Post Your Requirement Menu

Welcome User

Other Products / Services

We offer a complete product range of Hex Power Bit, 90 Degree Right Angle Drill Attachment Tight Fit Drill Kit - Collet St, Tight Fit Drill Kit-Collet Style, Right Angle Drill Tool Attachment - 90 Degree Threaded Shank Tools Pow and Threaded Shank Drill Bit Set, Short Series

Hex Power Bit

Phillips, sometimes called "pan head", screwdriver bit is used with the Right Angle Tool Attachment for close-quarter assemblydisassembly. The bit is black oxided to prevent corrosion while enhancing appearance.

View Complete Details

90 Degree Right Angle Drill Attachment Tight Fit Drill Kit - Collet St

The 00106 Collet Style Kit uses straight shank drill bits (332", 18", 532", and 316") with matching collets, instead of the need for threaded shank drill bits. The Kit includes: a comfortable, compact, non-slip right-angle drill attachment suitable for use with any portable power drill; four short length (1.1875") National Aerospace Standard 907B non-wandering precision twist drill bits; four precision-machined threaded Desoutter style 932-40 drill collets for each of the listed diameters; and a tight fit three-way wrench (14" for screwdriver bits, 516" for drill bits and extensions & 716" for collets). Instructionswarranty information is also included.

View Complete Details

Right Angle Drill Tool Attachment - 90 Degree Threaded Shank Tools Pow

  • Recommended operating speed not to exceed 2500 rpm Attaches to any power drill (corded/electric or cordless/battery
  • Light weight; right angle drill weighs 1/3 of a pound Threaded components allow for quick and easy tool changes
  • One year warranty, 30 day no-risk trial None

The aircraft style Right Angle Power Drill Adapter allows work to be done in areas with only 2" of clearance. The tool is capable of drilling up to 14" diameter holes and compatible with all standard power drills. Utilization of a molded cavity insures a consistent fit for the precision-made internal components, which include: steel machined internally threaded (14-28 UNF-2B) beveled miter gears, hardened thrust block and driveshaft, and oil-impregnated bearings. The housing which hinges open for easy periodic lubrication is sleeved by a non-slip knurled aluminum grip, that is black anodized for appearance. In addition to TightFit® threaded shank drill bits, the Right Angle Power Drill Attachment allows close-quarter use of many other threaded tools. Note: Required TightFit® threaded shank drill bits can be purchased separately by going to our TightFit® threaded shank drill bits section.

View Complete Details

Tight Fit Drill Kit-Collet Style

The 00106 Collet Style Kit uses straight shank drill bits (332", 18", 532", and 316") with matching collets, instead of the need for threaded shank drill bits. The Kit includes: a comfortable, compact, non-slip right-angle drill attachment suitable for use with any portable power drill; four short length (1.1875") National Aerospace Standard 907B non-wandering precision twist drill bits; four precision-machined threaded Desoutter style 932-40 drill collets for each of the listed diameters; and a tight fit three-way wrench (14" for screwdriver bits, 516" for drill bits and extensions & 716" for collets). Instructionswarranty information is also included.

View Complete Details

Threaded Shank Drill Bit Set, Short Series

Five aircraft quality precision twist drill bits in the following drill diameters: 332, 18, 532, 316 & 14 inches. The overall length, not including the threads, is 1 14". All TightFit® threaded shank drill bits are black oxided to add lubricity, prevent corrosion while enhancing appearance. The drill bits comply with National Aerospace Standards. The Standard provides the following description, "A special short flute, heavy duty drill designed for drilling the hard, high strength alloys used in aircraft manufacturing." The drill bits are made from M2 or M7 tool steel with self-centering, 135 degree, P3 split points and a Rockwell C scale hardness of 63.5 to 66. They are manufactured as right-hand tools with 516" hex wrench flats and 14-28 UNF-2A threads. TightFit® threaded shank drill bits are concentric, self-tightening, non-slipping, long life tools designed for work in limited space situations. TightFit® threaded shank drill bits WORK EQUALLY WELL IN METAL, WOOD OR PLASTIC.

