Post Buy Requirement
VI
United States
Add Review

Our Products

Miscellaneous Plumbing

Vektek manifolds are specifically designed for fixturing applications, providing reliable operation up to 350 bar working pressure
Manifolds are widely used on multi-sided tombstone fixtures and dual table-index CNC machining centers
VektorFloMetric Hoses are intended to operate up to 350 bar. They have end fittings with the largest possible orifice to reduce restrictions and allow devices to work better.
Steel Tubing is also rated at 350 bar.
View Complete Details

TuffGrip Double Acting Work Supports

  • Capacity 2750
  • Series Model No. 10-0208-00
  • WireƘ 0.045
  • Free Length 1.50
TuffGrip Double Acting Work Supports are unique in the industry and their secret weapon is a radically new sleeve design. Thicker by 2.5 times over other work supports on the market, this efficient sleeve consistently contacts around the plunger to give uniform clamping load and grip. This feature provides an improved uniform clamping surface with reduced Elastic Deformation under load.

You will want to use TuffGrip work supports whenever your application requires positive retraction of the work support plunger such as in automatic or un-attended applications. The support plunger is retracted when hydraulic pressure retracts the shuttle cylinder, meaning you will not be relying on a mechanical spring to return the plunger to its initial starting position.

You will want to consider TuffGrip work supports whenever your application requires extremely tight tolerances. When pressurized, the TuffGrip work support sets a new industry standard for minimizing elastic deformation and maximizing uniformity in clamping surface stability.

You will want to use TuffGrip work supports if you have an application where the single acting fluid advanced work support may "kick" your part out of position when unclamping the system. The hydraulic pressure on the internal sleeve gripping the plunger is maintained until the double acting positioning piston retracts, opening an internal check valve. This check valve releases the pressure on the sleeve, releasing the plunger after it has been "pulled" back from the piece part. This "shuttle" action prevents "part ejection" that can be experienced in some instances with fluid advanced work supports.
View Complete Details

Work Supports

Highly repeatable, repeats position 0.0002 inches
Standard SAE porting is located in the base of the support for easy access to both the clamp and vent ports (bronze filter installed before shipping).
Design features insure VektorFlo work supports last longer and stand up to harsh environments and abuse better than models without these features.
Proprietary wiper and seal designs reduce contamination and drag for longer lasting, better performing work supports.



image

Coating on the cylinder bodies helps prevent corrosion.
Special large diameter plungers and sleeves provide greater rigidity.
Cartridge mount work supports are available in all styles for installation into customer machined cavities.
View Complete Details

Position Sensing

Use TuffGrip return position sensing work supports in any automated system when it is critical to know that the work supports are retracted before beginning the unloadload cycle. Whenever an extended work support could cause a machine, robot, or other tool crash, the position of the work support has become critical. TuffGrip offers the extra measure of vigilance that could mean the difference between profit and loss.
View Complete Details

Accessory Valves

Vektek accessory valve designs are specifically intended for use in hydraulic clamping systems.
Steel components, hardened operating parts and flow rates matched to the demands of workholding.
Vektek valves will deliver safe, reliable long-life.
Vektek accessory valves prevent system damage and erratic operation frequently experienced through the use of valves designed for general industrial applications.
Sequence Valves' two-port design eliminates the need for a third fluid line to drain bypass flow (internal leakage) back to system reservoir.
View Complete Details

Power Supplies

Vektek airhydraulic boosters multiply shop air line pressure to power simple hydraulic systems without electricity.
Available for single-acting cylinders with or without control packages
Screw Pumps Available in Threaded Body or Block Body Style
BHC (Black Hard Coating) on Screw Pump Bodies
View Complete Details

TuffCam Swing Clamps

  • Clamp Capacity 450
  • Model No. 81-5505-30
  • Kit Description KIT, SC, LP, TC, 5000/22KN, SA, RH
  • Old Bottom Flange Model No. 15-2718-00
TuffCam Swing Clamps meet your demand for a product that can handle the stress and positioning requirements of high-speed or heavy arm applications. These tri-cam design clamps, with their patented Cam Follower Seat, can position and clamp in one second or less, handle large arms with ease and include the Clocking feature that dramatically reduces the time it takes to change arms for maintenance, replacement or fixture setup.
Available in these body styles:

