High Precision Ball Bearing in USA

YOU ARE IN : USA / Industrial Supplies / Bearings And Bearing Components / High Precision Ball Bearing

View 720 Products below

  • Pobco Heavy Duty Abec-1 Precision Roll End Bearings

    • Suitable For : 1-1/2" Sch. 40 Pipe
    • Bore : 7/16 Hex
    • Length : 1.13
    • POBCO Part# : HDTP24P4007CS
    • FD : 1.87

    Black Thermoplastic Housings (conductive polypropylene) with precision chrome shielded bearing offer higher load and higher speed capabilities and quiet operation. More...

    Pobco Plastics

    | More...

  • Angular Contact Ball Bearings

    • degree : 15, 25, 30 and 40

    The NSK range of angular contact ball bearings has been designed to meet the increasingly demanding requirements of original equipment manufacturers. These bearings have a contact angle so that they can sustain significant axial loads in one direction together with radial loads. Furthermore, since an axial component is generated when a radial load is applied, these bearings are generally used in pairs, triplex sets, More...

    Baldwin Supply Co.

    | More...

  • Instrument Ball Bearing

    • W Fraction : 1/16"
    • Bore Fraction : 3/32"
    • Bore : 0.0937
    • OD Fraction : 3/16"

    Rainbow Precision Products has a large selection of miniature bearings and instrument series ball bearings with many types available. Precision tolerances from ABEC-1 through ABEC-9 are generally available for most miniature applications. Bore sizes of miniature ball bearings start at 1 mm with an outside diameter of 3 mm More...

  • Fag Shielded Radial Ball Bearing

    • Quantity : 1

    Item: Radial Ball Bearing Bearing Type: Shielded Bore Dia.: 10mm Bore Tolerance: +0-.007mm Outside Dia.: 30mm Outside Dia. Tolerance: +0-11 micron Width: 9mm ABEC Tolerance: 1 Dynamic Load Capacity: 1, 220 lb. Static Load Capacity: 530 lb. Max. RPM: 34, 000 Temp. Range: -40 Degrees to 212 Degrees F. Bearing Material: Steel Cage Material: Pressed Steel Shield Material: Stamped Steel Lubrication: MT47 Grease Industry N More...

  • Post your Buy Requirement

  • Ball Thrust Bearings

    • Thickness (in.) - C : .448 - .458
    • Model No. : H-19B

    At ART Technologies, our focus is on the customer. We provide rapid, effective and highly competitive solutions for your Thrust Bearing needs. ART Technologies offers an extensive line of high quality ball bearings for your applications. Our bearings are manufactured in the USA at our facility in Hamilton, OH. We ship these bearings to seven different countries maintaining competitve pricing. More...

    Art Metals Group

    | More...

  • Swivel Shackle Slotted Head Pin Ball Bearing

    • Categories : Stainless Steel Rigging, Swivel Shackles.

    SKU: RF75. Categories: Stainless Steel Rigging, Swivel Shackles. A : 7.9 mm B : 17.0 mm C : 60.0 mm D : 15.8 mm P.L. B.L. : 2100 kg U.D.L. B.L. : 2300 kg Shackle Pin Product No. : - Weight : 80 g

  • Angular Contact Ball Bearings

    • Standard Designs : 6000 Series Deep Grouve Ball Series - including self-aligning inner race 7000 Series Angular Contact - single and matched pair Type QJ Four-Point Contact

    Radial & Angular Contact Ball Bearings ERIKS has a unique blend of application experience in ball bearing applications that span the use of heavy-duty applications such as power transmission to the employment of precision class angular contact ball bearings in optics-gimbal assemblies. The design and integration of bearings into the use of motor and geartrain is also a core competency of ours. Let us help you with yo More...

  • Ball Bearings

    • Sizes : 1-15/16 inches (49 mm)

    Ball Bearings Request Information Our ball bearings are backed by more than 70 years of manufacturing and technical expertise, and we offer the widest range of duty and performance options, along with many housing, seal and mounting choices. With a legacy of performance and quality, Link-Belt ball bearings are trusted leaders when you need a ball bearing that will lend uptime, quality and performance to your applicat More...

