Post Buy Requirement
US
United States
Add Review

Our Products

FRAME FILM MOUNTERS

Ultron Systems' Model UH114 & UH115 Series Mounters set the benchmark for both control and versatility. For dicingsawing applications, uniform adhesive plastic film lamination is paramount. Our mounters feature an easily adjustable spring-loaded roller assembly, along with film-tensioner bars along both the x- and y-axes to ensure bubble-free lamination of the film to the wafer and film frame. In addition, both models feature a retractable film cutting system with adjustable cutting pressure to accommodate various tape base materials and thicknesses. Roller pressure is adjusted from the topside of the units for different process requirements and to accommodate various wafer thicknesses. A digital temperature controller ensures consistent workstage temperatures for repeatable mounting. Adjustable alignment pins and vacuum cups accommodate almost any type of film frame, including plastic. The workstage height is also adjustable relative to the frame height for different wafer thicknesses. Using our Mounters, operator variables are virtually eliminated.
View Complete Details

WAFER BACKGRINDING PROTECTIVE-FILM REMOVER

Ultron Systems' Model UH110 and UH110-8 Semiautomatic Film Removers demount film from
3" to 8" wafers after the backgrinding or etching process. The virtual 180 peeling angle ensures more efficient peeling and lower stress on the wafer, resulting in higher yields.
Both systems outperform time-consuming hand removal at a fraction of the cost of fully automatic equipment. Throughput is as high as 200 wafershour. The standard Model UH110 can accommodate up to 6" wafers, while the Model UH110-8 handles 8" wafers and smaller. Adjustments from one size wafer to another can be made in seconds by simply changing the workstage. Push-button operation assures ease of use with all operator variables eliminated.- Short removal cycle for higher throughput
- Virtual 180 peeling angle for lower wafer stress and higher yields
- Heated wafer stage: ensures film removal with minimal stress to wafer
- Quick peeling-tape reloading
- Easy disposal of demounted protective film
- No special operator training required
- Compact, tabletop size
- Faster and lower cost than conventional chemical removal method
- Interchangeable wafer stage accommodates different sizetype of wafers
- Removes film from wafers down to 8 mil thick wafer [UH110-8]
- [Model UH110]: Up to 6" waferfilm frame capability (Standard wafer stage included)
- [Model UH110-8]: Up to 8" waferfilm frame capability (Standard 8" stage included)
View Complete Details

Uv Curing Systems

Ultron Systems' Models UH102-8 and UH102-12 UV Curing Systems offer inexpensive solutions for the curing of UV films in easy-to-use benchtop packages, without sacrificing control or versatility.
- Self-contained, bench-top model
- Nitrogen purge to assure complete curing of UV adhesive
- Easily programmable, microprocessor-based controller
- Lamp intensity measurement port
- Serpentine-style grid lamp for even, consistent UV exposure
- Ideal for low to mid-volume production and R&D applications
- Accommodates up to 8" (200mm) wafers on film frames or grip rings (UH102-8); up to 12" (300mm) wafer capability (UH102-12)
- Exhaust hook-up
View Complete Details

WAFER CLEANING SYSTEMS

Ultron Systems' Model UH117 Wafer Cleaning System provides an ideal solution for cleaning wafers after sawing or scribing. Operation is semiautomatic and fully programmable via the new touchscreen LCD panel. Microprocessor control ensures precise, flexible, uniform, and repeatable cleaning. Up to 10 programs can be stored for different processes. Each program may have up to 99 different cleaningrinsingdrying steps with a maximum of 999 seconds per step. The unit is capable of cleaning wafers up to 8-inches in diameter or up to 6-inches in diameter mounted on a film frame or grip ring. An optional liquid additive injection feature is available to facilitate the cleaning cycles. Both hot and cool dry modes are available for faster, more efficient drying.
Semiautomatic operation, fully programmable
- Touchscreen LCD panel
- Microprocessor control, ensures precise, flexible, uniform, and repeatable cleaning
- Store 10 programs, each with up to 99 different cleanrinsedry steps, with 999 seconds maximum per step
- Non-volatile memory for program storage
- Accommodates up to 8" diameter wafers; and up to 6" diameter wafers mounted on a film frame or grip ring
- Interchangeable chuck capability
- Both hot and cool dry modes available
- Standard waferwafer carrier chuck with vacuum hold (specify waferwafer carrier size)
View Complete Details