Threaded Body
Top Flange
Top Flange Long Stroke
Bottom Flange
Bottom Flange Long Stroke
Cartridge Mount
Rod Position Sensing
Magnetic Position Sensing
Low Profile Top Flange
Low Profile Bottom Flange
Low Profile Rod Position Sensing
Low Profile Magnetic Position Sensing
Single and double acting devices available.The Low Profile Single Acting models have increased spring forces for positive return in higher backpressure applications.
Three cams for more accurate arm positioning, smoother rotation and lower per cam surface contact pressure.
Vektek again changes the "state of the art" in ball and cam swing clamps making them work better at reasonable prices.
Patented ball seat for improved rotary function, cam follower contact, and reduced dynamic and static friction.
Standard fluorocarbon wipers improve coolant compatibility.
Both TuffCam and TuffCam Low Profile include the Clocking feature that uses standard Vektek arms.
Same mounting envelope as standard VektorFlo swing clamps.
BHC (Black Hard Coating) on the cylinder bodies helps prevent scoring and scratching
View Complete Details

Low Profile Magnetic Reed Position Sensing

  • Model No. 41-4222-21-PS
  • Cylinder Capacity (kN) 22
  • A (mm.) 65.5
Metric Low Profile Magnetic Position Sensing Swing Clamps

Sensor mounting housing is concentric to the plunger shaft
Double Acting Clamps
Available for TuffCam Low Profile 22 kN and 33 kN
models only.
Tuffcam Clocking feature uses standard length Vektek arms.

BHC (Black Hard Coat) on the cylinder body helps prevent scarring and scratching.
Sensor Kits Ordered Separately

46-2297-00
PNP Position Sensing Kit includes:
a 29-7001-00 Sensor and
a 27-6424-00
cord set

46-2297-01
NPN Position Sensing Kit includes:
a 29-7001-01 Sensor and
a 27-6424-00
cord set

The use of NPN or PNP is determined by the type of control unit to which the sensor is connected. One Sensor is required for each sensing position.
Sensor Features

Normally open contact
LED indicator light
10 to 30 VDC operating range
3 Watt maximum contact rating
< or = 0.8 ms Switch- off time
> or = 1.0 ms Switch-on time
View Complete Details

Bottom Flange

  • Model No. 41-4202-11
  • Cylinder Capacity (kN) 2
  • Vertical Clamping Stroke (mm) 5.5
  • Total Stroke (Swing + Vertical) (mm) Total Stroke (Swing + Vertical) (mm)
Tuff Cam Bottom Flange Swing Clamps
Single and Double Acting

Available in three capacities 2kN, 4.9 kN and 11.6 kN with standard arm at 350bar pressure
Three cams for more accurate arm positioning, smoother rotation and lower per cam surface contact pressure
Patented ball seat for improved rotary function, cam follower contact, and reduced dynamic and static friction
Fluorocarbon wipers are standard for improved coolant compatibility
Tungsten-Carbide cam followers for strength and wear
Standard models swing is 90 with swing angles of less than 90 available using restrictors. Swings of more than 90 are special order products.
See Clamp Time and Fluid Flow Rate chart regarding flow rate limits and time calculations to be observed to avoid damage and preserve warranty.
TuffCam clocking feature uses standard Vektek arm
Arms Sold Separately.
BHC (Black Hard Coating) on the cylinder bodies helps prevent scoring and scratching.

Bottom unclamp porting is available.

Vent port with bronze filter gives single acting swing clamps a place to "breathe" and helps keep contamination from entering breather port.
View Complete Details

Thread-In Coupling Element

  • Model Number 45-6101-30
  • Coupling Type Pressurized
  • Nominal Diameter 3
  • Thread M20 x 1.5
  • Max. Operating Pressure (l/min) 350 Bar
Thread-In Coupling Elements

Coupling elements are made to give you a leak free connection whether pressurized or depressurized. Two flow rates are allowed with your choice of two nominal diameter sizes. The compact design allows couplings to be recessed into the fixture plate. Stainless steel construction provides long service life with replaceable face seals.

Axial face seal between coupling mechanism and coupling nipple.
Both elements must be positioned and guided within specified tolerances before contact with sealing surfaces.
Coupling force at operating pressure ranges from 0-3.3 and 0-7.7 KN depending on model.
Spanner and replacement seal installation tools available.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Vektek, Inc.)
  • Emporia, KS 66801 map, United States
  • Share us via