  • Thrust Ball Bearing

    • Size range: : 228.6 mm to 1371.6 mm

    Type TVL-Angular Contact Thrust Ball Bearing Type TVL thrust ball bearings provide exceptionally low friction, cool running and quiet operation at high speeds and also are less sensitive to misalignment. We designed TVLs for thrust loading, but it will also accommodate some radial loading. Size range: 228.6 mm to 1371.6 mm (9 in. to 54 in.) Design Attributes: Precision ground and lapped steel balls are enclosed by ha More...

    Timken Drives Llc

    | More...

  • Precision Ball Bearings

    Precision Ball Bearings A precision ball bearing is chosen in an environment where the bearing can not be routinely lubricated or there may be environmental debris. The precision ball bearing offers easy rolling motion and bearing protection. Two per wheel are used.

    Bond Casters

    | More...

  • Precision Metric Ball Bearings

    Nordex has a large inventory of Miniature Precision Ball Bearings available in Metric and Inch Sizes. 400 Series stainless steel and chrome steel bearings are available in ABEC 1, 3, 5 and 7. Standard sizes available from stock – 1, 5mm to 12mm internal diameter with an outer diameter of 5mm to 28mm (Please inquire for unlisted sizes)

    Nordex, Inc.

    | More...

  • Precision Metal Ball Bearings

    Friction, or resistance to motion, is the result of the force acting between two surfaces as they slide against each other. Bearings reduce friction and provide smooth sliding contact between surfaces due to their material, shape or lubrication. Choosing the correct bearing for an application improves efficiency, extends bearing life at high speeds and avoids overheating. Bearings fall into two general categories: ra

  • Genii Semi-precision Bearings

    Inspired by precise European designs, FRANTZ proudly brings you GenII® with a special quality core bearing and IronGrip carbon steel housing that provides the performance of a machined semi-precision bearing at far lower cost.

  • High Speed Bearings

    PACAMOR KUBAR BEARINGS (PKB) ultra high speed bearings are found in many challenging applications. For high speed bearing applications, bearing noise, vibration, and life are all important factors which are heavily affected by both the bearing design and the intricate details of the bearing production process. Stainless steel (440C) precision miniature & instrument ball bearings for ultra high speed applications are

  • High Temperature Linear Bearings

    The SBI ... H Series High Temperature Linear Guides provide high load capacity and precision guidance like the SBI Series but are modified for high temperature environments. The Aluminum end caps enable all metal construction. Suitable for temperatures up to 180 °C (356 °F). Industry standard sizes 15 to 65 Load capacities from 4.5kN to 320kN (1000lbs to 72000lbs) Rail lengths to 4000mm with splicing available for

  • Deep Groove Radial Ball Bearings

    Radial ball bearings are able to accommodate low to heavy radial loads and low to moderate thrust loads in either direction. They are available with metal shields (ZZ) or rubber seals (2RS). Several tolerance grades (Abec 1-9), internal clearance (C2 to C4) and cage designs are available to best suit the running precision and speed of the application.

    Action Bearing

    | More...

  • Engine Ball Roller Bearings

    RBC Aerospace Bearings offers standard and many specialty and custom designed radial ball bearings to the aerospace industry and all major OEMs. RBC’s radial ball bearings are offered in Conrad-type, full compliment, sealed and unsealed designs. These bearings are offered in ABEC 1 through ABEC 7 precision grades, pre-loaded, corrosion protected, grease-lubricated, and are available with numerous separator, ball, s

  • Post your Buy Requirement

  • Deep Groove Ball Bearings

    They are available in a variety of sizes, and are the most popular of all rolling bearings. This type of bearing supports radial and a certain degree of axial load in both directions simultaneously The shielded or sealed deep groove ball bearings simplify the sealing structure of applications and are designed for use with a rotating inner ring. Greasing will not be necessary as these bearings are pre-lubricated.

