Enclosures in USA

YOU ARE IN : USA / Electronics & Electrical / Electrical Part And Components / Enclosures
Explore by Products


View 311 Products below

  • Compact Enclosures Ae

    Price : Get Quote

    • Model No. : AE 1030.500
    • Depth : 120 mm (4.7 ˝)
    • Width : 380 mm (15 ˝
    • Height : 300 mm (12 ˝)

    Housing with door of sheet steel, spray-finished with mounting plate and flange (gland) plate in the base. Protection category up to IP 66. more...

    Rittal Corporation

    Urbana, Oh 43078 | More...

  • Waterproof Enclosure

    Price : Get Quote

    • Volume : approx. 550 cm³
    • Material : High impact ABS
    • Dimensions : 108x83x63 mm
    • IP Rating : 65

    With an IP65 rating, this enclosure will protect your Phidgets from the elements. With proper installation of the foam rubber sealing ring, even the heaviest of rainstorms won't get through. All that is needed to assemble is a Phillips screwdriver. This small project box keeps yo more...

    Phidgets, Inc

    Calgary, Ab T2h2h9 Map | More...

  • Fsjbs Small Line Series Fiberglass Enclosures

    Price : Get Quote

    • Series : FSJBS

    FSJ Small Line Enclosures offer a lightweight, compact, solution for applications requiring confined spaces. The series houses everything from terminal blocks to small positional control. Available in a choice of two body styles, these enclosures are made of fiberglass-reinforced more...

    Camiex

    12003 Windy Rock Way | More...

  • Aluminum Enclosure

    Price : Get Quote

    • Color : Clear Anodized
    • Height : 4.882
    • Width : 4.882

    Excellent shielding characteristics built into the standard design Models include: Basic extrusion with end panels Incorporates attractive front bezel Panel mount - bezel ready to mount in larger panel Case extrusion is available in smooth and ribbed exterior, and Anodized and Bl more...

    Buckeye Shapeform

    Columbus, Oh 43207 Map | More...

  • Post your Requirement

  • Heat Pump Enclosure

    Price : Get Quote

    • Material Finish : Powder Coated BMP # 110 Blue and # 19 Black Texture
    • Dimensions : Length: 18.00″ Width: 16.00″ Height; 15.00″

    Today more than ever, efficient use of energy is very important. The heat pump shown here was designed to pre-heat hot water by extracting heat from ambient air and thereby reducing the amount of energy required to bring it up to temperature typically required for residential use more...

    Bull Metal Products, Inc.

    Middletown, Ct 06457 Map | More...

  • Metal Acoustical Enclosures

    Price : Get Quote

    • Cloth Lining Materials : Fiberglass Mylar Polyethylene

    This product works in a variety of application including personnel enclosures, equipment enclosures or walls around noisy equipment. We offer this product in both steel and aluminum and can do custom metal if required. Our standard finish for our enclosure is a RAL powder coat fi more...

    Noise Control Systems

    Covington, La 70433 Map | More...

  • Camera Enclosure Boh-1411

    Price : Get Quote

    • Series : BOH-1411

    Carcasa con grado de protección IP66 contra meteorología adversa Aplicación de recubrimiento FEVE que mejora la protección contra UV y ácido Carcasa con un índice IK10 a prueba de vándalos LED infrarrojos integrados para visualización nocturna hasta 50 m Compatibilidad de more...

    level one

    2934 1/2 Beverly Glen Cir Suite322 | More...

  • Stahlin Pc606cc

    Price : Get Quote

    • Dimensions : 6'' x 6'' x 5''

    PolyStar™ Enclosures are intended to be utilized for outdoor and indoor applications. The polycarbonate resin in the PolyStar™ Series received the best rating, an “F1” per UL 746C. This means that the resin has passed tests for UV exposure and water immersion. The PolySta more...

    BgB Supply

    Omaha, Ne 68127 Map | More...

  • Pressurized Enclosures

    Price : Get Quote

    • Enclosure : NEMA 4 or better
    • Materials : Fiberglass Painted Steel

    Providing equipment and services for purge and pressurized enclosures, motors, and systems, Industrial Products extends our top-quality hazardous and explosive environment service offerings to customers from all industries. Specializing in NEMA 4 or better-rated enclosures, we pr more...

