Our Products #4978558

Hydraulic pumping unit (ref. 01036002) with grip control for use with the 120kN grips (ref. 01036010). Specifications Maximum Pressure: 70MPa10kpsi Minimum Pressure: 10MPa 1.5kpsi Pressure Stability: +-100psi Weight: 76kg170lb Temperature Range: -40 to 177C

The AIM Quick Change Mold, used within the polymer industry, was introduced by Axxicon in 1989. It is a flexible test mold system designed to comply exactly with the internationally accepted ASTM and ISO standards which are also used by CAMPUS the plastics database. The AIM Quick Change Mold is a multi-functional injection mold with interchangeable inserts, used on conventional injection molding machines and capable of producing plastic samples for quality specimen tests according to international standards. AIM Injection compression, 2k (two-shot), and overmolding inserts are also available. Injection Compression moulding (ICM) is used for various applications, for instance very thin-walled products, for optical, well as for moulded parts with a finely textured surface.2K injection moulding or two-shot injection moulding consists of processing two different polymers (or two different colours of one polymer) into an end product by means of one injection moulding process. Overmolding is a plastic injection molding process in which one thermoplastic material is molded over another material to form one part. With special designed AIMTM Quick Change Overmolding Inserts, its possible to injection mold one plastic material over another plasticrubber part or composite.

Tinius Olsen offers a wide range of hydraulic compression testing machine technologies with capacities from 0 to 3000 kN (0 to 600k lbf). Tinius Olsen has extended and expanded its product offering to the Civil Engineering community with its new range of sample collection, sample preparation and specimen testing equipment that is designed specifically for concrete; asphalt; cements, lime, plaster and mortar; and sand, aggregate and fillers. Each category has its own unique series of tests and corresponding specialist equipment. These machines include manaul (DG Series), semi-automatic (MU Series), and fully automatic (FA Series w Horizon software) testing solutions. All of the equipment offers a fully welded construction with a top crosshead, base, and solid side walls. The precision ground hydraulic piston is fixed to the base and the machine's platens are hardened, ground, and polished. The upper platen also comes with self-aligning capability.

Alignment Fixture (ref. 01036004) This allows alignment adjustment to eliminate loading inconsistencies and inaccuracies that frequently occur during sample loading. It has a maximum capacity of 300kN120klbf. Wedge Grip Faces These are used in the side loading hydraulic wedge grip body and are available in a variety of different shapes that best match the specimen profile. Flat Wedge Specimens Specimen Thickness: 1-11.9mm0.04-0.47in 6.1-17mm0.24-0.67in 15-25.9mm0.59-1.02in Narrow Wedge Set Wedge Width: 50.8mm 2in Wide Wedge Set Wedge Width: 101.6mm 4.00in Round Wedge Specimens Specimen Diameter: 15, 20, 30mm0.75, 1.0, 1.2in Vee Wedge Specimens Specimen Diameter: 6.4-10.2mm0.25-0.4in 10.7-16.8mm0.42-0.66in 16.8-20mm0.56-0.79in

When using the double bollard grip, a vice clamp holds the free end of the specimen, which is then wrapped around two bollards in a figure of eight configuration. Friction on the bollards reduces the stress at the clamp point, preventing premature failure of the specimen.The 99-032-0000 grip is used on benchtop materials testing machines.

The 99-033-0000 grip is designed for holding a single bollard grip. The free end of the test specimen is held in a vice clamp. The specimen is then wrapped around a single friction bollard; this friction bollard reduces the concentration of stress at the clamping point and prevents premature breakage of the specimen.

The 99-056-0000 grip is fitted with rubber faced jaws that are spring loaded to retain the specimen prior to applying the final gripping pressure via a knurled thumb wheel.The elastic filament grip is used on ST series materials testing machines.

The grip is designed for testing fabric, webbing, strapping and similar materials. The specimen is wrapped around the 2 in (50 mm) diameter smooth spools with its end securely held between the serrated faces of the split spools.The grip is used on LoCaps, benchtop testers, SL hydraulic testers machines and Electomatic materials testing machines with closed crossheads.

These side loading hydraulic wedge grips (ref. 01036010) are used on high force electromechanical test frames and hydraulic test frames.Applications Metal Other high force specimens Specifications Maximum Capacity: 120kN30klbf Standard Wedge Width: 45mm1.75in* Length Each: 180mm7.4in Weight Each: 30kg67lb Temperature Limits: -40 to 175C Required Hydraulic Pressure: 21MPa3kpsi *Alternate wedge widths available Required accessories (see below) Hydraulic pumping unit Grip faces Alignment fixtures

These side loading hydraulic wedge grips (ref. 01036030) are used on high force electromechanical test frames and hydraulic test frames.Applications Metal Other high force specimens Specifications Maximum Capacity: 300kN60klbf Standard Wedge Width: 50mm2in* Length Each: 180mm7.4in Weight Each: 77kg170lb Temperature Limits: -40 to 175C Required Hydraulic Pressure: 70MPa10kps *Alternate wedge widths available Required accessories (see below) Hydraulic pumping unit Grip faces Alignment fixtures HYDRAULIC TENSILE GRIPS (654 KB)CONTACT (PHONEADDR)EMAIL US

Alignment Fixture (ref. 01036004) This allows alignment adjustment to eliminate loading inconsistencies and inaccuracies that frequently occur during sample loading. It has a maximum capacity of 300kN120klbf. Wedge Grip Faces These are used in the side loading hydraulic wedge grip body and are available in a variety of different shapes that best match the specimen profile. Flat Wedge Specimens Specimen Thickness: 1-11.9mm0.04-0.47in 6.1-17mm0.24-0.67in 15-25.9mm0.59-1.02in Narrow Wedge Set Wedge Width: 50.8mm 2in Wide Wedge Set Wedge Width: 101.6mm 4.00in Round Wedge Specimens Specimen Diameter: 15, 20, 30mm0.75, 1.0, 1.2in Vee Wedge Specimens Specimen Diameter: 6.4-10.2mm0.25-0.4in 10.7-16.8mm0.42-0.66in 16.8-20mm0.56-0.79in