Other Products / Services #3170482

FT SERIES HIGH VALUE SIGNAL CABLES
HIGHLY TRANSPARENT clear outer jacket for enhanced cosmetics
BALANCED twisted pair, silver finished conductors enhance noise rejection
NICKEL PLATED connectors with split tip for enhanced performance and reliability
RIGHT ANGLE CONNECTOR on one end to aid in tough installations
TUG-PROOF sealed internal connection for maximum reliability
MOLDED Y BLOCK for protection of the conductors in critical split point
PROFESSIONAL GRADE performance

Marine 2-way coaxial - 8" w Poly woofer, aluminum tweeter, Automotive grade black painted finish.
Frequency Response: 55 Hz - 20 KHz
Mounting Depth: 3.375 in
Power Handling: 150 watts
Sensitivity: 94 dB

Our NEW marine Tubbie Clamps offer internal hidden wiring, 360 degree rotation, and quick disconnect. They are universally designed to fit towers with widths of 2.125"" up to 3"
Only for use with Bazooka Tubbie Models: MT8100B, MT8100W, MT8265B, MT8265W, MT81LKB, MT81LKW, MT6100BTA, MT6100BTAL, and PR-PP5
Care Instructions: These clamps are designed to perform when exposed to water. However, water build up inside these clamps combined with constant 12 volt power for an extended period of time can cause electrolysis and corrosion to form inside these clamps. When using these Powered Clamps please insure that the 12volt power wire connected to the clamps includes a switch such that 12 volt power can be turned off when the clamps and accessories attached to the clamps are not in use. Additionally, any accessories that are hung from these Powered Clamps should be removed, inspected for water build up, and allowed to dry after having been exposed to excessive water from cleaning, pressure washing, or heavy rain.

Everything under control!
With the new remote control DIRECTOR you lead from the front!
The 2.8 7 cm full colour touchscreen display and the intuitive menu navigation allow an easy handling of many features for example the volume control of all sources, volume control of the subwoofer, source selection, control and configuration of the HEC BT module or switching between sound setups. Furthermore it provides sufficient memory for 20 additional sound setups and comes with a USB connector allowing straight access to your DSP device via the DIRECTOR - a big relief if you want to tweak your configuration while your processoramplifier is hidden somewhere in the trunk. The high-resolution colour touchscreen is embedded in an exclusive solid aluminium housing.
The DIRECTOR is compatible with all DSP products which are supported by DSP PC-Tool Version 3.

Specification midbass
RMS power handling 120 W
Max. power handling 170 W
Impedance 4 Ohms
Diameter 167 mm
Installation diameter mounting depth 143 mm 64mm

Specifications Tweeter
Impedance 4 Ohms
Installaion diameter depth 50 mm 25 mm
Total diameter height with grille 60 mm 41 mm

20 years ago the first BRAX products for the car audio market were built with comprehensive know-how and an enormous pool of experience from the home audio sector. Since then Power Stabilizers and amplifiers have become a reference for exquisite sound and quality characteristics everywhere in the world.

Its only logical that Matrix speakers combine all features that meet the criteria for a typical BRAX-product: The reproduction of pure sound uncompromisingly converted with state-of-the-art technology and best materials - for the unique and impressingly authentic enjoyment of music in your car.

20 years ago the first BRAX products for the car audio market were built with comprehensive know-how and an enormous pool of experience from the home audio sector. Since then Power Stabilizers and amplifiers have become a reference for exquisite sound and quality characteristics everywhere in the world.

Its only logical that MATRIX speakers combine all features that meet the criteria for a typical BRAX-product: The reproduction of pure sound uncompromisingly converted with state-of-the-art technology and best materials - for the unique and impressingly authentic enjoyment of music in your car.

20 years ago the first BRAX products for the car audio market were built with comprehensive know-how and an enormous pool of experience from the home audio sector. Since then Power Stabilizers and amplifiers have become a reference for exquisite sound and quality characteristics everywhere in the world.

Its only logical that MATRIX speakers combine all features that meet the criteria for a typical BRAX-product: The reproduction of pure sound uncompromisingly converted with state-of-the-art technology and best materials - for the unique and impressingly authentic enjoyment of music in your car.

Original factory sound systems typically have a significant disadvantage they dont offer any preamplifier output for driving additional amplifiers.

Heres where the new HELIX AAC comes into play as it generates a perfectly conditioned preamplifier signal from a speaker output signal of an arbitrary car radio or amplifier.

The new AAC is more intelligent than any other signal converter on the market today.

Its Double Activation Circuit creates a remote signal for controlling external amplifiers in two different manners.
Either it detects the DC offset on the speaker output of typical factory radios or uses an integrated signal detection circuit with variable input sensitivity that can be activated additionally.

