Our Products #4982081

The RTO Series FAA obstruction light utilizes a unique optical, electrical and mechanical design. The RTO Series is the most universal, compact and efficient obstruction light in the world. ETL Certified to the FAA requirements, the RTO Series fixture is also ICAO and Transport Canada compliant. Also available as a single fixture for direct replacement of incandescent lamplens technology.



Features:



Available as a single, dual or retro-fit unit
Available in 120 277 VAC; and 12 48 VDC
Grounding terminals provided
Unique optical design (patent pending)
Advanced high-flux LED technology
Estimated service life 12-15-years
Weathercorrosion resistant lamp assembly and housing
Self-contained wiring compartment eliminates additional boxes
Threaded 1 and bottom hub for mounting
Can be operated steady or flashed
Uses 95% less energy than incandescent
5-year warranty
Resistant to shock and vibration
IP65 IP66 NEMA 4X

Explosion proof controls for hazardous locations are a big part of what we do, and what we can offer you, the customer. Our experience in providing UL Class 1, Div 1, UL Class 1, Div 2, ATEX and other international standards is wide and deep; its one of our specialties and what sets us apart. Whether you want traditional cast or air purged, let our fabrication and assembly experts build a custom system to your specifications.

The Unimar GPS controlled beacon, PN: USL40X provides synchronized flashing of multiple units in wind farms and other applications. The Unimar GPS controlled beacon not only provides the synchronized flashing function but also the following alarm monitoring with LED status indicators:

Beacon failure
Loss of GPS pulse signal
Photocell failure
Loss of power
The monitoring, flashing, synchronization and alarm functions are integrated into one solid state module. This module is mounted in the base of the beacon, protecting the device from heat, sun and UV rays. With a good GPS signal, beacon synchronization is maintained whenever power is applied to the controller. The output to the LED beacon is controlled by the internal Photo-Control.

Additional features include GPS signal monitoring, an option switch for selectable flashrate and option switch for photocell monitoring.

The D464 Series LED based medium intensity red beacon utilizes state-of-the-art optical design to achieve the most compact, efficient, FAA compliant L864 device in the market. While it readily interfaces into existing installations, its robust, low power design will provide years of maintenance-free service.



Features:

5-year performance warranty
FAA AC No 1505345-43F
Compliant to ICAO (Annex 14 Fourth Edition, July 2004)
Over 90% more efficient than an incandescent
Lasts years longer than an incandescent
Steady Burn or Flashes (20-40fpm) when paired with Unimar Controller
Resistant to shock and vibration
FCC Testing EMC #47CFR, Part 15; 2008; Class A

The all LED Medium Intensity White Strobe and Red Beacon is designed for the lighting of chimneys, silos, flarestacks and other obstructions to aerial navigation as specified by the FAA and FCC. The Dual L864L865 uses LED technology for light output for both the Red Beacon and the White Strobe. Unlike conventional Xenon flashtube technology, little or no maintenance is required during its lifetime. Working voltages of less than 200 VDC are significantly less than those of Xenon flashtube designs. Therefore, this system represents an advance in safety. The Dual L864L865 LED Beacon operates from a 100230 VAC 5060 Hz supply. The power supplycontrol box can be located up to 550 ft away from the light engine, such as at the base of the tower.

Features:

5-year warranty; 10+ year life expectancy
No moving or serviceable parts in Flash Head, all replacement components located at tower base
Easy access, color coded terminal block for quick and easy installation
Hinged Flash Head with color coded terminal block for secure cable install
Strategically placed control components to simplify troubleshooting
No-Fault current limiters built in to protect system from incorrect installs
No high voltages as found in Xenon systems
Patented optics eliminate ground scatter
Resistant to shock and vibration
Tested and passed surge tests up to 1.9 Million Volts
No EMI or RF
IP66 rated

L70 rated for >100, 000 hours @ 25C
5 year full performance warranty
Instant onoff operation
Superior color rendition index
compared to HPS, LPS, MV
Mercury free
Resistant to shock and vibration
Temperature compensation technology
for longer life
Factory sealed
Low T-rating compared to traditional

The DM-900 has eight inputs that can be configured for contact closure or voltage alarms. These inputs can be configured as: Alarm, Event or Normal for both the Normally Closed and Normally Open conditions. Paging via alphanumeric labeling is used to simplify the reading and understanding of the reported alarms. The DM-900 has a built in photocell monitor that works with 110VAC photocells. It has selectable daynight alarm timers and logs when the photocell changes from day to night and back to day. The cabinet door is monitored and can be used to generate an alarm for quarterly tests or for tamper detection. When there is a power loss, an onboard circuit monitors the battery voltage disconnecting it before the voltage drops to low and causes damage to the backup battery.

The DM-32 Alarm Monitor can deliver alarms directly to an alphanumeric pager or a PC located at a Network Operations Center (NOC) when any standard POTS line is used. The DM-32 has thirty-two contact closure inputs for monitoring a variety of alarm conditions. These inputs can be configured as: Alarm, Event or Normal for both the Normally Closed and Normally Open conditions. There are eight control outputs that can be triggered by the alarm inputs. Paging via alphanumeric labeling is used to simplify the reading and understanding of the reported alarms.

The 860 Series is the FAA type L-810 red LED obstruction light. Designed for steady burning, this fixture is used to mark any obstacle that may present hazards to aircraft navigation.



Features:

Available as a single or dual unit
Available in 12; 24 or 48VDC, 120 VAC & 220 VAC (50 or 60 Hz)
Earth grounding provisions provided
Unique optically designed lens to enhance LED operation and provide 360 visibility
State-of-the-art high-flux LED technology
Estimated service life 12-15-years
Weathercorrosion resistant lamp assembly and housing
Self-contained wiring compartment eliminates additional boxes
Threaded 1 and bottom hub for mounting
Can be operated steady or flashed
5-year warranty
Resistant to shock and vibration

The PCR Series Photo Control is a combination of precision electronic circuitry, electromechanical output, and unique molded plastic housing. The PCR was designed and built to meet the demands of the most rigorous requirement of tower and obstruction control. Each unit is factory calibrated to meet FAA and FCC specifications. The PCR Series is packaged in a cast aluminum junction box.

Features:

Two 30 ampere load contacts
Meets FAA and FCC requirements
Direct replacement of older and newer types
Stable electronic circuitry
Molded plastic control housing with gasket
Cast aluminum junction box with one-inch hubs, top and bottom
LED Power Indication: Surge Protected