Other Products / Services #4943613

SMART CUT Synthetic Water Soluble coolant (fully contamination free) will reduce heat & friction between dicing blade and material. And improve overall dicing performance by as much as 30%.

Diamond pellets are ideally suited to superfine glass, sapphire and ceramics. Coolant can be effective applied to reach the work surface. This feature also enhances swarf dispersion witch is needed for may of the superfining operations. UKAM Industrial provides a wide variety of pellet sizes and matrix compositions to accommodate all phases of pellet grinding applications.

Diamond pellets are available in standard diameters ranging from to 1 diameter.

Diamond concentration for pellets must be in correlation to diamond grit size

Roughing to semi finishing (100 to 400 mesh) 100 concentration

Semi-finishing (45 microns) 75 concentration

Finishing (20-30 microns) 50 concentration

Super-finishing (15-20 microns) 35 concentration

Pre-polish grinding (6-9 microns) 25 concentration

Excellent cut quality with low wear rate

Stronger Blade

Superior Cut Quality

Less Chipping

Improved Kerf Wdith

Creates very thin kerfs, < 50 microns

can handle high exposure to width ratios

Improved Diamond Exposure, requires less blade dressing than other blades

used to cut silicon and III-V (semiconductor) material
UKAM Industrial Superhard Tools proprietary blade manufacturing processes, which allow precise control of diamond grit size, diamond concentration, and nickel bond hardness, are used to optimize these variables and produce hub blades that offer unparalleled cut quality, blade life and throughput. SMART CUT series Nickel Bond Hubbed diamond dicing blades provide excellent performance on large variety of applications ranging from silicon dicing, very brittle III-V compound materials, PZT ceramics, tantalates, aluminas, to silica filled plastics for chip scale package singulation.

icing Blades from 0.5" (12.7mm) to 6" (154mm) in Diameter, starting from .001" Thick. Diamond Slicing Blades from 3 (75mm) to 48. For all applications and all types of Dicing & Slicing machines such as: K & S (Micro-Swiss) + Disco + ADT + Veeco + MECO + MTI + ITI + Meyer & Burger + Surface Grinders + Many Others

Precision formulated and graded for most demanding applications & your specifications. Excellent for sample preperation, metallographic, materials research, mold, die and tool polishing, toolroom use, polishing to final tolerance of ceramic parts, initial charging of lapping plates and discs, and other processes that require mirror finish and close tolerance performance.

6" to 24" (150mm to 609mm) diamond grinding, polishing, & lapping machines for Industry and R & D. Designed coarse & fine grinding and polishing of Advanced, Ultra Hard & Brittle Materails, Optical Materials, Composites. High hardness materials including metals, ceramics, refractories, cement, and petrographic thin sections. As well as full range of optical materials, such as: Bk7, Fused Silica, Zeroder, Quartz, Soda Lime Glass, Yag, Sapphire, and Many Other Materials.

consumables for materials preparation, metallography, quality control, materials research. For sectioning, rough grinding, fine grinding, polishing.

Abrasive Cut off Wheels

Diamond Wafering Blades

Bonded Abrasives

Diamond Compounds

Diamond Suspensions

Diamond Powder

Polishing Cloth & Pads

Diamond Discs

Abrasive Powders & Slurries

6" to 24" (150mm to 609mm) diamond grinding, polishing, & lapping machines for Industry and R & D. Designed coarse & fine grinding and polishing of Advanced, Ultra Hard & Brittle Materails, Optical Materials, Composites. High hardness materials including metals, ceramics, refractories, cement, and petrographic thin sections. As well as full range of optical materials, such as: Bk7, Fused Silica, Zeroder, Quartz, Soda Lime Glass, Yag, Sapphire, and Many Other Materials.

6" to 24" (150mm to 609mm) diamond grinding, polishing, & lapping machines for Industry and R & D. Designed coarse & fine grinding and polishing of Advanced, Ultra Hard & Brittle Materails, Optical Materials, Composites. High hardness materials including metals, ceramics, refractories, cement, and petrographic thin sections. As well as full range of optical materials, such as: Bk7, Fused Silica, Zeroder, Quartz, Soda Lime Glass, Yag, Sapphire, and Many Other Materials.

Precision formulated and graded for most demanding applications & your specifications. Excellent for sample preperation, metallographic, materials research, mold, die and tool polishing, toolroom use, polishing to final tolerance of ceramic parts, initial charging of lapping plates and discs, and other processes that require mirror finish and close tolerance performance.