Especially with its unique sound characteristics the new B-loudspeakers set a course and not only by their individual HELIX-design. Numerous detail improvements and the use of proven components guarantee a maximum of power and longevity. The elaborately coordinated crossovers assure a precise separation of the audio spectrum and a flat frequency response full, deep bass, gentle middles and detailed heights.

Furthermore all speakers are designed for easy installation with low effort. Therefore there is nothing standing in the way of a listening experience at the highest stage.

The 2.8 7 cm full colour touchscreen display and the intuitive menu navigation allow an easy handling of many features for example the volume control of all sources, volume control of the subwoofer, source selection, control and configuration of the HEC BT module or switching between sound setups. Furthermore it provides sufficient memory for 20 additional sound setups and comes with a USB connector allowing straight access to your DSP device via the DIRECTOR - a big relief if you want to tweak your configuration while your processoramplifier is hidden somewhere in the trunk. The high-resolution colour touchscreen is embedded in an exclusive solid aluminium housing.

The RB-AV Series is a cost-effective rack cabinet that is ideal for AV and Security applications. Fully assembled, the RB-AV Series includes pre-installed shelves, filler panels, casters, leveling feet and tapped 10-32 mounting rails.

The RB-AV Series is a cost-effective rack cabinet that is ideal for AV and Security applications. Fully assembled, the RB-AV Series includes pre-installed shelves, filler panels, casters, leveling feet and tapped 10-32 mounting rails.

The RB-AV Series is a cost-effective rack cabinet that is ideal for AV and Security applications. Fully assembled, the RB-AV Series includes pre-installed shelves, filler panels, casters, leveling feet and tapped 10-32 mounting rails.



Constructed in light duty 16-gauge steel.
Two (2) pairs of 19" EIA compliant tapped 10-32 mounting rails.
Starter pack of 10-32 screws and washers.
Locking lightly smoked tempered glass front door is opens a full 180.
Locking solid steel rear door.
Doors can be flipped to hinge from opposite side.
Passive cooling vents located on top, bottom and sides.
Includes provision for up to two (2) optional fans on top panel.
Removable locking side panels.
Removable cable access panels on cabinet top and bottom.
Ships assembled - ready to install.

Double-hinged for easy rear access (body swings open to 120).
Constructed in light duty 16-gauge steel.
Includes two (2) pairs of EIA-310-D compliant square hole punched rails with 19 mounting.
Starter pack of M5 screws and cage nuts included.
Rails are adjustable.
Includes one (1) locking lightly smoked tempered glass reversible front door (hinged on right side as standard).
Includes one (1) pair of locking removable side panels.
Front and side of frame includes venting for air flow.
Top, bottom and rear cable access.
Provision for optional fans on top panel.
Middle body section is not reversible, and hinges on the left side.
Ships assembled - ready to install.
Finished in black powder paint.
Tested to 130 lbs (59 kg) of equipment load capacity.
RoHS Compliant.

Double-hinged for easy rear access (body swings open to 120).
Constructed in light duty 16-gauge steel.
Includes two (2) pairs of EIA-310-D compliant square hole punched rails with 19 mounting.
Starter pack of M5 screws and cage nuts included.
Rails are adjustable.
Includes one (1) locking lightly smoked tempered glass reversible front door (hinged on right side as standard).
Includes one (1) pair of locking removable side panels.
Front and side of frame includes venting for air flow.
Top, bottom and rear cable access.
Provision for optional fans on top panel.
Middle body section is not reversible, and hinges on the left side.
Ships assembled - ready to install.
Finished in black powder paint.
Tested to 130 lbs (59 kg) of equipment load capacity.
RoHS Compliant.

Double-hinged for easy rear access (body swings open to 120).
Constructed in light duty 16-gauge steel.
Includes two (2) pairs of EIA-310-D compliant square hole punched rails with 19 mounting.
Starter pack of M5 screws and cage nuts included.
Rails are adjustable.
Includes one (1) locking lightly smoked tempered glass reversible front door (hinged on right side as standard).
Includes one (1) pair of locking removable side panels.
Front and side of frame includes venting for air flow.
Top, bottom and rear cable access.
Provision for optional fans on top panel.
Middle body section is not reversible, and hinges on the left side.
Ships assembled - ready to install.
Finished in black powder paint.
Tested to 130 lbs (59 kg) of equipment load capacity.
RoHS Compliant.

Low-profile slim design.
Constructed of rugged light weight aluminum.
Designed for a variety of applications:
Install in your server cabinets
Wall mount cabinets
Open frame racks
Or install horizontally above your work bench.
Each outlet strip included a hardware mounting kit. Order PN: 1585CLIP for additional hardware kit.
Receptacles are 1 square and are equally spaced over the length of the power strip.
With onoff switch and 15 Amp circuit breaker.

