Lifts & Platforms in USA

YOU ARE IN : USA / Tools & Equipment / Material Handling Equipment / Lifts & Platforms

View 204 Products below

  • Crossover Platforms

    • COLOR : Yellow
    • WIDTH : 24
    • SIZE : 1” x 2” rectangular tubing frame

    A crossover platform allows a person to safely walk over an obstacle or hazardous area instead of having to go around or through it. Crossovers can increase productivity as well as safety by improving access to hard-to-reach areas. You can select the parts needed to create your own specially configured U-Design crossover by following the steps below. More...

    Tri-arc Ladders

    | More...

  • Genstor 1u Cloud Platform

    • Series : GS-Ca102

    FEATURES 1U rack-optimized chassis, Asus RS700DA-E6PS4 . . 2 Dual Processor Nodes with these features per node: Dual AMD® 6000 series CPUs. Up to 256GB DDR2 memory. Dual-port Gigabit Ethernet. 4x 3.5” hot-swap SATASAS bays. IPMI 2.0. 1 open PCI-E x16 slot(HL, LP). 980W high efficiency power. More...

  • Maintenance Platform

    • Model : DT-6008 Series

    The Model DT-6008 Series Self-Propelled Maintenance Platform are completely self-contained lift platforms with single or triple scissors. Designed primarily for aircraft maintenance use. It’s payload 1000kg capacity and large platform area makes it ideal for transferring oversize baggage, light freight; tool boxes and portable equipment. Equipped with floodlight, remote control panel, and safety handrails it provid More...

    Tld America

    | More...

  • Spill Containment Platforms

    • Model : 700-T1631

    For warehouses that use or store potentially hazardous liquids, TMI carries spill containment platforms that protect against spills while ensuring the containment and protection of containers carrying these liquids. TMI safety containers are the most flexible solutions for spill protection and are made of heavy-duty polyethylene, which possesses a high level of chemical resistance. All spill containment platforms fro More...

    Tmi, Llc

    | More...

  • Post your Buy Requirement

  • Smartdose Platform

    • Injectable Volume Range : 3.7mL
    • Minimum Delivery Time : 4.5 minutes

    The first combination product that incorporates the SmartDose platform was recently approved by the U.S. Food and Drug Administration (FDA). The SmartDose platform offers a wearable, subcutaneous injector with an integrated drug delivery system that incorporates human factors and usability testing to deliver a truly patient-centric approach to self-administration. More...

    Tech Group Tempe

    | More...

  • Cobra Electro-optical Platform

    • Weight : 28-32 lbs
    • Payload Capacity : 55 lb
    • Continuous Rotation : 360° x n

    The Cobra Electro-Optical Platform (EOP) is a high performance, compact dual axis, servo positioning platform, developed primarily for carrying an extensive range of optical sensors. It is also well suited for rugged ground deployment and harsh vehicle mounted situational awareness, security, and surveillance applications. More...

  • Eagle Modular Spill Platforms

    • DIMENSIONS (WXDXH) : 26.25" x 26" x 6.5"
    • DESCRIPTION : 1 Drum Modular Platform
    • MODEL NUMBER : 1633
    • DRAIN PLUG : No

    Yellow Modular Spill Containment Platforms manufactured by Eagle. Features: High performance engineered plastic construction Excellent chemical resistance and impact durability for long life Removable grating for easy cleaning Flat top grating Modular pallet easy to connect with built-in u channel 100% recyclable Compliant with EPA 40 CFR 264.175 for volumes less than listed capacity. Models 1635 & 1635D are SPCC com More...

    F.e. Bennett Co.

    | More...

  • Test Platform

    • Dimensions : 3U x 160mm

    The Type 39 E-Frame (Short), test platform supports 3U, VPX development. With a rugged aluminum construction, the versatile Type 39 E-frame is 9U overall to hold 3U cards. Available in both compact (49HP) and full (84HP) widths for mounting 3-15 slots at 1" pitch. Front accessible test points and monitoring LEDs for; +3.3V, +-5V, +-12V, +- 24V, and +- 48VDC. The Type 39 E-Frame features high performance 150cfm, fans More...

