Our Products #4841157

PRODUCT FEATURES:
Lifts bales of paper, cotton, and other materials.
Wide gripping surface for load stability.
Includes Auto-Latch mechanism for one person operation.
Complies with ASME standards.

Caldwell Triangle Beams provide a low headroom solution when a short span is all you need to make the connections between the load and the crane. Caldwell Triangle Beams are available in standard capacities from 13 to 149 tons and comply with ASME standards.




New Product - Triangle Beam
A low headroom, short span solutions connect the load and the crane to get the job done.
Product Features:
Low Headroom
Designed to ASME standards
Available Options:
Custom Capacities
Extra Spreads
Full Capacity Center Lift Points
Built-In Stand
Oblong with Top Shackle
Longer Spreads
Shorter Spreads
Various Rigging Options

PRODUCT FEATURES:
Custom designed to fit your applications.
Allows for independent and precise position of load.
Full 360 rotation @ 1-12 RPM.
Controls feature soft-starting capability.
Designed to operate on either direct or alternating
power supply.
STANDARD DESIGN FEATURES:
Heat treated forged steel hook with latch.
Forged steel sheaves with hardened rope grooves.
Tapered roller bearings with grease fittings.
Heavy duty worm gear reducer.
Direct spur gear drive.
Easy access for maintenance.
Controls include starter with overload, VFD (variable
frequency drive) NEMA - 12 enclosure and pigtail.

Adjustable Spreader

This is an adjustable spreader beam that provide a versatile soltuion for handling many different sized loads, ideal for outdoor applications.


Model 32C Adjustable Spreader Beam

PRODUCT FEATURES:
Ideal where headroom is not limited.
Adds stability to lift.Telescopic spread standard.
Available with standard chain or wire rope rigging.
Available with Adjust-A-Leg rigging for off center load adjustment (minimum lifting capacity will be approximately 10-15% of beam rating).
Wide range of additional sizes and capacities available.
Complies with ASME standards.

The Fixed Length Boom, Model FB, has a telescoping boom with a maximum horizontal reach of 12 feet. This model is available in 3, 000, 4, 000, 6, 000 and 8, 000 lb. capacities.


Standard Model FB-30 with load

PRODUCT FEATURES:
Alternate hook positions.
Handle at end for easy extension.
Telescoping boom.
Fixed or swivel hooks available.
Restraining chain with grab hook.
Boom locking t-pin.

Fixed Precision Boom

Quickly turns your fork lift into a portable crane.


Model FB-60-PLB shown

PRODUCT FEATURES:
Portable, compact and versatile lifting.
Fits standard fork lift truck.
Hook travels approximately 20'.
Adjusts both horizontally and vertically.
Restraining chain with grab hooks.
Completely self contained 12Volt DC power supply.
100 AMP Hour Battery with charger.
Easy to use toggle button control with standard 12' cord.
Hoist hook speed averages 7.5 FPM.

NEW - Hydraulic Sheet Lifter

NEW - Hydraulic drive sheet lifter provides fast and smooth leg adjustment and allows for additional force to be applied to the sides of the loads. Lifters are designed per application, simply fill out our application evaluation form and our specialists will develop the solution you need.



PRODUCT FEATURES:
Versatile handling of bundles, sheets, plates and other materials stacked horizontally.
Low headroom design for optimum lifting capabilities.
One person operation minimizes handling cost.
Hydraulic drive for smooth and fast leg adjustment allows more lateral forces applied to load sides.
Easy adjustment for different sheet widths.
Less maintenance than mechanical drives.
Broad adjustment range handles various load widths.
Complies with ASME standards.

The motorized Parallelogram Leg Drive Sheet Lifter is ideal where space between sheet stacks in storage is limited. This style lifter is designed so that the weight of the stacks of sheets or plates keeps the lifter closed. Optional motorized rotation allows the crane operator to spot the stack with precise positioning. Lifters are custom designed per application.


This 25 ton lifter was assembled and tested on-site at a facility in Indiana by our experienced team.

PRODUCT FEATURES:
Narrow aisle space design.
All pivot points equipped with hardened steel bushings and pins equipped for lubrication.
Heavy duty worm gear reducer.
Drive protect includes slip clutch.
Electrical controls include stall relay.
Designed for ease of maintenance.
AC power.

The Rig-Release Remote Releasing Hook will allow you to set loads - and then - quickly, efficiently, and safely release the rigging from a safe distance. The Rig-Release simply hooks to your crane or spreader beam. You can then attach the slings(s) directly to the Rig-Release and rig the load. Once the load line is set and the crane line is slack, pull the release rope to release the sling(s). No need for a man lift on site or to have a worker crawl out (or up) just to disconnect sling(s). It's all done from a safe distance.


Standard Model RR-1 shown


Rig-Release - Steel
Video showcasing our patented Rig-Release aiding in the installation of steel beams and columns.
More Videos
Rig-Release - Wood
PRODUCT FEATURES:
NEW- Rope Guide allows rigging to be released when hook is either above or beside the operator. If hook is located below the operator, please see Upward Pull option in the special application section.
Designed for rugged outdoor use.
Easy to use - simply rig, lift, set and release.
LOCK & CAPTURE feature engages with very little load weight (see Minimum Load in chart below).
Rated load capacity can be lifted from either Lift Arm or the lower Strip Sling Hook. Do not exceed rated capacity of hook.
Oversized bail for easy mounting on crane hook - 5, 10 & 15 ton units provided with fixed bails.
Designed and manufactured to ASME standards.

PRODUCT FEATURES:
Broad capacity range.
Low headroom design.
Painted safety red.
Complies with ASME standards.