Hot Press Lamination Machine in USA

YOU ARE IN : USA / Packaging & Paper / Lamination / Hot Press Lamination Machine

View 90 Products below

  • Lamination System

    • Dimensions : 23 x 35 x 25
    • Material Width : 25in. (63.5cm)
    • Material Length : 100ft (30.5m)

    XM2500 25in Lamination System The Xyron® XM2500 is a cold (pressure sensitive) laminator that offers three solutions in one easy-to-use package. It applies laminate, adhesive or both to documents up to 25" wide. The aggressive adhesive, coupled with high pressure rollers, improves both transfer and bonding quality. The process requires no heat, eliminating smells, messes, and warm-up time. The Xyron® 2500 is perfec More...

    Xyron Inc.

    Scottsdale, Az 85258 Map | More...

  • Laminator

    • Packaging size : 1

    Ideal for frequent large office use and equipped with a host of intelligent features and intuitive controls, the Fusion 5000L A3 Laminator guarantees super fast, perfect results. Stylish and compact, it is ready to use in one minute and laminates a single document up to A3 size in under 20 seconds using standard 2x75 to heavyweight 2x250 micron pouches. More...

    Lasertype

    San Diego, CA | More...

  • Laminator

    • Grade : Commerical
    • Width : 25
    • Power Requirement : 110v

    • Preset lamination pressure and speed means easier to use and eliminates potential sources of problems. • Enclosed laminating and pull rollers helps avoid jams and wrap arounds. Rollers are interchangeable. • Forced air cooling allows laminating with 3 and 5 mil films as well as the 1.5 mil film often used by schools. This system eliminates wripples sometimes associated with thicker films. • Fixed-position l More...

    National Laminating, Inc.

    165 Amaral Street | More...

  • Roofon Automatic Hot-air Welding Machine

    • Item Number : 5230051
    • Frequency (Hz) : 50/60
    • Voltage : 120

    Our smallest automatic hot-air welding machine for welding of all thermoplastic roof material. Tried and tested, robust technology Continuous Speed, temperature and airflow adjustment through potentiometer Easy to install center wheel conversion kit for outer perimeter and parapet wall top welding Great for parapets, flashing, and seam overlap 40mm weld width Automated drive High welding speed Lightweight, powerful, More...

    Hapco Inc.

    Baraboo | More...

  • Post your Buy Requirement

  • Bulk Hot Melt Glue Systems

    • Operating Temperature : Variable
    • Max Output : 12 lb/hr
    • Model No. : Fisnar HM12

    Model HM12 is a single hose output system designed for low to medium volume dispensing up to 20, 000 cps. Analog controls provide temperature settings of tank, hose, applicator valve, motor speed and functions. A recessed adjustment selects a choic of up to seven temperature ranges for tank, hose, and appicator valve. More...

    The Glue Factory

    Germantown, Wi 53022 Map | More...

  • Hot Oil Systems

    • temperatures : Four (4) design
    • Volts : 208 thru 575 Volts, 3 phase

    THE SL series of heat transfer systems are designed for closed loop temperature control of high temperature heat transfer fluids. These completely packaged systems are designed for a maximum operating temperature of 550°F (SL550), 600°F (SL600), 650°F (SL650) or 750°F (SL750). All welded construction Closed cell insulation Drip proof base PID temperature controller High limit device with manual reset Expansion ta More...

    Heat Exchange & Transfer, Inc.

    Carnegie, Pa 15106-3446 Map | More...

  • Graco Invisipac Hm50 Tankless Bulk Hot Melt System

    • Melt Rate : 50lbs Per Hour
    • Channels : Up to 6
    • Temperature Range : 100-400F
    • Glue Shape : Pellets
    • Maximum Gun Wattage Per Channel : 400W

    The Graco InvisiPac HM50 is the ultimate in bulk hot melt dispensing. With a 50lb per hour melt rate, the HM50 can keep up with even the most demanding applications. The InvisiPac HM50 offers cutting edge tools allowing users to calculate their 'true adhesive cost' and virtually eliminates clogging due to char with its patented melt-on-demand system. As if reduced down time and more efficient dispensing weren't enoug More...

    Hotmelt.com

    Edina, Mn 55439 Map | More...

  • Hot Melt Systems

    • Series : 970

    The newly updated 970 Series THERMOPULSE Units are high performance, trouble free, industrial quality hot melt application systems, with features not previously available except at much higher cost. Compact and ruggedly constructed, an adjustable pressure pulsation free pump, supplies molten adhesive to either a handgun applicator, or one of several types of ELECTROMATIC automatic applicator heads. Sophisticated elec More...

