Our Products #4982081

The RTO Series FAA obstruction light utilizes a unique optical, electrical and mechanical design. The RTO Series is the most universal, compact and efficient obstruction light in the world. ETL Certified to the FAA requirements, the RTO Series fixture is also ICAO and Transport Canada compliant. Also available as a single fixture for direct replacement of incandescent lamplens technology. Features: Available as a single, dual or retro-fit unitAvailable in 120 277 VAC; and 12 48 VDCGrounding terminals providedUnique optical design (patent pending)Advanced high-flux LED technologyEstimated service life 12-15-yearsWeathercorrosion resistant lamp assembly and housingSelf-contained wiring compartment eliminates additional boxesThreaded 1 and bottom hub for mountingCan be operated steady or flashedUses 95% less energy than incandescent5-year warrantyResistant to shock and vibrationIP65 IP66 NEMA 4X

Explosion proof controls for hazardous locations are a big part of what we do, and what we can offer you, the customer. Our experience in providing UL Class 1, Div 1, UL Class 1, Div 2, ATEX and other international standards is wide and deep; its one of our specialties and what sets us apart. Whether you want traditional cast or air purged, let our fabrication and assembly experts build a custom system to your specifications.

The Unimar GPS controlled beacon, PN: USL40X provides synchronized flashing of multiple units in wind farms and other applications. The Unimar GPS controlled beacon not only provides the synchronized flashing function but also the following alarm monitoring with LED status indicators: Beacon failureLoss of GPS pulse signalPhotocell failureLoss of powerThe monitoring, flashing, synchronization and alarm functions are integrated into one solid state module. This module is mounted in the base of the beacon, protecting the device from heat, sun and UV rays. With a good GPS signal, beacon synchronization is maintained whenever power is applied to the controller. The output to the LED beacon is controlled by the internal Photo-Control. Additional features include GPS signal monitoring, an option switch for selectable flashrate and option switch for photocell monitoring.

The D464 Series LED based medium intensity red beacon utilizes state-of-the-art optical design to achieve the most compact, efficient, FAA compliant L864 device in the market. While it readily interfaces into existing installations, its robust, low power design will provide years of maintenance-free service. Features: 5-year performance warrantyFAA AC No 1505345-43FCompliant to ICAO (Annex 14 Fourth Edition, July 2004)Over 90% more efficient than an incandescentLasts years longer than an incandescentSteady Burn or Flashes (20-40fpm) when paired with Unimar ControllerResistant to shock and vibrationFCC Testing EMC #47CFR, Part 15; 2008; Class A

The all LED Medium Intensity White Strobe and Red Beacon is designed for the lighting of chimneys, silos, flarestacks and other obstructions to aerial navigation as specified by the FAA and FCC. The Dual L864L865 uses LED technology for light output for both the Red Beacon and the White Strobe. Unlike conventional Xenon flashtube technology, little or no maintenance is required during its lifetime. Working voltages of less than 200 VDC are significantly less than those of Xenon flashtube designs. Therefore, this system represents an advance in safety. The Dual L864L865 LED Beacon operates from a 100230 VAC 5060 Hz supply. The power supplycontrol box can be located up to 550 ft away from the light engine, such as at the base of the tower. Features: 5-year warranty; 10+ year life expectancyNo moving or serviceable parts in Flash Head, all replacement components located at tower baseEasy access, color coded terminal block for quick and easy installationHinged Flash Head with color coded terminal block for secure cable installStrategically placed control components to simplify troubleshootingNo-Fault current limiters built in to protect system from incorrect installsNo high voltages as found in Xenon systemsPatented optics eliminate ground scatterResistant to shock and vibrationTested and passed surge tests up to 1.9 Million VoltsNo EMI or RFIP66 rated

L70 rated for >100, 000 hours @ 25C5 year full performance warrantyInstant onoff operationSuperior color rendition index compared to HPS, LPS, MVMercury freeResistant to shock and vibrationTemperature compensation technology for longer lifeFactory sealedLow T-rating compared to traditional

The DM-900 has eight inputs that can be configured for contact closure or voltage alarms. These inputs can be configured as: Alarm, Event or Normal for both the Normally Closed and Normally Open conditions. Paging via alphanumeric labeling is used to simplify the reading and understanding of the reported alarms. The DM-900 has a built in photocell monitor that works with 110VAC photocells. It has selectable daynight alarm timers and logs when the photocell changes from day to night and back to day. The cabinet door is monitored and can be used to generate an alarm for quarterly tests or for tamper detection. When there is a power loss, an onboard circuit monitors the battery voltage disconnecting it before the voltage drops to low and causes damage to the backup battery. The DM-32 Alarm Monitor can deliver alarms directly to an alphanumeric pager or a PC located at a Network Operations Center (NOC) when any standard POTS line is used. The DM-32 has thirty-two contact closure inputs for monitoring a variety of alarm conditions. These inputs can be configured as: Alarm, Event or Normal for both the Normally Closed and Normally Open conditions. There are eight control outputs that can be triggered by the alarm inputs. Paging via alphanumeric labeling is used to simplify the reading and understanding of the reported alarms.

The 860 Series is the FAA type L-810 red LED obstruction light. Designed for steady burning, this fixture is used to mark any obstacle that may present hazards to aircraft navigation. Features: Available as a single or dual unitAvailable in 12; 24 or 48VDC, 120 VAC & 220 VAC (50 or 60 Hz)Earth grounding provisions providedUnique optically designed lens to enhance LED operation and provide 360 visibilityState-of-the-art high-flux LED technologyEstimated service life 12-15-yearsWeathercorrosion resistant lamp assembly and housingSelf-contained wiring compartment eliminates additional boxesThreaded 1 and bottom hub for mountingCan be operated steady or flashed5-year warrantyResistant to shock and vibration

The PCR Series Photo Control is a combination of precision electronic circuitry, electromechanical output, and unique molded plastic housing. The PCR was designed and built to meet the demands of the most rigorous requirement of tower and obstruction control. Each unit is factory calibrated to meet FAA and FCC specifications. The PCR Series is packaged in a cast aluminum junction box. Features: Two 30 ampere load contactsMeets FAA and FCC requirementsDirect replacement of older and newer typesStable electronic circuitryMolded plastic control housing with gasketCast aluminum junction box with one-inch hubs, top and bottomLED Power Indication: Surge Protected