  • Stainless Steel Floor Platforms

    • Standard Platform Sizes: : 3′ x 3′ to 6′ x 6′

    he MS11 Heavy-Duty floor scales with sturdy deck and channel construction for heavy usage. The MS11 (smooth deck) and MS1 2 (checkered safety tread deck) floor scales are constructed of 304 stainless steel, equipped with stainless steel sealed load cells and a NEMA 4X stainless steel junction box. Designed to meet or exceed NIST H-44 Class III 5000d scale guidelines. More...

  • Locomotive Engine Personnel Lifting Platform

    • Type: : Carrier
    • Dimensions: : 190" × 56"
    • Capacity: : 4,000 lbs.

    Handling Specialty designed and manufactured six (6) personnel lifts for an international locomotive engine manufacturer in the USA. The lifts are operated in pairs (with the engine in the center) and allow technicians to safely and ergonomically position themselves during the assembly process. In addition to the lift raising up and down, the platform is also equipped with five (5) sliding extensions that allow techn More...

  • Packet Optical Transport Platform

    • Product Code : BTI7000

    BTI7000 Series packet optical transport platforms deliver massively scalable, carrier-grade networking to metro service networks. You can easily deploy these systems across mobile backhaul, Ethernet business services, and broadband residential applications, as you need to aggregate more and more traffic at the services edge. More...


    | More...

  • Axis Workstation Platform

    • Unit of Measure : EA
    • Series : 800 Series

    The 800 Series Axis™ Workstation Platform is intended for medium- to high-traffic dry environment applications. Workers who have to bend or reach to perform their jobs are at a higher risk for muscle fatigue and lower back pain. Providing a work platform—when needed—allows for a comfortable, safe and effective work environment. Axis™ workstation platforms are the simple, lightweight solution to fit the job to More...


    | More...

  • Aerial Work Platforms

    • Sizes : 4 ft x 8 ft standard man basket size

    AERIAL WORK PLATFORMS 2, 000 lbs carrying capacity Ideal for lifting 2 people and their tools 4 ft x 8 ft standard man basket size Inside working width of 50″ Foldable railings for easy transport Product Description Also referred to as man baskets, aerial work platforms are designed to lift personnel and tools into hard to reach areas. Designed in both fork mounted and quick attach styles these platforms easily pin More...

    Lift Parts Express

    | More...

  • Forklift Work Platforms

    • Width : 48"
    • Length: : 40"
    • Capacity : 1,000 lb
    • Wt.: : 270 lb
    • Height : : 45

    Safely lift your maintenance or warehouse personnel with the forkliftable work platform. Includes safety chains that attach from the platform to the folk lift mast, required 42 inch hand rails, a slip resistant tread plate deck, 3 inch kick plates around the perimeter to eliminate items being pushed off the deck for safety below. The 42 inch high removable side rails with a mesh back, protects workers from the chains More...

    Basco, Inc.

    | More...

  • Platforms

    • Grating Thickness : 1.5" unless otherwise specified
    • Flex Strength : 30,000 psi (ASTM D-790)
    • Resin : Polyester or Vinyl Ester Resin as required by corrosion resistance

    Platforms: Fiberglass PlatformsFiberglass platforms may be designed and manufactured to fit any number of geometry, strength and corrosion requirements. The reactor platform in the picture was specially designed to ship in three sections, the ladder, the lower 72" of platform framing, and the upper 36", allowing all sections to be moved by fork lift through doors and hallways to its final assembly point. Factory pre- More...

    Composites Usa

    | More...

  • Post your Buy Requirement

  • Power Drive Scissor Lifts

    • Product No. : DLX-DL10
    • Lowered Hgt : 29 IN
    • Platform Size : 28 X 46
    • Foot Print : 30 X 46
    • Max Plat Hgt : 10 FT

    Same concept as the Manual Push Scissor Lift - But with power drive Available in THREE sizes 12, 19, AND 26 foot platform heights Roll Out Cantilever option allows for above item access Optional Safety Sensing system warns people as they come into a danger zone - better than always beeping Includes self locking gates Can be safely driven when fully raised Includes emergency lowering system to prevent catastrophic dro More...

  • Fwd Power Chair Lift

    • Series : AL585SS FWD Power Chair Lift
    • Hitch Height (Range) : 5" - 18"
    • Aluminum Deck Size : 27.5" x 39"
    • Lifting Capacity : 350 lbs. (160 kg) Upgradable to 400 lbs.