View Complete Details

Threaded Accessories Tight Fit

  • Attaches to any power drill; Recommended operating speed not to exceed 2500 rpm. Light weight; Right angle drill weighs 1/3 of a pound and rotates 360 degrees for tight-spot access.
  • Threaded components allow for fast, easy tool changes; Drill over, under or around obstruction Design allows "deep reach" in confined areas; Provides utility of extension drill
  • Limited warranty, 30 day no-risk trial. None

Description: Space, every inch of it, is at a premium in aircraft design as shape and weight is critical to function. Also, airplanes are riveted together which requires thousands of holes to be drilled in difficult locations without scratching or marring the work surface. So, engineers needed to design a versatile "chuck-less" drill attachment that could reach into very confined areas. The answer was found in putting threads on the shanks of drill bits. The benefits are significant. Threaded shank drill bits eliminate the need for a chucking mechanism. Freed of this restriction, it is possible to do a wide variety of jobs in places with extreme space limitations (less than 1" x 2"). Chuck slippage is all but eliminated while the precision mating angle between threaded drill and drive spindle insures concentricity. Drill bit change times are reduced, an exact working drill bit length is insured and the chance of marring or scratching the work surface is greatly reduced. The Model 00101 Kit includes: a versatile close-quarter Right Angle Drill Attachment capable of drilling up to 14" diameter holes and compatible with all standard power drills, a 6" Threaded Extension for those deep hard-to-reach spots, a Chucking Spud which allows direct use of TightFit® threaded shank drill bits and extensions with your standard power drill, six aircraft quality TightFit® threaded shank drill bits (Combo Drill Bit Set, 00131), a stamped tight fit Three-Way Wrench (14" for screwdriver bits, 516" for drill bits and extensions & 716" for collets), and a compartmented pouch provides compact toolbox or wall-hanging storage. The Tight Fit® Drill Kit can be purchased on a "Risk Free" trial basis. You will be able to make repairs and installations in near-impossible locations. Often, with its first use, the kit pays for itself in time and frustration saved. For example, the ability to drill-out a broken bolt in a tight spot can save hours. And, with care and maintenance, the kit should provide many years of trouble-free use. Suitability: Great for home, work, car, boat, RV and other repairs, installations and restorations. Note: drill bits comply with National Aerospace Standard 907B. Special offer buy two or more for just $40.00 each.

View Complete Details

Threaded Accessories Tight Fit Drill Kit

Space, every inch of it, is at a premium in aircraft design as shape and weight is critical to function. Also, airplanes are riveted together which requires thousands of holes to be drilled in difficult locations without scratching or marring the work surface. So, engineers needed to design a versatile "chuck-less" drill attachment that could reach into very confined areas. The answer was found in putting threads on the shanks of drill bits. The benefits are significant. Threaded shank drill bits eliminate the need for a chucking mechanism. Freed of this restriction, it is possible to do a wide variety of jobs in places with extreme space limitations (less than 1" x 2"). Chuck slippage is all but eliminated while the precision mating angle between threaded drill and drive spindle insures concentricity. Drill bit change times are reduced, an exact working drill bit length is insured and the chance of marring or scratching the work surface is greatly reduced.

View Complete Details

Desoutter Style Precision Drill Collet

Desoutter style 932-40 threaded precision machined drill collet with a 332" hole for round, straight shank drill bits. Black oxided to prevent corrosion while enhancing appearance, the size is stamped on the collet.

View Complete Details

Pro Tool Set

Space, every inch of it, is at a premium in aircraft design as shape and weight is critical to function. Also, airplanes are riveted together which requires thousands of holes to be drilled in difficult locations without scratching or marring the work surface. So, engineers needed to design a versatile "chuck-less" drill attachment that could reach into very confined areas. The answer was found in putting threads on the shanks of drill bits. The benefits are significant. Threaded shank drill bits eliminate the need for a chucking mechanism. Freed of this restriction, it is possible to do a wide variety of jobs in places with extreme space limitations (less than 1" x 2"). Chuck slippage is all but eliminated while the precision mating angle between threaded shank drill bit and drive spindle insures concentricity. Drill bit change times are reduced, an exact working drill bit length is insured and the chance of marring or scratching the work surface is greatly reduced.

View Complete Details

Drill Tool Collet Adapters

escription: The threaded drill collet adapter allows close-quarter use of standard 332, 18, 532, 316, 732 & 14" round shank tools, such as: drill bits, wire wheels, files, countersinks, rasps, sanding & buffing drums, etc. Works with Right Angle Drill Attachment andor Extensions. The hex diameter of the tool is 716" and the length of the tool is 58", excluding the 14-28 UNF-2A external threads. It is black oxided to prevent corrosion while enhancing appearance. Please make sure you select the size of collet you require.

View Complete Details

Threaded Countersink

escription: The Countersink is a 12", six flute, 90 degree, high speed steel countersinkdeburring tool for general purpose work in confined areas. The Countersink can be used to deburr or chamfer with the Right Angle Drill Attachment, andor Extensions. The length of the tool is 58", excluding the 14-28 UNF-2A external threads. It is black oxided to add lubricity, prevent corrosion while enhancing appearance.

