly used and the solid die is particular to pipe threads. Die Nuts are extremely useful on vehicle maintenance, as they can be used with wrenches or socket sets in very confined spaces. More...

  • Post your Buy Requirement

  • Form Dies

    DACO can design and build “bending and forming” tools, usually considered a secondary operation where a flat blank or part is placed into the tool and formed and bent with one or more operation or single press cycle, Usually lower volume parts will be formed and produced from secondary bending and forming tools. BendForm Dies are used to bend, form, or draw the material or part into a variety of angles and shapes

  • Pullmax Shrinking Dies

    Pullmax Shrinking Dies (2 piece set). Made of billet S-7 tool steel, heat-treated. Ready to use. Special shanks available.

    Cook Enterprises

    Stillwater | More...

  • Embossing Dies

    Embossing is the process of placing a flat part in between a male and female embossing die set. Once the part is pressed by the male and female dies, the image or characters are raised above the level part, similar to the numbers on a credit card. Sharpen your dull, worn-out dies to add value and save costs in your stamping procedure Directly upload your exact vector artwork into our machines to ensure your die is EX

  • Hts-4040-u H Tap Removal Die

    The Huskie HTS-4040-U is an H-tap removal die that fits “U” type die compression heads including: SL-C510, REC-6510, EP-510HC, EP-510C & REC-3510 style compression heads. The HTS-4040-U aids in clean removal of H-taps from #6 SOL to 40 ACSR.

    Proline Tools

    | More...

  • Tool And Dies

    Our tooling capabilities include temporaries, compounds, progressives and in-house hard tooling. We have over 900 standard tools for our CNC turret press and many other special forms. Visit our tooling library page for a list of available tools or contact us for more information.

    Quality Tool

    | More...

  • Swaging Dies

    We make our swaging dies from a tool steel specifically designed for this application which is heat treated to withstand repeated use on aluminum, copper, steel and stainless fittings. Dies can be made for any standard mil spec as well as non mil spec application and we specialize in custom dies. We can supply dies for our machines or machines from other OEM's. We can make dies for any machine and for any fitting (at

    Swage Co, Llc

    | More...

  • Catheter Tipping Dies

    107,250/Piece(s)

    We achieve a high degree of polish on even the smallest (less than 2Fr) ID tip forming surfaces with excellent release properties. And by electroforming dies with a low but uniform wall thickness (down to .005�), we can significantly shorten heating and cooling cycles and increase throughput. Complex configurations including balloon ends, multiple lumen dies, calibrated through-holes and integrated ele

    Nicoform Inc.

    ROCHESTER | More...

  • Dies

    Dies are used to cut or clean an external thread. They can be used by hand or on live spindles and are made of High Speed Steel.

  • Punches And Dies

    With 43 years of industry experience, we have the expertise and technical knowhow to custom engineer all shapes and sizes of tablet compression tooling to your exact specifications. Simple or complex, you can depend on Natoli to produce superior quality, long-lasting punches and dies made from the highest grade steel in the industry.

    Natoli

    | More...

  • Post your Buy Requirement

  • Edm Die

    EDM Tooling is an addition to EDM machining. We maintain a grinding department and EDM machining job shop with vertical machining center to increase our capabilities and expand the range of EDM parts which we product cost effectively. EXPERT EXPERIENCE IN TOOL & DIE OF EDM PARTS While we make significant investments in equipment, our employees are our most valuable asset. Our Tool & Die Makers and machinists are amon

    Wire Cut Co., Inc.

    | More...

  • Stamping Dies

    Stamping Dies are the lifeblood of almost every traditional Tool & Die shop across the US. Since 1968, our Tool & Die Division has been designing and building all different types of dies, such as: High Speed Blanking Progressive Powder Metal Overton Industries specializes in dies of many different sizes. We design and build many high speed stamping dies that are 18” square. These dies are ground to a precision tole

    Overton Industries

    | More...

  • Dies

    Kromhard Twist Drill Co. offers you Round & Square dies, as well as Hexagon rethreading dies of high speed steel and carbon steel, including special thread and metric dies, NPT, NPS, NPTF, NPSF pipe dies, left hand dies, and a variety of tap and die sets. For size and ordering information call us toll free (866) 863-3344 to get the dies you need now.

