Our Products #4943498

Technodiamant supplies extremely small, precise single crystal diamond endmills and drills. Milling tools with flat tip and drilling tools with an extra facet at the tip are offered in sizes as small as 0.3mm diameter.

0.3mm cutting diameter to 0.7mm cutting diameter are available as "standard". We can hold cutting diameter to +- .010mm. Cutting edge can be parallel to centerline of shank, or offset up to 7 degrees. Parallelism held to within .02mm.

They are provided in whatever size diameter holder you would like (i.e. 18", 14", 2.5mm, 3.0mm).
These tools can be used for machining a wide range of polymers; it is extremely important to have a stable milling machine, preferably with 6 or 8 jaw collet. The higher the RPM the better; some manufacturers use 80, 000 RPM. If the system is stable, these drills can produce thousands of holes before needing to be replaced. If it is possible to freeze the plastic before machining, the resulting surface finish is beautiful.
Call us and we will fax you copies of drawings depicting the different geometries available.

Technodiamant supplies a full range of diamond dressing tools. These include single point, multi point, diaform, diamulti, and other custom made tools.
We also provide single crystal diamond dressing tools (gear dressers) for the Reishauer machines.We also offer custom manufactured reverse plated roller dressers. Our products are proven to be among the best available. We guarantee our products to meet customer provided specifications.

Technodiamant manufactures a wide range of diamond tools for diamond machining, diamond fly-cutting, and diamond turning. These tools are most often used on Precitech and Moore Nanotechnology Systems high precision turning centers. Edge radius can be either conical or cylindrical, and can be controlled to very tight tolerances, depending on radius size. Radius size can be specified from 15 microns to several hundred millimeters. Clearance angles can be specified from 7 to 30 degrees. We are routinely able to achieve waviness on 0.5 mm radius tool of

Technodiamant offers a full range of natural diamond, synthetic diamond, PCD, and CBN tools. They are available in our "Insert System" or as traditional rigid shank tools. For diamond turning carbide, aluminum, brass, electroless nickel, plastics, and crystalline materials such as CaF2, Silicon, Germanium.

These core drills are particularly suited for drilling glass, silicon and ceramic materials. It is strongly recommended that coolant be used through the center of the drill. It is sometimes possible to flood cool, but this does not effectively remove swarf and does not cool as well so it hastens tool wear.

Technodiamant is one of the largest suppliers of natural and synthetic diamond tools used in the Gravure Printing industry. The product range includes tools for the HelioKlischograph, Ohio Electronic Engraver and PCD tools for the Polishmaster and other milling machines.*Technodiamant is fully authorized by Linotype Hell Germany as a supplier of the diamond tools used on the HelioKlischograph machines.

PCD (Polycrystalline diamond) and CBN (Cubic boron nitride) tools and inserts are offered in a wide range of shapes, sizes, and grit sizes. Technodiamant is capable of creating extremely small features in these materials with our latest manufacturing equipment.

We also offer a range of free-standing CVD (chemical vapor deposition) diamond tools. We an achieve extremely tight tolerances in polycrystalline CVD, which offers a huge lifetime advantage compared to PCD for machining graphite and carbon-filled composites.

Technodiamant produces in its own laboratories high quality diamond pastes and diamond liquids.
Diamond pastes are available as water-soluble and oil soluble in different grain sizes. These products have proven to belong to the very best in the world.

Technodiamant was established in 1968 as a diamond tool manufacturer in Amsterdam. Our state of the art equipment and 70+ diamond craftsmen gives us a key advantage. In 2002 we acquired a Company in Belgium that was specialized in producing diamond gem stones. They have polished some of the largest and most valuable gemstones. This acquisition allowed us to combine our experience in holding extremely tight tolerances on diamond tools with the craftsmanship of the experienced diamond gem polishers in Belgium. The result is a team that is capable of producing extremely complex and symmetrical diamond anvils. We produce quality anvils for Universities and National Laboratories around the world. Virtually any design that you can imagine can be provided, including "custom" designs at affordable prices.

Technodiamant manufactures metalbond, resinbond, and copperresin bond wheels for the metalworking industry. Virtually all of our products are made to order, with delivery time ranging from 2-6 weeks. We manufacture diamond and CBN wheels with grit size, grit type, and binder tailored to the customers specific requirements. Some standard wheels are available with delivery ex-stock. Ceramicbond (Vitrified) wheels are also offered, with delivery time of 6-8 weeks.

For more detailed information on Concentrations, Binder Types, and Cutting Depths, please click here.

Dressing tools are also available - please inquire. Please see our web page on dressing tools, or see details that are included in our Wheel catalog.

Diamond wheels, drills and countersinks are also manufactured specifically for the glass industry. These are employed in the manufacture of carglass, mirrors, flat-glass and architectural glass products. Diamond wheels with profiles in almost any requested shape can be supplied.

One of the outstanding advantages of Technodiamant glass drills and countersinks is the fact that the body is made of stainless steel.

PCD (Polycrystalline diamond) and CBN (Cubic boron nitride) tools and inserts are offered in a wide range of shapes, sizes, and grit sizes. Technodiamant is capable of creating extremely small features in these materials with our latest manufacturing equipment.

