Post Your Requirement Menu

Welcome User

Other Products / Services

We offer the best product range of Thorburn O-Seal Unions, Thorburn Retrofit Seals, CANDU Fueling Machines, Wire Reinforced Flexpipe and Met-O-Seal.

Thorburn O-Seal Unions

  • Model Model TOS -

Thorburn O-Seal Unions are recommended where piping requirements dictate the necessity of having a flat face seat to make and break the pipe line or when leaky metal-to-metal seat unions are unacceptableFeatures & Benefits:• Materials: SA105 Carbon Steel, SA182 Type 316. Option SA350LF2, Hastelloy, Inconel • ASME B31.1, B31.3 & ANSI B16.11 forged steel fittings • Never needs retightening, no maintenance Won’t vibrate loose even under extreme vibration or pressure surges • Unlimited brakeremake • Hand tight pressures to 200 bar • Flat face construction, easy slip in & out • 3000, 6000 & 9000 psi ratings available

View Complete Details

Thorburn Retrofit Seals

  • Model Model TRS

Thorburn Retrofit Seals are specifically designed to solve union leak problems caused by sealing surfaces that are pitted, scratched or rusted by changing the metal-to-metal seal to an O-Ring seal (like a hydraulic fitting). • Fits MSSPC-83, 3000 lbs (200 bar), 300lbs (20 bar), 150 lbs10 bar unions. • Retainer ring plated steel or 316SS • O-Ring material BUNA N, Fluorocarbon

View Complete Details

CANDU Fueling Machines

  • Series NS71

NS71 - Dry Break, Quick Coupling System for CANDU Fueling Machines Product Description: • Minimum Air inclusion and Fluid loss during disconnection • Easy one-hand operation, low pressure connections • Superior flow and reduced pressure drop • Standard material: 316 SS, Sizes: from 14” to 2” • Plug body made of SA564 Gr.630 Hardened Material • Simple Maintenance & Spare part availability • Special seals available for difficult media • Design pressures for 1” size 3, 000 PSI (184 BAR) • CRN ASME Section III Sub Section ND Class 3 NFH-3-4284.5 (Coupler) NFH-3-4283.5 (Plug)

View Complete Details

Wire Reinforced Flexpipe

  • Series 60TMH

60TMH Wire Reinforced Flexpipe Thorburn’s 60TMH Flexpipe is custom designed for use in piping systems that require isolation and absorption of severe noise, vibration, misalignment, lateral deflection and movements caused by mechanical or temperature changes. The 60TMH Flexpipe system replaces metal piping and is optimal for pipelines requiring resistance to electrolysis, corrosion, abrasion and water hammering. Construcon TUBE: Available with various tube compounds wall thickness with smooth or corrugated construction as determined by the application and the media. Please call Thorburn for details. REINFORCEMENT: Multiple layers of precisely angled cross woven fabric with calendared polyester or fiberglass fabric. Integrally built with an evenly spaced heavy duty helix spring wire or annular rings that withstand the rated working pressures from full vacuum to 1000 psi (70 bar). Can be designed to support a minimum bend radius from two times the diameter or maintain unsupported rigidity over long lengths. Please call Thorburn for details. COVER: Available with various cover compounds and wall thicknesses with smooth or corrugated construction as determined by the application and the media. Please call Thorburn for details. SIZES: 12" (12mm) to 48" (1200mm) I.D. up to 100ft (30m) long. Longer lengths available on special order only. SPECIAL NOTES: 1. Thorburn’s 60TMH assemblies are custom designed for specific applications, therefore the construction may vary depending on pressure, bend radius requirements & media. 2. The standard bend radius is typically 6X ID. 3. Corrugating the cover and tube will improve the bend radius at lower pressures. 4. Incorporating annular rings with a smooth tube and cover will improve the bend radius at high pressures. 5. The forces required to make a bend have a direct relation to the pressure. 6. Arches can be added to provide axial movement. 7. Special end configuration (other than shown) are available upon request.

View Complete Details


  • Thread 5184
  • Socket 4216

Met-O-Seal Technical Data Met-O-Seals are medium pressure and low temperature couplings specially designed for leak proof operation with cryogenic liquids (LN2, LOX, LH2) and gaseous service. • Ion exchangers "Met-O-Seal" replace conventional flanges to allow wrench free operation • Steam piping system high temperaturepressure (up to 800oF3000 psi) • Designed for use with liquids or gases from ambient to cryogenic • Leak rates (when connected)

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Pointe-Claire, QC H9R1A9 map, United States