    Industrial Products Corporation

    Louisville, Ky 40207 Map | More...

  • Post your Requirement

  • Hdt Base-x 505 Ultra-light Maintenance Enclosure

    Price : Get Quote

    • Model : 505 Ulme

    The HDT Base-X 505 Ultra-Light Maintenance Enclosure (ULME) is a lightweight vehicle maintenance shelter providing enough space for the storage or maintenance of virtually all C-130 transportable vehicles. The end-panel removes easily for larger vehicles. Fast, light and mobile, more...

    HDT Global

    Solon, Oh 44139 | More...

  • Display Module Enclosure

    Price : Get Quote

    • dimensions : 7.5" L x 7.5" W x 7.1"
    • Model : SSE3
    • Item : 416-0387

    SSE3 SMARTSONIC Display Module Control Enclosure, wall-mounted, 3" slots to insert control bargraph moddules that read SMARTSONIC Transmitters. Transparent polycarbonate cover, 7.5" L x 7.5" W x 7.1" Dia, NEMA 4X (for use with SSCM-7 and SSCM-8 SMARTSONIC Level Transmitters). Spe more...

    Airmatic Inc.

    Malvern, Pa 19355-3981 Map | More...

  • Handheld Enclosures

    Price : Get Quote

    • Body-Case : 2.17"x1.81"x0.67"
    • Minitec : 2.01"x1.26"x0.51" - 3.31"2.09"x0.75"

    The manufacture of advanced and ergonomic handheld enclosures has been the major focus of our program for many years. Today, we offer an exceptional variety of sizes and styles to suit both indoor and outdoor electronic devices. OKW handheld enclosures have an aesthetic and timel more...

    OKW Enclosures, Inc.

    Bridgeville, Pa 15017 Map | More...

  • Enclosures

    Price : Get Quote

    • Category : Control

    Whether your application calls for an industrial steel electrical enclosure, a stainless steel enclosure, or a non-metallic Fiberglass Reinforced Polyester enclosure, ISE Controls can provide exactly what you want. We can select a standard off the shelf solution or a total custom more...

    ISE Controls

    Indianapolis, In 46220 Map | More...

  • Turbine Enclosure

    Price : Get Quote

    • Series : LM2500

    Equipment enclosures are an essential element to an overall quiet system. LoTec designs equipment that ranges from tight fitting, skid based enclosures to large buildings that go around the equipment and are free standing to grade. Their construction can vary from the acoustical more...

    LoTec, Inc.

    Coppell, Tx 75019 Map | More...

  • Datacom Splice Enclosure

    Price : Get Quote

    • Dimensions : 8.75
    • Weight : 47 oz.
    • Connectors : Nylon with neoprene gland

    The Norland Datacom Splice Enclosure PN21300 is designed for the maximum protection of up to 6 fiber optic splices. For larger fiber cable, the Norland Datacom Splice Enclosure PN 21310 is equipped to hold up to 18 splices. These compact, durable splice enclosures are ideal for d more...

    Norland Products, Inc.

    Cranbury, Nj 08512 Map | More...

  • Nema 12 Mild Steel Wall Mount Enclosure

    Price : Get Quote

    • Part : 36603

    14 gauge mild steel with continuously welded seams Heavy Duty continuous hinge with removable hinge pin Padlocking hasp and staple Print pocket Wall mounting tabs 12 gauge sub panel INCLUDED in price Ground studs included inside cabinet and on door ASA 61 Gray powder coat finish more...

    Thermal Devices

    Mount Airy, Md 21771-0560 | More...

  • Radar Mounting Enclosure

    Price : Get Quote

    • DIMENSIONS : 13" x 12"

    Radar Mounting Enclosure The enclosure is approximately 58" long, with internal dimensions of approximately 13" x 12". The pod is primarly designed for use in airborne radar applications, but can be modified for other purposes. The pod has three hardpoint attaches to allow the po more...

    Zivko Aeronautics, Inc.

    Guthrie, Ok 73044 Map | More...

  • Networking Enclosure

    Price : Get Quote

    • Length : 33.560”
    • Weight : 24.505 lbs.
    • Width : 10.81"
    • Height : 6.940”

    A manufacturer of computer networking equipment needed a custom built enclosure that would be rack mountable as well as lockable. The interior of the unit called for pullout shelf. Our engineers set to work creating a design to meet these features, ultimately producing a cost eff more...