    Designed specifically for your front wheel drive power chair. (Passenger's side entry only) Drive on, drive off platform Platform folds automatically when not in use Lightweight design: only 76 lbs installed Keyed, one switch operation Requires no chair modifications Manual crank backup Padded hold–down arm safely and automatically holds chair More...


    | More...

  • Universal Lift

    • Capacity : 2,000 lbs.
    • Model : UL-2000

    Hydraulic system is equipped with a pressure relief valve to prevent overloading Remote control availalbe so operator can control safely from various locations Safety belly-button switch and a horn to alert others if necessary promotes safety Quality-Crafted Equipment. . . Unit is designed, engineered and built out of heavy duty steel weldments offering years of trouble free operation Lifting phase is hydraulically a More...

  • Dubl Kote Finger Lift

    • adhesive +carrier mil. : 36
    • liner width : 3/4
    • liner mil : 3
    • lenght : 600
    • adhesive width : 1/2

    Double-sided foam tape with a permanent rubber based adhesive, available in long rolls for automatic or hand application. Dubl Kote is ideal for filling spaces and conformable for bonding to many different types of surfaces. More...

    Duraco Inc.

    | More...

  • V-13-a Forklift Service Lift

    • Series : V-13-A

    V-13-A Forklift Service Lift The Lift-A-Lift service lift, model V-13-A, is designed to allow complete access to the underside parts of forklifts, industrial trucks and motor vehicles for lubrication, repair, or part replacement. Just drive the vehicle onto the 16 inch wide runways. The self-leveling lift raises the vehicle up to 71 inches so all maintenance can be performed while standing. The Lift-A-Lift service li More...

    Tilt-or-lift, Inc.

    | More...

  • S.r. Smith Multi-lift

    • Part Number : 575-1105

    Between March 15, 2011 and March 15, 2012, over 100, 000 commercial swimming pools will be required to make their pools accessible to people with disabilities. The multiLift is our most versatile pool lift yet, with the option to install it as a fixed or removable lift. The Wheel-A-Way™ option provides flexibility to remove the lift for poolside events or seasonal storage. Right or left side mounting means less to More...

    Nexus Distributing Inc

    Miami | More...

  • Hydraulic Machine Lifts

    • Oil Capacity(cm3) : 224,525
    • Weight(kg) : 26,45
    • Series : SOH-Series

    Enerpac hydraulic machine lifts are designed for lifting heavy equipment with minimum available access Remote hydraulic pump enhances safety Low height lifting toe Precision guided to reduce friction and isolate cylinder from side-loads Two extendable support feet provide extra stability Includes RC-Series DUO Cylinder with CR-400 coupler. More...

  • Portable Motion Trek Bp 300 Deluxe Pool Lift

    • SKU: : 165600-DLX Categories

    Certified ADA Compliant by NSF International • Moveable and easy to operate • 300 pound lifting capacity • Six points of contact with the deck for maximum safety and stability • Fully sealed counter weight case maximizes corrosion protection and prevents rust build up on concrete or tiled deck • Removable handle for safety and storage • Small footprint when compared to the competition • Ships in managea More...

    Spectrum Products

    | More...

  • Ground Dock Lifts

    • Series : 1000 Series

    All models are equipped with a hinged bridge equipped with a pull back chain. All models have an approach ramp, wheel chock. All of the electrical controllers are Underwriters Laboratories approved assemblies. Each unit is washed with phosphoric acid, fully primed and then finished with baked enamel. All cylinders are machine grade with clear plastic return lines. All pressure hoses are double wire braid with JIC fit More...

  • Dock Lift

    • model : Model S

    In the event you find the cost of forming a concrete pitpad expensive, an economical solution is a LoMaster S Series Semi-Portable Dock Lift. The unit is installed at the dock face and mounted on locating cradles and wear plates. With its extremely low profile, the LoMaster S Series provides added versatility for ground level loading or unloading operations. The same high quality construction features found in the st More...

