UKAM Industrial Superhard Tools

Precision formulated and graded for most demanding applications & your specifications. Polycrystaliline diamond has more cutting surfaces per particle, resulting in higher removal rates. Monocrystalline is more cost affective and has good stock removal and surface finish quality for most common applications.

Diamond pellets are ideally suited to superfine glass, sapphire and ceramics. Coolant can be effective applied to reach the work surface. This feature also enhances swarf dispersion witch is needed for may of the superfining operations. UKAM Industrial provides a wide variety of pellet sizes and matrix compositions to accommodate all phases of pellet grinding applications. Diamond pellets are available in standard diameters ranging from ¼” to 1” diameter. Diamond concentration for pellets must be in correlation to diamond grit size Roughing to semi finishing (100 to 400 mesh) – 100 concentration Semi-finishing (45 microns) – 75 concentration Finishing (20-30 microns) – 50 concentration Super-finishing (15-20 microns) – 35 concentration Pre-polish grinding (6-9 microns) – 25 concentration

consumables for materials preparation, metallography, quality control, materials research. For sectioning, rough grinding, fine grinding, polishing. Abrasive Cut off Wheels Diamond Wafering Blades Bonded Abrasives Diamond Compounds Diamond Suspensions Diamond Powder Polishing Cloth & Pads Diamond Discs Abrasive Powders & Slurries

Excellent cut quality with low wear rate Stronger Blade Superior Cut Quality Less Chipping Improved Kerf Wdith Creates very thin kerfs, can handle high exposure to width ratios Improved Diamond Exposure, requires less blade dressing than other blades used to cut silicon and III-V (semiconductor) material UKAM Industrial Superhard Tools proprietary blade manufacturing processes, which allow precise control of diamond grit size, diamond concentration, and nickel bond hardness, are used to optimize these variables and produce hub blades that offer unparalleled cut quality, blade life and throughput. SMART CUT™ series Nickel Bond Hubbed diamond dicing blades provide excellent performance on large variety of applications ranging from silicon dicing, very brittle III-V compound materials, PZT ceramics, tantalates, aluminas, to silica filled plastics for chip scale package singulation.

icing Blades from 0.5" (12.7mm) to 6" (154mm) in Diameter, starting from .001" Thick. Diamond Slicing Blades from 3” (75mm) to 48”. For all applications and all types of Dicing & Slicing machines such as: K & S (Micro-Swiss) + Disco + ADT + Veeco + MECO + MTI + ITI + Meyer & Burger + Surface Grinders + Many Others

SMART CUT Synthetic Water Soluble coolant (fully contamination free) will reduce heat & friction between dicing blade and material. And improve overall dicing performance by as much as 30%.