Suzhou TECON Construction Technology Co Ltd Suzhou

• TypeTimber Beam
• Brand Nametecon
• Colorany

With its prolonged service life and high load-bearing capacity, TECON H20 timber beam plays the key role in various girder-based formwork systems. Two ends of each beam can be sealed with protective caps to protect them from moisture, reduce damage and increase service life Yellow water proof painting Monitoring as per EN13377 standard Any length below 6.0m is available Flange is made from imported solid wood spruce or radiate pine LVL, finger-jointed into the web; Web is made from poplar core plywood with Melamine WBP glue 4.5kg/m(solid wood spruce); 5kg/m(radiate pine LVL) Residencial & commercial buildings, concrete tanks, basement, bridge piers, columns ect..

• MOQ 1 Piece(s)
• TypePlastic Boards
• Thickness3-5mm
• CertificationISO 9001:2008 Certified
• Brand Nametecon

hollow plastic shuttering is one product of tecon-form shuttering series. It is made from modified pp by polymer additives, and thus improves the hardness of the shuttering while ensuring its toughness.   highly utilized times and long service life through 10 years of appliance and market feedback, hollow plastic shuttering can be reused for more than 30-50 times based on their good maintain and using. recycled and reused whether the whole shuttering or waste shuttering, all can be 100% recycled or recycled and reduce construction waste at construction sites. compared with other formwork, the wear and tear cost is lower, the usage cost can be greatly reduced. more convenient and efficient 1.light weight, high hardness, good tenacity, no expansion, no shrinkage 2.bearable temperature:-10-70 ℃ , not deformed (within 1-2 mm) in high temperature. 3.the surface is smooth and clean, and the concrete stripping is good, easily install and remove without oil. 4.sawing, drilling and nailing are all available.