    SFI, Inc.

    Orlando, Fl 32807 Map | More...

  • Round Enclosures

    Price : Get Quote

    • O.D. Outside Diameter : 1.000 in
    • H Outside Depth : 2.000 in
    • Material Thickness (Gauge) : 0.018 in

    Round Enclosures larger image Round, Square & Rectangle boxes are produced from deep draw tooling created by Omega Tool, that ensures consistency. Available in any height to maximum dimensions shown. Deeper, cans available with a tool service charge. Standard enclosure tolerances more...

    R. P. Luce & Co., Inc.

    Northport, Ny 11768 Map | More...

  • Acoustical Enclosures

    Price : Get Quote

    • heights : 12 ft.
    • temperatures : 160° F.

    TMI's Absorber and Barrier Curtain Systems are very economical alternatives to rigid acoustical panel and permanent wall systems. These systems are offered in two distinct styles: the Barrier Backed Configuration (BBC) and the Barrier Septum Configuration (BSC). Composite systems more...

    TMI, LLC

    Pittsburgh, Pa 15205 Map | More...

  • Videolarm Outdoor Enclosures

    Price : Get Quote

    • Height : 6.75
    • Width : 5.25
    • Length : 13.75

    A wide variety of outdoor housings are available including: Enclosures designed to meet IP65 standard, Bullet resistant housingst, Pressurized housings, Optional sunshield, Heater and blowers for all environments. ACH13ACH8 Aluminum Outdoor Housing Designed to meet IP65 standard more...

    Kintronics

    Ossining, Ny 10562 Map | More...

  • Dusttrak Environmental Enclosure

    Price : Get Quote

    • Dimensions (H x W x D) : 2 x 43 x 48 in. (5 x 109 x 122 cm)
    • Weight : 34 lb (15.3 kg)
    • Power Supply Voltage : 5–12 V

    The DustTrak™ II and DRX Aerosol Monitor Models 8530, 8530EP, 8533 and 8533EP are portable, battery-operated, laser-photometers that measure and record airborne dust concentrations. The DustTrak Aerosol Monitors have a custom-designed, weatherproof Environmental Enclosure Model more...

    Aj Abrams Company Inc.

    Sharon, Ma 02067 | More...

  • Enclosures

    Price : Get Quote

    • Flame Spread (Max) : 25 (ASTM E-84)
    • Thickness : 0.375" minimum with local reinforcement as required
    • Flex Modulus (Min) : 1,100,000 psi (ASTM D-790)

    Enclosures: Custom EnclosuresComposites USA enclosures are designed and manufactured for rugged industrial use where part weight and contact with corrosive chemicals or sea water might be a concern. Although designed for industrial environments, these enclosures also receive the more...

    Composites USA

    North East, Md 21901 Map | More...

  • Tsi Dusttrak Environmental Enclosure

    Price : Get Quote

    • Series : TSI DustTrak 8520-1

    The Environmental Enclosure can be used in conjunction with the DustTrak 8520 for many different applications. While its primary use is outdoor applications, the enclosure and extended-life battery may also be advantageous in indoor industrial applications to provide additional s more...

    Argus-Hazco

    Chesterfield, Mi 48047 | More...

  • Fabrication Of Custom Electrical Enclosures

    Price : Get Quote

    • Standards Met : Customer supplied print, CAD drawings
    • Delivery/Turnaround Time : 2 to 3 Weeks
    • Volume : 100 and Up
    • Delivery Location : Midwest Region (F.O.B. Skol Mfg.)
    • Product Description : Electrical enclosures

    Our capabilities allow for forming and punching of different styles of housings for electric and electronic uses. These parts were produced from customer supplied CAD drawings to their exact specifications. The parts were turret punched and press brake formed, sometimes with spot more...

    Skol Manufacturing Co.

    Chicago, Il 60640 Map | More...

  • Electronic Aluminum Enclosures

    Price : Get Quote

    At Richardson Metals, Inc., we have been providing high quality aluminum extrusions since 1980. Our in-house custom extrusion manufacturing capabilities were exemplified when a customer in the electronics industry required our services for custom enclosures. We used our extrusion more...

    Richardson Metals, Inc.

    Colorado Springs, Co 80915 Map | More...

Post your Requirement