  • Nice Ball Bearings

    In 1902, William Nice founded one of the first "anti-friction" bearing manufacturing plants. Starting with unground ball types and developing into the ground field, RBC NICE® today produces a complete line of precision ground, semi-ground, and unground bearings and bearing assemblies.

  • Large Ball Bearing

    large diameter precision ball bearings are engineered to perform in life-critical commercial and military aircraft applications. The line includes radial, angular contact, gothic arch, and fractured race construction types in sizes up to 11.024 in. O.D. Our customized solutions feature elements that satisfy a multitude of mounting and operating requirements. Options include special alloys, case hardened rings, extend

    Nhbb

    | More...

  • Ball Bearings

    Available in a variety of standard and custom inch and metric sizes, our thin section bearings offer high performance in corrosive and non-corrosive environments where space devoted to bearings is at a minimum.

  • E Series Thrust Ball Bearing

    They are used in a variety of medium duty axial load applications. These include pumps, valves, machine spindles, rotary tables, and drilling heads to name a few. ADVANTAGES Inch ABMA standard sizes dimensionally interchangeable with Aetna F series Banded design offers contamination protection Full ball complement for high durability Grooved hardened, precision raceways Single direction

  • Self Aligning Ball Bearings

    Self-aligning ball bearings have a spherical outer ring raceway, the center of whose curvature meats that of the bearing itself, so that the inner ring, ball and cage continue to rotate, aligning themselves if they have become misaligned within design limits. This type of bearing is suitable when the displacement of the centers around which the shaft and housing rotate and shaft deflection are likely to occur. Someti

  • Ball Bearings

    Bearings Limited offers a wide variety of radial and angular contact ball bearings, as well as linear motion bearings and a complete line of spherical plain bearings (ball bushings). Popular bearing sizes are available in both premium and secondary brands, giving distributors multiple options for filling their customers' needs – all with a single purchase order.

    Bearings Limited

    | More...

  • Butt Hinge Ss Ball Bearing

    Austral fire specialise in the supply and installation of fire safety packages to any structure whether being new or refurbished. Our qualified and experienced team of tradesmen have certifications in the supply, installation and maintenance of any fire protection package within australia.

    Austral Fire

    Longboat Key | More...

  • Airframe Control Balls Bearing

    RBC offers a full line of airframe control ball and roller anti-friction bearings to the aerospace industry. RBC airframe control bearings conform to SAE-AS7949 (formerly MIL-B-7949) and all major OEM specifications. These bearings are of lightweight design, corrosion protected, grease-lubricated, and typically sealed. Airframe control bearing rings and balls are made of hardened bearing alloy, AISI 52100, with all e

  • Shuster Ball Bearings Highest Quality Standards

    SHUSTER BALL BEARINGS ~ HIGHEST QUALITY STANDARDS Rely on Shuster for value-added bearing solutions, including a full line of Radial Ball Bearings. Shuster delivers outstanding quality at a competitive price, providing you with exceptional value no matter what the application. All Shuster radial ball bearings are produced from high quality, through hardened bearing steel with super finished raceways. Automatic assemb

    Shuster Corp.

    | More...

  • Thin Section Ball Bearings

    RBC Aerospace Bearings offers a full line of standard and many specialty and custom designed thin section ball bearings to the aerospace industry and all major OEMs. RBC’s thin section ball bearings are offered in radial contact, angular contact, 4-point contact and sealed radial contact designs. These bearings are offered in ABEC 1 through ABEC7 precision grades, pre-loaded, corrosion protected, grease-lubricated,

  • Ball Bearings

    With more than ninety years of manufacturing expertise in ball bearings, NTN offers one of the industry’s widest arrays of products to fit your application. ball bearings are available to you off-the-shelf, in sizes ranging from 10 mm to 320 mm outside diameters. And with a virtually limitless variety of configurations of seals, shields, lubricants, internal clearances, and cage designs, there’s no reason to go a

  • Ball Bearing

    For the smoothest and quietest operating drawers take a look at Custom Service Hardware’s selection of ball bearing slides. These slides ride on ball bearings that provide smooth and quiet operation. They also typically have a release that allows for easy drawer removal, which makes for easy cleaning and repair.