We also offer a range of free-standing CVD (chemical vapor deposition) diamond tools. We an achieve extremely tight tolerances in polycrystalline CVD, which offers a huge lifetime advantage compared to PCD for machining graphite and carbon-filled composites.

Technodiamant supplies extremely small, precise single crystal diamond endmills and drills. Milling tools with flat tip and drilling tools with an extra facet at the tip are offered in sizes as small as 0.3mm diameter.

0.3mm cutting diameter to 0.7mm cutting diameter are available as "standard". We can hold cutting diameter to +- .010mm. Cutting edge can be parallel to centerline of shank, or offset up to 7 degrees. Parallelism held to within .02mm.

They are provided in whatever size diameter holder you would like (i.e. 18", 14", 2.5mm, 3.0mm).
These tools can be used for machining a wide range of polymers; it is extremely important to have a stable milling machine, preferably with 6 or 8 jaw collet. The higher the RPM the better; some manufacturers use 80, 000 RPM. If the system is stable, these drills can produce thousands of holes before needing to be replaced. If it is possible to freeze the plastic before machining, the resulting surface finish is beautiful.
Call us and we will fax you copies of drawings depicting the different geometries available.

Technodiamant produces in its own laboratories high quality diamond pastes and diamond liquids.
Diamond pastes are available as water-soluble and oil soluble in different grain sizes. These products have proven to belong to the very best in the world.

Technodiamant produces in its own laboratories high quality diamond pastes and diamond liquids.
Diamond pastes are available as water-soluble and oil soluble in different grain sizes. These products have proven to belong to the very best in the world.

PCD (Polycrystalline diamond) and CBN (Cubic boron nitride) tools and inserts are offered in a wide range of shapes, sizes, and grit sizes. Technodiamant is capable of creating extremely small features in these materials with our latest manufacturing equipment.

We also offer a range of free-standing CVD (chemical vapor deposition) diamond tools. We an achieve extremely tight tolerances in polycrystalline CVD, which offers a huge lifetime advantage compared to PCD for machining graphite and carbon-filled composites.

PCD (Polycrystalline diamond) and CBN (Cubic boron nitride) tools and inserts are offered in a wide range of shapes, sizes, and grit sizes. Technodiamant is capable of creating extremely small features in these materials with our latest manufacturing equipment.

We also offer a range of free-standing CVD (chemical vapor deposition) diamond tools. We an achieve extremely tight tolerances in polycrystalline CVD, which offers a huge lifetime advantage compared to PCD for machining graphite and carbon-filled composites.

Technodiamant manufactures metalbond, resinbond, and copperresin bond wheels for the metalworking industry. Virtually all of our products are made to order, with delivery time ranging from 2-6 weeks. We manufacture diamond and CBN wheels with grit size, grit type, and binder tailored to the customers specific requirements. Some standard wheels are available with delivery ex-stock. Ceramicbond (Vitrified) wheels are also offered, with delivery time of 6-8 weeks.

For more detailed information on Concentrations, Binder Types, and Cutting Depths, please click here.

Dressing tools are also available - please inquire. Please see our web page on dressing tools, or see details that are included in our Wheel catalog.

Diamond wheels, drills and countersinks are also manufactured specifically for the glass industry. These are employed in the manufacture of carglass, mirrors, flat-glass and architectural glass products. Diamond wheels with profiles in almost any requested shape can be supplied.

One of the outstanding advantages of Technodiamant glass drills and countersinks is the fact that the body is made of stainless steel.

Technodiamant manufactures metalbond, resinbond, and copperresin bond wheels for the metalworking industry. Virtually all of our products are made to order, with delivery time ranging from 2-6 weeks. We manufacture diamond and CBN wheels with grit size, grit type, and binder tailored to the customers specific requirements. Some standard wheels are available with delivery ex-stock. Ceramicbond (Vitrified) wheels are also offered, with delivery time of 6-8 weeks.

For more detailed information on Concentrations, Binder Types, and Cutting Depths, please click here.

Dressing tools are also available - please inquire. Please see our web page on dressing tools, or see details that are included in our Wheel catalog.

Diamond wheels, drills and countersinks are also manufactured specifically for the glass industry. These are employed in the manufacture of carglass, mirrors, flat-glass and architectural glass products. Diamond wheels with profiles in almost any requested shape can be supplied.

One of the outstanding advantages of Technodiamant glass drills and countersinks is the fact that the body is made of stainless steel.

Technodiamant manufactures metalbond, resinbond, and copperresin bond wheels for the metalworking industry. Virtually all of our products are made to order, with delivery time ranging from 2-6 weeks. We manufacture diamond and CBN wheels with grit size, grit type, and binder tailored to the customers specific requirements. Some standard wheels are available with delivery ex-stock. Ceramicbond (Vitrified) wheels are also offered, with delivery time of 6-8 weeks.

For more detailed information on Concentrations, Binder Types, and Cutting Depths, please click here.

Dressing tools are also available - please inquire. Please see our web page on dressing tools, or see details that are included in our Wheel catalog.

Diamond wheels, drills and countersinks are also manufactured specifically for the glass industry. These are employed in the manufacture of carglass, mirrors, flat-glass and architectural glass products. Diamond wheels with profiles in almost any requested shape can be supplied.

One of the outstanding advantages of Technodiamant glass drills and countersinks is the fact that the body is made of stainless steel.