ADHESIVE PLASTIC FILMS

Ultron Systems' Silicone-Free Adhesive Plastic Films contain absolutely NO silicone release agents, resulting in a much cleaner process and more consistent adhesive properties. They share both the same linear elongation properties and uniformity of base film as well as adhesive properties similar to our other film lines.
View Complete Details

Grip Ring Separator Tool

Easily separate grip ring segments with minimal effort with our NEW Grip Ring Separator Tool! No more forceful -- and often painful -- finger pressure while separating grip rings.
Makes grip ring separation a "snap"
- Extremely durable and long lasting
- Works on many non-USI grip rings
- Low cost
View Complete Details

Standard UV

Ultron Systems' UV Adhesive Plastic Films have the advantage of high adhesive strength -- for the securing of waferssubstrates during sawing -- which becomes significantly reduced after UV light exposure, to facilitate die removal. This tape provides an ideal media for thin wafer dicing, followed by gentle die removal. We are proud to offer the widest selection of UV film available to meet even your most stringent process requirements.
High adhesive strength (normally reduced after UV light exposure)
- Consistent adhesive properties and uniform elongation properties
- Exceptional quality
- Wide range of UV film with different thicknesses and adhesive strengths
View Complete Details

Antistatic UV

Ultron Systems' Antistatic UV Adhesive Plastic Films are the best choice when your process requirements are most demanding. For static-selective devices, do not let ESD become a process variable. The Antistatic layer dissipates negative charge build-up, typically resulting from removal of the protective backing film from the adhesivebase film, or during wafer mounting, sawing, etc. Additionally, the Antistatic UV Adhesive Plastic Film series share the same benefits as our standard UV films. Negative charge build-up is dissipated with our Antistatic layer
- Same demanding film properties as our standard UV film
- Selection of Antistatic UV film available for varying needs and requirements
View Complete Details

DIE-MATRIX EXPANDERS

Ultron Systems' Model UH132 Series Motor Drive Die Matrix Expanders set another higher standard in precision wafer expansion and die presentation. Based on the highly popular UH130 Series, the new UH132 sibling continues to offer precise control of die separation process parameters, but now incorporates a new motor drive design with digital speed control that offers even greater precision to wafer expansion by producing both linear and uniform expansion throughout the entire drive stroke. A new programmability feature of the UH132 Series allows pre-heat (dwell) time and ram speed to both be saved, providing total control and maximum accuracy and precision for consistent, repeatable results. Die separation distance is precisely controlled with the Model UH132 Series.
- Accommodates up to 8" (200mm) wafersfilm frames (Model UH132) and 12" (300mm) wafersfilm frames (Model UH132-12)
- Motor driven ram with digital speed control and 2.6" adjustable stroke (ram height)
- Motorized circular cutter assembly (Standard on Model UH132-12; Option on Model UH132)
- Digital temperature-controlled heated stage with thermistor
- Adjustable stroke stop, resulting in consistent repeatability of expansion
- Die separation distance precisely controlled for consistent repeatability
- Exact height adjustment by 10-turn dial indicator (one-to-one ratio)
- Up to 9 programs for adjustable pre-heat time (up to 99 seconds) & ram speed (18 speed settings)
- Safety over-pressure sensor and slip clutch for ram stop
- Emergency stop button
- Plexiglass shroud, anti-static
- Upper & lower clamp assembly
- Lower clamp (outer grip ring) assembly & upper clamp (inner grip ring) assembly can hinge separately to allow use of larger grip rings (UH132-12)
- Alignment pins provide easy and precise film frame placement
- Reduced alignment times and increased yield from automated processes
- Operator variables virtually eliminated
View Complete Details

Grip Rings

Accommodates a wide range of wafers
- Minimizes product damage and handling
- Registration notches facilitate accurate, quick, and consistent engagement
View Complete Details

FILM FRAMES

Accommodates a wide range of wafers
- Minimizes product damage and handling
- Registration notches facilitate accurate, quick, and consistent engagement
View Complete Details

Magazines

Accommodates a wide range of wafers
- Minimizes product damage and handling
- Registration notches facilitate accurate, quick, and consistent engagement
View Complete Details

SHIPPERS MAGAZINES

Accommodates a wide range of wafers
- Minimizes product damage and handling
- Registration notches facilitate accurate, quick, and consistent engagement
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Ultron Systems, Inc.)
  • Moorpark, CA 93021 map, United States
  • Share us via