  • Dies

    Ferrules, sleeves and sockets require individual press dies depending on material and dimension. TALURIT manufactures standard & special dies to cater all possible swaging demands. Dies are fabricated in different block sizes to fit our various swagers. The smallest swager use block size A and the largest swager use L. The dies are mounted in the die holder of the swager. Smaller block sizes than standard can be fitt

  • Tap & Dies

    Acme, NPT, NPS, NF, NC, NPTF, NEF, NPSI, Interrupted, Tandem, Pulley, Nut, Acorn Die, Extension, Trapezoidal, Special, Standard, Aircraft, Special Pitch, Automotive, Extended Lengths, STI, Electrical, Machine, Whitworth, Bottom, Plug, Taper, Hexagon Rethreading, Metric, NPS, Taper Pipe Tap, Form, Roll Form, 2 Piece Die, Die Chaser, Die Heads, Adjustable, Round, Square, Carbon, Dryseal, Marine

  • Dies

    Olympic Tool and Die designs high-quality custom tools, dies, jigs and fixtures as well as custom machinery that allows you to produce more efficiently. We manufacture high-precision products and deliver on time. You can rely on our dedication to quality and precision to deliver creatively designed, thoroughly tested solutions for all tool and die needs. With a full array of CNC Machining Centers, lathes, grinders, a

    Olympic Tool & Die

    | More...

  • Steel Rule Dies

    Our founder, Frank Jacobson, started building steel rule dies shortly after serving in World War II. Today we continue to offer the same service and quality that Frank insisted on over 60 years ago. Steel Rule Dies are used in die cutting a range of sheet and roll materials including paper, plastic, cardboard, rubber, foam and numerous others. Steel Rule Dies can be made to cut nearly any shape, as a matter of fact;

  • Custom Steel Rule Dies

    Sipe Steel Rule Die, Inc. is a premier source for custom fabricated steel rule dies. CAD technology combined with automated rule bending equipment, enables us to rapidly create dies from small and simple, to large and complex within very precise ±.005" tolerances. Our quality standards ensure each of our dies is accurate, strong, and sharp for a long operational life. We are able to create dies measuring up to 8' (L

  • Dies

    Whether you need Forge Dies, Trim Dies or even Form Inserts, EWT3DCNC can design, build or repair your job. We will help you get your product to the market faster at a lower cost with the quality you demand. We can take your job from start to finish making your job easier.

    Ewt/3dcnc Inc.

    | More...

  • Wire Drawing Dies

    Carbide and diamond dies produce wire diameters from .187" to .005" (4.75mm to .127mm). The ability to draw wire enables us to provide the optimal size filler metal for incorporation into your assemblies. You do not need to waste money and material by brazing with stock sizes of material that may be too large for your assembly. Drawing also yields round, square, half round, rectangular or unusual cross sections.

  • Brass Extrusion Dies

    We use our advanced ceramic materials to make high performance hot extrusion dies for use in copper and brass forming. Dies are available as inserts only or ready-inserted into steel housings. We also offer sintered blanks. Our dies are made using Nilcra™ Zirconia, a tough monolithic ceramic material that maintains strength and hardness even at high temperatures, so it is highly resistant to wear, deformation, gall

  • Punches, Dies, Blades

    We are offering punches, dies, blades. Punches, dieas and blades as well as other parts for ironworkers and cnc's such as piranha, geka, scotchman, peddinghaus, ficep and others.

  • Box Dies

    Southland Container houses custom manufactured dies onsite in our central warehouse. This allows us to provide custom designed box and container solutions for any client, including custom designed box inserts, custom printing, and packaging materials. If you have contents that need a unique box design, contact our offices for a free consultation

  • Industrial Dies

    Deals in Industrial Dies

    Z Tech

    | More...

  • Fin Die

    Deals in Auto Radiator, automotive heat transfer, aluminum fins, air conditioner fins, Heat Transfer, Precision Machining, roll die systems, tool sharpening services, fin design, Tube Heat Exchanger, fin mill, metal forming dies, fin machinery, auto heat exchanger, fin press, aluminum dies, radiator fin, metal forming dies tooling, metal dies, production fin mill

  • Dies

    Deals in Pearls, crystal pens, rhinestone balls, puffed heart pendants, Clasps, Novelties, Dies, fancy stones, crystal applicator tool, lockets, Beads, Buckles, Chains, Pendants, findings, round stones, Jewelry, Picture Frames

    Merchants Overseas

    | More...

  • Steel Rule Dies

    Deals in meter brokering, Washers, Standard, aeromotive gaskets, Gaskets, Seals, custom, Plastic Closures, Steel Rule Dies, Hydraulic Seals, O Rings