    Spraymation, Inc.

    Fort Lauderdale, Fl 33309 Map | More...

  • Press Automation Systems

    • Dimensions : (72” x 60,000 lbs. x 0.135”)

    rjm-pas-cut-to-length-2rjm-pas-cut-to-length-3rjm-pas-cut-to-length-4rjm-pas-cut-to-length-1 rjm-pas-cut-to-length-2rjm-pas-cut-to-length-3rjm-pas-cut-to-length-4rjm-pas-cut-to-length-1 PRESS AUTOMATION SYSTEMS CUT-TO-LENGTH LINE (72” x 60, 000 lbs. x 0.135”) Specifications P.A.S – CUT TO LENGTH & SLITTING LINE – 480 AMPS – 3 PHASE COIL CART P.A.S. – Coil Cart – 50, 000# capacity UN-COILER P.A.S. – Un More...

    Ray Jacobs Machinery Co.

    Farmington Hills, Mi 48334 Map | More...

  • Hydraulic Lab Press Equipment

    • OVERALL DIMENSIONS : 31”T X 18”W X 20”D

    PEBSCO ITEM #196 USED HYDRAULIC PRESS 20 TON BY PRECO MD# PA7-1 220V603 ELECTRICS (2)- 9” X 12” ELECTRIC HEAT – WATER COOLED PLATENS PIG TAIL STYLE PLUG 220V 8” DAYLIGHT OVERALL DIMENSIONS: 31”T X 18”W X 20”D TABLE MOUNT HAND PUMP PRESSURE GAUGE & ONOFF LIGHTS OVERALL VERY GOOD CONDITION More...

    Polymer Equipment Buying Selling Co. -..

    Fairlawn, Oh 44334 Map | More...

  • Krupp Model Ep-07 Cont.screw Press For Oil Extraction

    • Type : SCREW PRESS
    • Voltage : 460 VOLTS/60HERTZ/3 PHASE
    • Condition : VERY GOOD, CLEANED SANDBLASTED, PRIMED AND PAINTED
    • After-sales Service Provided : AVAILABLE ON REQUEST
    • Production Capacity : 30-35TPD IN fULL PRESS, 75-85TPD ON EXTRUDED SOY BEANS
    • Certification : USED PARTIALLY REBUILT
    • Brand Name : KRUPP

    used and partially rebuilt krupp continuous veg. Oil screw press in excellent condition complete with screw feeder, main drive and 150hp motor 3/60/460 volts More...

    R&d Equipment Company

    4760 Freeman Drive Fort Worth, Texas 76140 | More...

  • Jumbo Baling Press Machine

    Customers can provide their specifications to us in regards to the packaging of the products as we serve customized packaging requirements. We ensure damage-free products at customer's end. Our team members make it possible to conduct online transactions, keeping the details confidential. Our transactions are completely crystal clear and thus, you can trust us. Fabricated Body with Quality plates. Bale is thrown out

    Angel Export Import Usa

    Texas | More...

    http://www.angelexportimportusa.com/jumbo-baling-press-machine.htm

  • Laminator

    Lamination is the process of sealing a document (id card, letter, certificate, photograph, poster) or fabric between two layers of plastic film (one layer for single sided lamination). An extended version of laminating called "over laminating", is the process of mounting a laminated item to a "substrate" (stiff foam board, wood or metal backing) overlaid with laminating film.Roll laminators and Pouch laminators use h

    Machine Advantage

    Freeport, Ny 11520 Map | More...

  • Post your Buy Requirement

  • Hot Box Heated Dispensing Systems

    The "HOT BOX" System from EXACT solves the problems associated with the meter mix dispensing of heated resins. This family of products has been developed to provide temperature consistency and control year round with a simple trouble free approach. Standard Features: Heated cart to fully enclose the fluid components "Custom" fixed mix ratios anywhere from 1:1 through 10:1 Feed tanks "on board" in the heated chamber (

    Exact Dispensing Systems

    Newcastle, Me 04553 Map | More...

  • Hot Melt Adhesive Dispensing Systems

    Nordson® ProBlue® 4 Liter 240V, up to 2 hose; Piston pump 8lb Hose Hot Melt Unit, Reconditioned to Like-New Condition. We offer rebuild of your melter, exchange of like melter for your old melter and buy out right, when available. Unit comes with warranty. 230V, RTD sensor controlled unit. Price is a base price. If there are any broken or missing parts on the exchange or your melter for rebuild, additional charges

    Keystone Industries

    Winder, Ga 30680 Map | More...