View Complete Details

Chucking Spud Quick Release 1/4" Hex Style

Description: The Chucking Spud allows TightFit® drill bits and other 14" hex shank tools to be used conventionallynormally with your standard power drill. There is also the added benefit of reduced tool change times. It has a body length of 78" and diameter of 58" with 14" hex internal hole, a shank diameter of 14" with a shank length of 1-332" and is black oxided to prevent corrosion while enhancing appearance.

View Complete Details

90 Degree Right Angle Drill Attachment Tight Fit Drill Kit - Basic

  • Attaches to any power drill; Recommended operating speed not to exceed 2500 rpm. Light weight; Right angle drill weighs 1/3 of a pound and rotates 360 degrees for tight-spot access.
  • Threaded components allow for fast, easy tool changes; Drill over, under or around obstructions. Design allows "deep reach" in confined areas; Provides utility of extension drill bit se

Space, every inch of it, is at a premium in aircraft design as shape and weight is critical to function. Also, airplanes are riveted together which requires thousands of holes to be drilled in difficult locations without scratching or marring the work surface. So, engineers needed to design a versatile "chuck-less" drill attachment that could reach into very confined areas. The answer was found in putting threads on the shanks of drill bits. The benefits are significant. Threaded shank drill bits eliminate the need for a chucking mechanism. Freed of this restriction, it is possible to do a wide variety of jobs in places with extreme space limitations (less than 1" x 2"). Chuck slippage is all but eliminated while the precision mating angle between threaded shank drill bit and drive spindle insures concentricity. Drill bit change times are reduced, an exact working drill bit length is insured and the chance of marring or scratching the work surface is greatly reduced. The Model 00100 Kit includes: a versatile close-quarter Right Angle Drill Attachment capable of drilling up to 14" diameter holes and compatible with all standard power drills, a 18 inch short TightFit® threaded shank drill bit, and a tight fit Three-Way Wrench (14" for screwdriver bits, 516" for drill bits and extensions & 716" for collets). The Tight Fit® Drill Kit can be purchased on a "Risk Free" trial basis. You will be able to make repairs and installations in near-impossible locations. Often, with its first use, the kit pays for itself in time and frustration saved. For example, the ability to drill-out a broken bolt in a tight spot can save hours. And, with care and maintenance, the kit should provide many years of trouble-free use. Suitability: Great for home, work, car, boat, RV and other repairs, installations and restorations. Note: drill bits comply with National Aerospace Standard 907B. DRILLING SUGGESTIONS To reduce the chance of gear failure and to extend tool life, please follow these suggestions. 1. Reduce RPM speed and drilling pressure at drill "break through". 2. Drill small holes first and then enlarge the holes progressively. 3. Peck drill deep holes to clear chips from the flutes. 4. Coolant use will extend tool life. 5. Re-point drill bits when they become dull. CAUTION: Always wear safety glasses when using these tools. Do not use Ti

View Complete Details

90 Degree Right Angle Drill Attachment Tight Fit Hex Bit Kit

  • Attaches to any power drill/screwdriver; Recommended operating speed not to exceed 2500 rpm. Light weight; Right angle tool weighs 1/3 of a pound and rotates 360 degrees for tight-spot access.
  • Design allows "deep reach" in confined areas. Use standard 1/4" hex tools and power bits
  • Tool is fully reversible (operates in forward and reverse direction) Limited warranty, 30 day no-risk trial.

The Model 00110 Kit includes: a versatile close-quarter, 90 degree, Right Angle Tool Attachment capable of drilling up to 14" diameter holes and compatible with all standard power drillsscrewdrivers; six aircraft quality TightFit® power hex drill bits in the following clearance diameters: 332" long, 18" long & short, 532" long & short, and 316" short; and four power screwdriver bits in the following sizes: #1 & #2 Phillips and #2-4 & #6-8 slotted. The Tight Fit® Hex Bit Kit can be purchased on a "Risk Free" trial basis. You will be able to make repairs and installations in near-impossible locations. Often, with its first use, the kit pays for itself in time and frustration saved. For example, the ability to drill-out a broken bolt in a tight spot can save hours. And, with care and maintenance, the kit should provide many years of trouble-free use. Suitability: Great for home, work, car, boat, RV and other repairs, installations and restorations. Note: drill bits comply with National Aerospace Standard 907B. DRILLING SUGGESTIONS To reduce the chance of gear failure and to extend tool life, please follow these suggestions. 1. Reduce RPM speed and drilling pressure at drill "break through". 2. Drill small holes first and then enlarge the holes progressively. 3. Peck drill deep holes to clear chips from the flutes. 4. Coolant use will extend tool life. 5. Re-point drill bits when they become dull.

