Plain Bearing in USA

YOU ARE IN : USA / Industrial Supplies / Bearings And Bearing Components / Plain Bearing

View 65 Products below

  • Radial Spherical Plain Bearings

    • sizes : 12.7mm to 600mm

    This series of plain bearings is similar to the SF and FS types, but also includes lip seals that are retained in the outer ring and withstand high grease pressures during lubrication. These lip seals assure full distribution of the lubricant to all bearing surfaces and protect against internal contamination. While all of our plain bearings are precision ground and made from through-hardened steel, custom orders are More...

    Timken Drives Llc

    Fulton, Il 61252 Map | More...

  • Closed Inch Plain Linear Bearing

    • Model Number : LBCA series
    • Works With : SS shafting
    • Type : Standard All Steel

    Standard All Steel Infomation: The LBCA series is an all steel, closed style, Inch series recirculating round rail linear bearing. These bearings are used in lower load applications where self alignment is not required. The all steel construction allows for smooth operation in high temperature applications. These bearings are typically used with the Lintech SS series precision linear shafts. Recirculating Linear Roun More...

    Lintech

    Monrovia, Ca 91016 Map | More...

  • Plain Sleeve Bearings

    • OD : 3.004/3.006
    • Length : 3-1/2
    • ID : 2.262/2.264
    • Housing ID : 2.998/3 000
    • Shaft Size : 2-1/4

    For General Purpose Self-lubricating Applications up to 350°F Operating Temperature (Dry or Submerged) Metcar 1010 Babbitt is an especially formulated self-lubricating bearing material low in friction, corrosion resistant, extremely durable and can be used for both dry and submerged application. The sizes listed are normally available from stock and have been sized to provide long bearing life under normal load and More...

    Metallized Carbon Corp.

    Ossining, Ny 10562 Map | More...

  • Sealmaster Spherical Plain Bearings

    • Bore Size Range : 3⁄16" - 2"

    Sealmaster spherical plain bearings perform a similar function as rod end bearings and must be supported in housing.Sealmaster spherical plain bearings are designed with a variety of outer race materials. These include steel, heat-treated steel, bronze, stainless steel, and heat-treated stainless steel. These are designed for flexibility in a wide variety of application requirements. More...

    Baldwin Supply Co.

    Fargo, Nd 58102 | More...

  • Plain Bearings

    • cast bronze lengths : 13
    • oilite bar stock lengths : 6 ½

    Plain bearings are a category that includes rod ends, spherical bushings, and other friction products. It also includes bushings from various materials like bronze, oilite, graphite, PTFE, nylon, and many others. We also stock a large range of oilite and cast bronze bushings. We also have bar stock in cast bronze 13” lengths and oilite bar stock in 6 ½” lengths. You can find more information about our bronze off More...

    Akron Bearing Co., Inc.

    Akron, Oh 44306 Map | More...

  • Spherical Plain Bearings

    Rod ends and spherical plain bearings are designed to support a load. This combination also accommodates angular motion, misalignment and oscillation in mechanical motions systems.

    Bradford Industrial Supply

    Oklahoma City, Ok 73105 Map | More...

  • Spherical Plain Bearings

    RBC Aerospace Bearings offers a full line of Mil Spec standards and many specialty and custom spherical plain bearings to the aerospace industry and all major OEM specifications. Both metal-to-metal and self-lubricating bearings are available. Configurations include swaged construction, load leader slot, split ball and high misalignment designs, with high temperature and light weight titanium and aluminum series offe

    Industrial Tectonics Bearing

    Rancho Dominguez, Ca 90221 Map | More...

  • Drill Chucks Jacobs Plain Bearing Drill Chucks

    drill chucks - Industrial Chucks - Jacobs Chucks Bisco of Florida, Inc - Special Internet Pricing Available industrial drill chucks are sold by Bisco of Florida, Inc., a highly respected distributor of Drill Chucks. The keyed chuck is an integral part of all drill chuck technology, applied to a wide range of applications, from the most sophisticated CNC machining to drilling with the smallest cordless portable power

    Bisco Of Florida

    Fort Pierce, Fl 34982 Map | More...

  • Post your Buy Requirement

  • Spherical Plain Bearings

    Welcome to RBC's on-line Engineering Data Guide for Spherical Plain Bearings. RBC has been a pioneer in spherical bearing technology since inventing the fractured outer race design over 40 years ago. Since that time, RBC has continued to introduce industry leading innovations such as high misalignment, angular contact, extended inner ring, tapered bore, case carburized, and enhanced lubrication groove spherical beari

    Heim Ball Bearings Co.

    Fairfield, Ct 06824 Map | More...

  • Rod End Plain Bearings

    RBC Aerospace Bearings offers a full line of Mil-Spec standard and many specialty and custom designed plain rod ends to the aerospace industry and all major OEMs. These bearing assemblies incorporate a spherical bearing swaged into the rod end body or a loader slot design. Plain rod end bearings are available in high misalignment, high temperature, and light weight titanium series with external or internal threads, o

    Rbc Bearings, Transport Dynamics Div.

    Santa Ana, Ca 92704 Map | More...

  • Spherical Plain Bearings

    Spherical Plain Bearings ERIKS offers high quality product from state-of-the-art facilities for Spherical Plain Bearings. Computer-controlled machining and metal treatment processing facilities assure product that is size consistent and metallurgically sound. Applications include cylinder rod ends, chassis rod ties, lifting and crane equipment.

    Eriks Seals And Plastics, Inc.

    Fort Worth, Tx 76155 Map | More...

  • Spherical Plain Bearings

    EBC offers a complete range of spherical plain bearings. Our product range includes inch and metric sizes. Most sizes are available in open and sealed configurations. Select the catalog page below to view, print and save the PDF page.

    Ebc Bearings

    Dallas, Tx 75247 Map | More...

  • Fiberglass Reinforced Plain Bearings

    High load capacity Excellent shock and misalignment resistance Excellent contamination resistance Very good friction and wear properties Good chemical resistance Very good dry wear performance GAR-MAX® bearing sizes available according to DIN ISO 4379 for the replacement of traditional greased bronze bearings

    Ggb Bearing Technology

    Thorofare, Nj 08086 Map | More...

  • Rod End Plain Bearings

    RBC Aerospace Bearings offers a full line of Mil-Spec standard and many specialty and custom designed plain rod ends to the aerospace industry and all major OEMs. These bearing assemblies incorporate a spherical bearing swaged into the rod end body or a loader slot design. Plain rod end bearings are available in high misalignment, high temperature, and light weight titanium series with external or internal threads, o

    Roller Bearing Company, Inc.

    Oxford, Ct 06478 | More...

  • Plain Bearings

    Plain, flanged, and spherical Bronze, Steel, POM, PTFE Metric and inch sizes cat-plain-bearings Popular sizes in stick Available with bronze or steel cage C3 clearance provided as standard

    Shuster Corp.

    New Bedford, Ma 02741 Map | More...

  • Post your Buy Requirement

  • Plain Bearing

    PLAIN BEARING This term when applied to Bond casters and refers to machined bored wheels running directly on the axle. An economical practice for seldom moved loads.

    Bond Casters

    Manheim, Pa 17545 Map | More...

Related Products

Spherical Plain Bearings

Post your Buy Requirement