Vector Electronics & Technology, Inc

United States

• Board Length11.75" ( 298mm)
• Board Height3U ( 3.937") ( 100mm )
• SeriesDIN 41612
• PCB Thickness0.062" (1.6mm)

Excellent performance with a multi layer design ■ Individual signal tracking with interruption option ■ Voltage & Current measuring facilities ■ Full ground plane ■ Signal pin-out identification silkscreened onto outer PCB layers ■ Jumper Blocks provided to allow signal line interrogation ■ Max. current per contact @ nominal 50o C = 1.75A ■ Controlled impedence, Signal trace shielding ■ Voltage rating 200 RMS or 300 VDC

• Size3U x 8HP

Standard PCI output Voltages : 5.0V, 3.3V, +12.0V, -12.0V ■ Hot swap, N+1 redundancy with internal OR-ing diodes ■ .99 power factor corrected AC 90-264V input ■ DC 36-72V (48V nom.), or DC 18-32V (24V nom.) ■ Current sharing on 5.0V and 3.3V outputs ■ Power & Fault LED indicators to faceplate ■ Excellent performance ■ Complies with all requirements of PICMG 2.11 ■ Fully compliant with EU RoHS directive** ■ cULus, TUV, CE marked ■ Standard Telco (Type VII) handles or as specified

• SeriesVME64x

Vector Electronics and Technology, Inc. provides a VME, VME64x Air blocker, 6U x 160mm x 4HP slot for deflecting airflow in chassis empty slots. Connector will engage for proper fit, assumes that the backplane has automatic or electronic BUSGRANTIACK daisy-chaining. 6U x 160mm bypass plate with air baffles and connector shells with no pins. Conforms to mechanical specification of IEEE 1101.1, IEEE 1101.10 6U x 160mm x 4HP slot ■ Two 96-pin DIN 41612 male connector shells with no pins mounted on plug-in side​​ ■ Blocks air flow for empty slots​ ■ VME64x with EMC type Front Panel and Type IV InjectorEjector handles ■ VME with Non EMC Front Panel and Type I Ejector handle​s

• Material10-layer FR-4 Epoxy Glass construction
• Series​​VME64, VME64x

Vector offers comprehensive range of VMEbus backplanes from 2 to 21 slots. VME J1J2 and VME64x J1J2P0 backplanes per ANSIVITA 1.1-1997. Monolithic 6U high VME64 and VME64x backplanes are fully RoHS compliant and perform to ANSIVITA 1.7-2003 (R2009) increased current level for VME (96 pin) and VME64x (160 pin) DINIEC connectors. VME64x incorporates a 5 row, 160 pin DIN connector which provides extra IO and signal lines but also backward compatibility with traditional VMEbus systems that uses 96 pin DIN connectors. Both VME64 and VME64x backplanes are 6U high are an easy replacement or addition to any 6U subrack system.​ VME64, VME64x Backplane Specification : ANSI VITA 1.1-1997 ■ Compliant to : ANSI VITA 1.7-2003 (R2009) ■ Greater than 64MHz high speed design ■ Shielded signal lines & Controlled Imepedence ■ Electronic Bus Grant & IACK Daisy chaining ■ Screw Terminals (Power Bugs) for power input ■ On board termination ■ Surface mount pressfit technology ​■ Available in 2, 3, 4, 5, 6, 7, 8, 10, 12, 16, 20 or 21 Slots

• Width19
• SeriesSeries 2150
• Height5U / 8.72
• Depth12.5

Features​ ■ Versatile chassis for vertical card installation ■ Accepts 3U x 160mm Eurocards in front and 3U x 80mm rear transition modules in rear ■ Accommodates 3U high VME, VME64x, cPCI, PXI or VPX Backplanes ■ IEEE 1101.1 1101.10 1101.11 compliant ■ High reliability, Low MTTR ■ Designed for compliance with UL, FCC CE marking​ ■ Fully assembled, wired and tested iew ■ Front bottom air intake with rear top exhaust ■ 2150-Superior cooling with push-pull hot swappable blowers ■ 2150-Three individually hot swappable blowers mounted below the card cage (optional) ■ 2150-Three individually hot-swappable blowers mounted above the card cage ■ 2151-Three individually hot-swappable axial fans mounted below the card cage ■ Removable and cleanable air filter

• SeriesIEC 60603-2

DIN connectors for backplane and daughter card interconnects with three rows (a, b, c) of contacts on 0.100"(2.54mm) centers are available in wire-wrap or solder tail type terminations.