View Complete Details

Tight Fit Drill Kit

Space, every inch of it, is at a premium in aircraft design as shape and weight is critical to function. Also, airplanes are riveted together which requires thousands of holes to be drilled in difficult locations without scratching or marring the work surface. So, engineers needed to design a versatile "chuck-less" drill attachment that could reach into very confined areas. The answer was found in putting threads on the shanks of drill bits. The benefits are significant. Threaded shank drill bits eliminate the need for a chucking mechanism. Freed of this restriction, it is possible to do a wide variety of jobs in places with extreme space limitations (less than 1" x 2"). Chuck slippage is all but eliminated while the precision mating angle between threaded shank drill bit and drive spindle insures concentricity. Drill bit change times are reduced, an exact working drill bit length is insured and the chance of marring or scratching the work surface is greatly reduced.

View Complete Details

Heavy Duty TightFit Threaded Shank Drill Bit

  • TightFit® threaded shank drill bits are made of M2 or M7 high-speed steel, for drilling hard, tough None
  • With a 135 degree split-point, 1/4-28 threaded shank and a 5/16" hex adapter for easy removal. ND96
  • Three lengths of drill bits: LONGS=2 1/8"; SHORTS=1 1/4"; and STUBS=1/2-5/8" (excluding the threads) ND96
  • TightFit® threaded shank drill bits are black oxided to add lubricity, prevent corrosion while enhan None
  • These drill bits comply with National Aerospace Standards. ND96

escription: The drill bit complies with National Aerospace Standards. The Standard provides the following description, "A special short flute, heavy duty drill designed for drilling the hard, high strength alloys used in aircraft manufacturing." The drill bits are made from M2 or M7 tool steel with self-centering, 135 degree, P3 split points and a Rockwell C scale hardness of 63.5 to 66. They are manufactured as right-hand tools with 516" hex wrench flats and 14-28 UNF-2A external threads. TightFit® threaded shank drill bits are concentric, self-tightening, non-slipping, long life tools designed for work in limited space situations. TightFit® threaded shank drill bits WORK EQUALLY WELL IN METAL, WOOD OR PLASTIC.

View Complete Details

Drill Bit Short Length

A 332" Short length (1.1875") drill bit with a 135 degree split point, and made of High Speed Steel (M2). It is black oxided to add lubricity, prevent corrosion while enhancing appearance.

View Complete Details

Threaded Shank

escription: The threaded drill collet adapter allows close-quarter use of standard 332, 18, 532, 316, 732 & 14" round shank tools, such as: drill bits, wire wheels, files, countersinks, rasps, sanding & buffing drums, etc. Works with Right Angle Drill Attachment andor Extensions. The hex diameter of the tool is 716" and the length of the tool is 58", excluding the 14-28 UNF-2A external threads. It is black oxided to prevent corrosion while enhancing appearance. Please make sure you select the size of collet you require.

View Complete Details

90 Degree Right Angle Drill Attachment

Description: Space, every inch of it, is at a premium in aircraft design as shape and weight is critical to function. Also, airplanes are riveted together which requires thousands of holes to be drilled in difficult locations without scratching or marring the work surface. So, engineers needed to design a versatile "chuck-less" drill attachment that could reach into very confined areas. The answer was found in putting threads on the shanks of drill bits. The benefits are significant. Threaded shank drill bits eliminate the need for a chucking mechanism. Freed of this restriction, it is possible to do a wide variety of jobs in places with extreme space limitations (less than 1" x 2"). Chuck slippage is all but eliminated while the precision mating angle between threaded drill and drive spindle insures concentricity. Drill bit change times are reduced, an exact working drill bit length is insured and the chance of marring or scratching the work surface is greatly reduced. The Model 00101 Kit includes: a versatile close-quarter Right Angle Drill Attachment capable of drilling up to 14" diameter holes and compatible with all standard power drills, a 6" Threaded Extension for those deep hard-to-reach spots, a Chucking Spud which allows direct use of TightFit® threaded shank drill bits and extensions with your standard power drill, six aircraft quality TightFit® threaded shank drill bits (Combo Drill Bit Set, 00131), a stamped tight fit Three-Way Wrench (14" for screwdriver bits, 516" for drill bits and extensions & 716" for collets), and a compartmented pouch provides compact toolbox or wall-hanging storage. The Tight Fit® Drill Kit can be purchased on a "Risk Free" trial basis. You will be able to make repairs and installations in near-impossible locations. Often, with its first use, the kit pays for itself in time and frustration saved. For example, the ability to drill-out a broken bolt in a tight spot can save hours. And, with care and maintenance, the kit should provide many years of trouble-free use. Suitability: Great for home, work, car, boat, RV and other repairs, installations and restorations. Note: drill bits comply with National Aerospace Standard 907B. Special offer buy two or more for just $40.00 each.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Riverside, CA 92503 map, United States