Supreme Supply Co.

United States

• Specifications: Thickness0.080 in. nominal
• Unit Weight0.5 lbs./sq. ft.

Product Description: TED PAD is a low cost, light weight damping pad with an aggressive self-adhesive surface. When applied to vibrating metal surfaces it can significantly reduce the vibrations and thereby reduce the airborne noise. Reduced vibration can also reduce failure due to structural fatigue. Ted Pad has been found to have a combined loss factor of 0.13 on 0.050? thick aluminum at 600 Hertz at 60°F. The pressure sensitive adhesive surface of TED PAD is specifically tailored for industrial use. It is resistant to mild acid and alkali and most common organic solvents especially diesel fuel and gasoline. The adhesive surface should be applied to a clean (free of oil, grease, dust or dirt) surface at a temperature of 60°F to 90°F and pressed firmly in place. Once set, the adhesive will serve at temperatures up to 200°F. Applications: TED PAD can be applied to a wide variety of products to make them more quiet and thereby more acceptable in a noise sensitive world. Some examples are car doors and other body panels, trucks, buses, tractors, construction equipments, compressors, mining equipments, ducts, bins, hoppers, machine enclosures, guards, hoods, business road cards, appliances, clothes washers, dish washers and other vibrating metal panels.

Improve separation in chemicals, oil and refinery stills. Knock out mist from air and gas scrubbers. Improve efficiency and provide high purity condensate. Essentially eliminate product loss and provide high purity condensate. Remove mist from jet exhaust. Remove condensate and oil from compressed gas. Remove contamination from compressor feed. Remove condensate and solids carryover, give clean dry steam. Knock out the plume from vent stacks. Collect soluble dusts which can then be washed from the separator by a liquid spray. Break certain dispersions and emulsions so that subsequent gravity settling will be effective. As coalescing agents to remove microscopic droplets of one immiscible liquid from another.

Permanent, self-charging electrostatic air filter. High efficiency in removing airborne particles. Self-charging as a result of air flow through the media (no expensive, troublesome power supply required). Permanent effects lasting the life of the filter. Attraction of all particles due to the presence of both plus and minus charge. Safety - No electrical hazard or performance loss due to power outage. Withstands temperature to 212 °F (100 °C) and is unaffected by humidity. TYPE CR Layers of woven polyethylene fabric collect airborne particles including pollen. Non-woven collector pad captures and retains a large amount of these particles. Reinforced by galvanized steel harware cloth. Enclosed in a rigid, rust resistant galvanized steel frame for easy servicing. Ideally suited for commercial and residential furnaces and air conditioners. TYPE HD Heavy duty industrial application features a unique 3-in-1 filter construction. Aluminum mesh intake screen prevents insects, lint and other large particles from entering the interior of the filter. Shredded polyethylene arrests troublesome fines (subvisible particles) and holds them throughout the depth of the media. A spray bonded, non-woven collector pad stops and holds airborne particles. Reinforced by galvanized steel hardware cloth. Enclosed in a rigid, rust resistant galvanized steel frame for easy servicing.

• Most efficient and durable multi-layered grease filters.Filter media is crimped expanded metal and wire screen.
• Rugged construction features an 18 gauge galvanized steel frame (Standard).Available also in stainless steel.

BAFFLE TYPE Energy efficient design prevents static pressure buildup. Permanent and cleanable. Optional bail-type filter handles. Excellent flame arrester. Tested and classified by Underwriters Laboratories, Inc. Available in stainless steel, aluminum or galvanized steel.