  • Hot Upset Machines

    Hot upset riveting is a permanent part assembly process that combines electrical current with pressure and time to compress and expand a boss or rivet to a desired diameter and shape. Generally, hot upset riveting is applied when there are special circumstances such as hardened materials being formed, a requirement to accomplish maximum hole fill, or when it is critical to provide resistance to vibration related fati

    Orbitform

    1600 Executive Dr., Jackson, Mi 49203 | More...

  • Standing Leg Calf Press Machine

    We are offering standing leg calf press machine. Standing calf machine toughen part:soleus、gastrocnemius; specification:l1100*w730*h1830mm

  • Press Control System

    Our Press Control System can operate large and small superplastic forming presses and precisely meters the flow rate of gas into and out of the forming die. The system was designed to control superplastic forming (SPF) and diffusion bonding (DB) of titanium and has been used for the production of engine and fuselage parts on the newest generation of passenger aircraft. With coarse and fine controls, this system is id

    The Pilot Group

    Monrovia, Ca 91016 Map | More...

  • Press Controls System

    (click on thumbnail to enlarge) Robust controls and strong safety systems are absolute necessities for any world class stamping cell. Excellent control systems can increase uptime and production speeds, reduce costs from die crashes, monitor part quality and provide mistake proofing for the entire production system. Comprehensive safety devices protect both personnel and assets. With our technology partner Link Syste

    Tcr Inc.

    Wisconsin Rapids, Wi 54494 Map | More...

  • Loop Press Series Machine

    Machine to consolidate straight parts of bars, loops or coils. The BPP was initially designed by BARTECH International, the Canadian subsidiary of Vincent Industrie, well known for its high quality taping, pressing and looping equipment and recognized in the industry since more than 20 years. The « BPP series » is designed to press-consolidate bars, loops or one leg of pre-impregnated formed coils. It consists of 1

    Vincent Industries

    Brooklyn | More...

  • C-frame Press Machines

    Bendco Machine & Tool will provide high quality C-Frame press machines to support your most demanding production requirements. Our company will perform complete engineering and fabrication of this type of machine, which is used in the automotive and other high volume industries. Bendco Machine & Tool will design and fabricate a machine to your specifications. Power Sources: AirOil, Hydraulic, Pneumatic and Servo Tona

    Bendco Machine & Tool, Inc.

    Minster, Oh 45865 Map | More...

  • Digital Printing Press Machine

    The company is a prominent Importer, Exporter and Supplier of Digital Printing Press Machines in Seminole. The Digital Printing Press Machines are a UV Type digital label printing machine which adopts the most advanced piezo drop-on-demand (DOD) inkjet printing technology. The technology of the Digital Printing Press Machines is suitable for variety of substrates, such as paper, film, metal foil and adhesive sticker.

    Uscac Sales & Development Llc

    Seminole | More...

  • Hydraulic Press System

    The press design consists of four tie bars with a top mounted hydraulic cylinder, a tie bar guided moving ram platen, a fixed bottom platen and a center carrier platen, tie bar guided, with bottom acting hydraulic cylinder providing "Oil Spring" action. A free standing hydraulic power unit using a "Servo Pump" to control pressure and flow. A Allen Bradley SLC control using platen position encoders and the servo pump

    Raloid Tool Company, Inc.

    Mechanicville, New York | More...

  • Hoop Press Machine

    Hoop Press Machine Presses hoops together for sewing embroidery 8 each Used Equipment, Sold “As Is”. See FAQProducts and Terms and Condition for Return Policy.

    Quali-t-liquidators

    305 N. 2nd Ave #114 | More...

  • Laminator

    Deals in Measuring Instrument, Mining Machinery Parts, Mining Machinery, Educational Toys, Bearing Steel, Laminator, hole punch, metal processing machinery parts, Analysis Instruments, metallurgy machine, Carbon, Minerals

    C - K Oil Gas Consultants

    cleburne | More...

  • Laminator

    Deals in Carbon, Mining Machinery, toy stocks, Belt Making Machinery, metallurgy, Minerals, Manufacturing Machinery, industrial fuel, processing machinery, Laminator, energy equipment, Crude Oil

    Coyote Energy Inc

    columbus | More...

Post your Buy Requirement