Low-profile slim design.
Constructed of rugged light weight aluminum.
Designed for a variety of applications:
Install in your server cabinets
Wall mount cabinets
Open frame racks
Or install horizontally above your work bench.
Each outlet strip included a hardware mounting kit. Order PN: 1585CLIP for additional hardware kit.
Receptacles are 1 square and are equally spaced over the length of the power strip.
With onoff switch and 15 Amp circuit breaker.

Keep your audiovisual equipment cool without the noise associated with server cabinet fans.



Kit includes:
One (1) or Two (2) Ball bearing type fan(s).
One (1) or Two (2) chrome metal grills per fan.
One (1) cord assembly.
One (1) package of mounting hardware.
Fan component is recognized to UL 507 and CSA certified.

Constructed of 14 or 16 gauge steel.
Sold in packs of ten (10) unless otherwise noted.
Steel organizer or provides cable strain relief.
Available with either 90 or 45 degree offset.
Finished in black powder paint.
RoHS and REACH compliant.
Manufactured in North America.

Output Power RMS Max:
at 4 Ohms 2 x 150 Watts 250 Watts
at 2 Ohms 2 x 270 Watts 450 Watts
at 1 Ohm 2 x 395 Watts 650 Watts
at 4 Ohms bridget 1 x 540 Watts 900 Watts
at 2 Ohm bridget 1 x 790 Watts 1300 Watts

Especially with its unique sound characteristics the new B-loudspeakers set a course and not only by their individual HELIX-design. Numerous detail improvements and the use of proven components guarantee a maximum of power and longevity. The elaborately coordinated crossovers assure a precise separation of the audio spectrum and a flat frequency response full, deep bass, gentle middles and detailed heights.

Furthermore all speakers are designed for easy installation with low effort. Therefore there is nothing standing in the way of a listening experience at the highest stage.

Designed for power distribution from the front andor rear of the unit.
1U horizontal 19" rackmount installation.
With lighted onoff switch or red pilot light to indicate power on.
6 outlet models include 2 outlets with extra spacing for clearance of most plug in transformers.
Available in ASA 61 grey or black powder coat finish.

Remote Bass Control Unit for use with BTAxx250D, and BTAxx250D-DE Series, 250 Watt Class D Amplified Bazooka Bass Tubes subwoofers. Cord Length: 16.5ft5M

Introducing our first ever Class D amplified tubes. With 250 watts of pure digital power, and optional speaker level outputs these new Amplified Tubes are the most powerful and best sounding Amplified Tubes we've ever made.
While this single Amplified Tube will surely deliver the unprecedented performance you demand, if just you want MORE, simply connect a Passive Tube (sold separately) to the optional speaker level output and DOUBLE your BASS.
As with all Bass Tubes Enclosures , the BTA6250D comes with straps to keep the sub securely mounted, while still making removal quick and easy if you need even more cargo room. Optional Chrome-Plated UMS Brackets give a flashier look, as well as a more secure, permanent mounting when removal isn't a problem.
Features:
Patented Bass Tubes enclosure design
6 High efficiency woofer
Class D amplifier technology (200W RMS @ 4 Ohm 275W RMS @2 Ohm)
Optional Speaker Output for a BT6014 Bass Tube

Wiring kit includes ELA-Harness, power wire, connectors, screws, fuseholder and fuse. Works With: T62A30, T82A30, EL6A, EL6A-HP, EL8A, EL8A-HP, EL10A, EL10A-H P, BTA6100, BTA8100, BTA10100, CS8A, TA850, TMS8A-HP-S, SM8A, SM10A, MBTA10100, MBTA8100

Remote Bass Control Unit for use with EL, BTAxx100, and MBTAxx100 Series, 100 Watt Amplified Bazooka Bass Tubes subwoofers. Cord Length: 16.5ft5M

MAINPOWER CABLES FOR INSTANTANEOUS HIGH CURRENT TRANSFER
SOFT TOUCHTM jacket to enhance the feel and flexibility
BLUE & SILVER translucent matte finish jacket for enhanced cosmetics
RESISTANT JACKET against abrasion, heat and chemicals, made of ELEC 88
6+1 STRAND MULTIPLE TWIST TECHNOLOGY, for instantaneous high current response and
to minimize eddy current power losses
X3 FLEXIBLE for REFERENCE installations

FT SERIES PROFESSIONAL SPEAKER CABLES
CLEAR, HIGHLY TRANSPARENT jacket to enhance look
ZERO GRIP JACKET for easy installation
MULTIPLE TWIST WINDING CONFIGURATION for enhanced music reproduction
X2 FLEXIBLE for HIGH VALUE installations

20 VOLT DESIGN for high current capability
LOW ESR for better current transfer >1, 5 mW
WIDE TEMPERATURE RANGE for constant performance
ANTI-VIBRATION DESIGN for improved reliability
ELECTROLYTE RESERVE for long lasting capability
TOLERANCE 2%
Digital voltmeter included