Post Buy Requirement
UI
United States
Add Review

Other Products / Services

Thumb Nuts

  • Diameter 1/4" / 5/16" / 3/8" / 7/16" / 1/2" / 9/16"
  • SHAPE Round, Hex
  • KNURL Straight (for easy grip)
  • Material Brass, Aluminum, Stainless Steel
We offer your firm engineering and design services for customized or modified parts, at no additional charge- please contact our Engineering Department. Contact Us
Thumb Nuts 14" thru 34", 6mm thru 19mm- Lengths: 14" thru 1532", 6mm thru 12mm. Unicorp Thumbnuts- round, knurl straight, hex, no knurl, brass, aluminum, stainless steel, carbon steel in 20 finishes.
View Complete Details

Swage Standoffs Swage Spacers

  • Shape Round and Hex
  • Material Brass, Aluminum, Stainless Steel
  • DIAMETER 1/8" / 5/32" / 3/16" / 1/4"
After installation they are permanently affixed to the board and further assembly becomes simplified. Installation is accomplished by using any means of force. Normal equipment, such as an arbor press, punch press, are most commonly used. If swaging is planned, the hole must be countersunk. For rivet type installation, an ordinary drilled or punched hole, of the correct diameter, is adequate. Available in both threaded and unthreaded clear hole types.
View Complete Details

Standoffs Externally Threaded

  • Diameter 1/8" / 5/32" / 3/16" / 1/4" / 5/16" / 3/8" / 1/2"
  • Shape Round, Square and Hex
  • Material Brass, Aluminum, Stainless Steel
Male- Male Standoffs 18" thru 12", 3mm thru 13mm- Lengths: 164" thru 6", .5mm thru 100mm. Unicorp MaleMale Standoffs round-square-hex, 26 finishes, available in brass, aluminum, stainless steel, carbon steel, nylon, Delrin. Stock 18" thru 12", 3mm thru 13mm in lengths of 164 of an inch increments to eliminate the need for special orders.
View Complete Details

Spacers Unthreaded Standoffs

  • Diameter 1/8" / 5/32" / 3/16" / 1/4" / 5/16"
  • Shape Round, Square and Hex
  • Material Brass, Aluminum, Stainless Steel,
Spacers Standoffs 18" thru 34", 3mm thru 19mm- Lengths: 164" thru 10", .5mm up to 51mm. Unicorp Spacers round-square-hex, 28 finishes, available in brass, aluminum, stainless steel, carbon steel, nylon, Teflon, Phenolic, Lexan, Delrin, Ultem. Stock 18" thru 34", 3mm thru 19mm, in lengths of 164" increments to eliminate the need for special orders.
View Complete Details

Male-Female Standoffs Internal Threads

  • Diameter 1/8" / 5/32" / 3/16" / 1/4"
  • Material Brass, Aluminum, Stainless Steel
  • SHAPE Round, Square and Hex
Male- Female Standoffs 18" thru 12", 3mm thru 13mm- Lengths: 132" thru 9", .5mm up to 200mm. Unicorp MaleFemale Standoffs round-square-hex, 26 finishes available in brass, aluminum, stainless steel, carbon steel, nylon, Delrin. Stock 18" thru 12", 3mm thru 13mm in lengths of 164 of an inch increments to eliminate the need for special orders.
View Complete Details

Standoffs Threaded

  • Diameter 1/8" / 5/32" / 3/16" / 1/4" / 5/16" / 3/8" / 1/2" / 5/8" / 3/4"
  • Shape Round, Square and Hex
  • Length 1/64" (.015) increments- up to 10"
Unicorp Standoffs 18" thru 34", 3mm thru 19mm- Lengths: 164thru 10", .5mm thru 254mm. Unicorp Standoffs round-square-hex, 28 finishes, available in brass, aluminum, stainless steel, carbon steel, nylon, Teflon, Phenolic, Lexan, Delrin, Ultem. Stock in 18" thru 34", 3mm thru 19mm in lengths of 164" increments to eliminate the need for special orders.
View Complete Details

Dowel Pins

  • Diameter 1/64"
  • Numbers DP188-015-250 - DP188-015-500
Standard Press-Fit Hardened - A Series
18-8 Stainless Steel 303 Stainless Steel
316 Stainless Steel 416 Stainless Steel
4140 Alloy Steel
4140 Alloy Steel with Black Oxide Finish

Press-Fit Hardened & Ground - C Series
Carbon Steel

Precision Slip-Fit - D Series
303 Stainless Steel

Precision Interference-Fit - E Series
303 Stainless Steel
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Unicorp Inc)
  • Orange, NJ 07050 map, United States
  • Share us via