  • Rough Terrain Scissor Lifts

    • SJ7127 RT : 8,690 lbs (3,942 kg)
    • SJ7135 RT : 9,120 lbs (4,137 kg)
    • model : SJ7135 RT

    Skyjack’s Rough Terrain Scissor Lifts combine solid and powerful design elements to meet the demands of any job site environment. All models are equipped with Skyjack’s unique axle based 4WD system which features a “Detroit Locker” type rear differential and limited slip front differential for unmatched terrainability. Working heights for these two models are 33’ (SJ7127) and 41’ (SJ7135), while capacitie More...

    Ellwood city | More...

  • Autoquip Material Handling Pallet Lift

    • Category : Material Handling
    • Dimension : OAD: 56"L x 48"W x 12"H

    56"L x 48"W air lift platform with a 4, 000 lb capacity. Features rotary platform, a 12" minimum height, and 24" vertical travel.

    Frain Industries

    | More...

  • Industrial Platform Lifts

    • Straddle lift : Self diagnostic control system on all multi level units
    • 4 Post mechanical lift : Lifting heights up to 150 feet
    • Cantilever type lift : Lift capacity from 100 to 30000lbs

    Advanced Equipment is an authorized Wildeck dealer based in Capitol Heights Maryland. We service the entire USA. Vertical reciprocating conveyors (VRC’S) are a cost effective, safe and efficient way to move materials from one elevation to another. These vertical lifts come in two different classifications depending on your application: More...

  • Counterbalance Vertical Lift

    • 10-CBW- : 1,000 lbs.
    • Mode : Capacity

    Ruger’s Manual Counterbalance Vertical Lift is designed with a reverse base that allows for easier access to loads than traditional straddle leg style floor cranes. This heavy-duty floor crane style can handle all loads with ease and safety. More...

  • Drivable Mini-scissor Lifts

    • Product No. : HDMSL-26
    • Description : Drivable
    • Platform Lowered Height : 48"
    • Platform Max Height : 26'
    • Working Height : 32'

    500 lb. Capacity. DC Powered. Drivable Lifts include a roll-out cantilevered platform. MeetsExceeds ANSI Safety Requirements. Power Unit stored in a lockable slide out drawer. The Push-able Mini-Scissor Lifts are ideal for stores and stock rooms. Provides the stability and reliability of a scissor lift in a compact size that fits almost anywhere. The slim base makes it a must for tight aisle ways and reduced access a More...

  • Stainless Steel Lab-lift

    • Material : Aluminum/Stainless Steel
    • Plate Area : 10 x 10 in.
    • Package Dimension : 12.25 L x 10.38 W x 3.75 in. H
    • Weight : 3 lb.
    • Package Weight : 7 lb.

    Lab-lift, 3.5 to 13 in. Height, AluminumStainless Steel, 10 x 10 in. Plate Area, Maximum Load 186 lb. (84.37kg), Ideal for use in Fume Hoods or Bench Tops and Hold a Variety of Items such as Glassware, Hotplates and Magnetic Stirrers Aluminum Lab-lifts provide stable height adjustment for various items in the lab such as flasks, baths, and small equipment. Top and bottom decks are constructed of anodized Aluminum. In More...

    Burrell Scientific

    | More...

  • Ergoflex Ma

    • MA80 : 175
    • MA75SE : 165
    • TYPE : max load (ibs)

    Ergolift opens up many new opportunities for fast, convenient and safe handling of moderate loads. It relieves the operator of strenuous operations, such as gripping, lifting, holding and turning an object, and it does this quickly and with high precision. When fitted with suitable lifting tools, the Ergolift is a versatile and economical aid that provides the perfect solutions to many handling problems. The Ergolift More...

    Ergoflex Inc.

    | More...

  • 5-axis Grinding Platform: 5-300 Mm Optics

    OptiPro's eSX 300 is an enhanced version of the eSX 150 optical machining center. It also has 5 controllable axes: X, Y, Z, B & C with up to 5 axes of simultaneous movement. The powerful Fagor 8070 CNC with user-friendly set up and run programs make the eSX 300 an excellent choice for prototype to production manufacturing of precision optics up to 300 mm.

    Optipro Systems

    | More...

  • Patient Positioning Platform

    The ISCS with the proprietary Patient Positioning Platform, is intended as the perfect medical treatment device to compliment large open room hospitals and spinal therapy clinics where dedicated space is not an issue. The technology supporting our flagship product complements a patient specific treatment plan and is very advanced. Our medical devices are intended to apply distraction forces to spinal structures in a