Twin City Fan & Blower

• SeriesBAE-SW

Application The BAE-SW Centrifugal Fan is designed to handle large volumes of relatively clean air at low to moderate pressures in applications such as HVAC, combustion air supply, filtration and drying systems, fume hood and spray booth and other exhaust systems, air pollution control (clean side of dust collectors) and other industrial processes. The BAE-SW is constructed with an airfoil wheel and incorporates hollow airfoil blades for higher efficiencies and better sound quality. All housings are reinforced with rigid bracing to increase structural integrity. The support angles are intermittently welded and caulked between welds to prevent bleed-through corrosion. Sizes (wheel diameters) 12.25 to 98.25 inches (315 mm to 2, 500 mm) Performance Airflow to 233, 100 CFM (396, 000 m3hour) Static pressure to 20 inches w.g. (4, 950 Pa)

• SeriesBC-SW

Application The BC-SW Centrifugal Fan is designed to handle large volumes of relatively clean air at low to moderate pressures in applications such as HVAC, combustion air supply, filtration and drying systems, fume hood and spray booth and other exhaust systems, air pollution control (clean side of dust collectors), industrial processes. Wheels are constructed of steel using flat single thickness blades, solid welded to the rim and backplate. The inlet-side rim is designed as a proper companion for the inlet cone. All wheels are statically and dynamically balanced to grade BV3 per AMCA 204 for smooth operation prior to being assembled in the fan, followed by final balance of the entire rotating assembly. All BC-SW fan housings are continuously welded and reinforced with rigid bracing to increase structural integrity. The support angles are intermittently welded and caulked between welds to prevent bleed-through corrosion.

• SeriesNFC-SW

Application The NFC-SW is designed to handle large volumes of relatively clean air at low to moderate pressures. Sizes (wheel diameters) 12.25 to 49 inches (315 mm to 1, 245 mm) Performance Airflow to 96, 500 CFM (164, 000 m3hour) Static pressure to 4 inches w.g. (990 Pa)

• SeriesBCS

Application The BCS Backward Curved High VolumePressure Fan is designed for handling relatively clean air in high pressure applications. Typical applications include combustion air, product cooling, moisture blow-off, forced draft on fluid bed boilers, and induced draft after baghouse process blowers. The BCS wheel features heavy-gauge steel construction and a non-overloading wheel design, suitable for applications requiring large volumes of air at moderate to high pressures. All wheels are statically and dynamically balanced to grade G6.3 per ANSI S2.19 for smooth operation prior to assembly of the fan, followed by a final balance of the entire rotating assembly. Sizes (wheel diameters) 16.5 to 89 inches (420 mm to 2, 265 mm) Performance Airflow to 280, 000 CFM (475, 700 m3hour) Static pressure to 40 inches w.g. (9, 950 Pa)

• SeriesBCSF

Application The BCSF Centrifugal Composite Fan is a backward curved industrial fan designed for handling particulate-free, corrosive or caustic air in high pressure applications where conventional steel and stainless steel fans would corrode. Typical industries that utilize this style of fan include pulp-and-paper, steel processing, petrochemical plants, and wastewater-treatment facilities. All of the parts that are exposed to the airstream are constructed of high-quality corrosion resistant materials to avoid material breakdown from most chemicals. The BCSF also features a wide wheel and housing, producing a high volume of air at a lower velocity. Sizes (wheel diameters) 16.5 to 60 inches (420 mm to 1, 525 mm) Performance Airflow to 145, 900 CFM (247, 900 m3hour) Static pressure to 34 inches w.g. (8, 450 Pa)

• SeriesFA

Application The FA Fiberglass Roof Ventilator is specifically designed for the exhaust of moisture-laden, corrosive, or chemically contaminated air frequently associated with natatoriums, aquariums, indoor swimming pools, laboratories, and waste water treatment plants. The FA's fiberglass housing is virtually impossible to dent, crack, or break and is resistant to weather, salt spray, and most chemicals. Fiberglass housings also absorb noise and vibration. Sizes (wheel diameters) 7 to 18.5 inches (180 mm to 470 mm) Performance Airflow to 3, 125 CFM (5, 300 m3hour) Static pressure to 1 inches w.g. (250 Pa)