Our Products #5042267

Machine to produce automatically transposed green bars for generators (ROEBEL bars).
This fully automatic Roebel Bar Manufacturing Center is one of the top products of Vincent Industrie using highest quality standards. It is recognized by all major players of the energy industry thanks to its precision, reliability, automaticity and robustness.
The Roebel Bar Manufacturing Center is designed to dereel, to straighten, to strip, to cut and to transpose copper conductors fully automatically.

This equipment will optimize your productivity and reduce your costs and thereby obtaining a better manufacturing management. One operator is sufficient to run the machine with extremely high precision on a repetitive basis.

Main Advantages:
Motorized dereeling to avoid conductor overtightening in order to preserve its quality;
Entirely automated transposition process (presses) for highest flexibility, possibility to change parametersmodel without losing accuracy;
Pulling carriage connected to the STM traction unit for a faster dereeling and pulling even for long wires;
High accuracy also for long wire lengths;
Roebel cross over-shaping by independent and mobile presses equipped with pneumatically controlled tooling for a fully automatic manufacturing of copper wires with a wide variety of transpositions;
Each press has 2 tooling in order to reduce tool changes for large scale manufacturing;
Before and after the shaping process, wires are picked and placed automatically and securely by a set of manipulators
Finished wires are laid in a magazine (equipped with a tilting system) in the right order to facilitate the final, manual braiding operation;
The version "H" of the machine is able to produce alternatively two kinds of conductors, solid and hollow.

This equipment is flexible and can easily be adapted to your requirements and your production needs; you can chose from a BC 4360 to manufacture 4m long bars up to a 360 maximum transposition to a BC 14900 for the manufacture of 14m bars with 900 maximum transposition.

Automatic machine to apply consolidation tape onto green bars prior to pressing.
The BTM was designed recently by Bartech International, the Canadian subsidiary of Vincent Industrie, well known for its high quality taping, pressing and looping equipment and recognized in the industry since more than 20 years.
The machine applies automatically sacrifice tape and thereby fixes special compound (mastic) on the straight part of green bars. This process is necessary before consolidating the bar into a heating press.
This new equipment will optimize your productivity and reduce your production costs at the same time.

While Bartech International produces this machine for the Americas, Vincent Industrie is capable to supply this equipment to the European, African and Asian markets.

Main advantages:
Automatized application of consolidation tape onto straight parts of the bars
Automatic filling of compound
Applicable for different bar lengths
Roller conveyors proposed in option for easy handling
High accuracy, efficiency and robustness for long term investment.

This equipment is flexible and can easily be adapted to your requirements and your production needs; one can choose between different frame lengths covering your bar size.

Machine to consolidate straight parts of bars, loops or coils.
The BPP was initially designed by BARTECH International, the Canadian subsidiary of Vincent Industrie, well known for its high quality taping, pressing and looping equipment and recognized in the industry since more than 20 years.

The BPP series is designed to press-consolidate bars, loops or one leg of pre-impregnated formed coils.
It consists of 1 press bank using a cavity and a number of press heads specified by the pressure to be applied. Closure of the press cavity is realized by means of a hinged member (lever).
Two hydraulic cylinders are mounted on each press head, one in the horizontal direction and one in the vertical direction.

Depending on the dimension of the cavity, this press gives the possibility to superpose and consolidate several products at the same time.
This equipment will thereby optimize your productivity and reduce your production costs.

While BARTECH International produces this machine for the Americas, Vincent Industrie is capable to supply this machine to the European, African and Asian markets.

Main advantages:
Possibility for simultaneous pressing of several loopscoilsbars to increase production capacity
All press heads are mounted on linear bearings. This ensures accurate alignment and allows the heads to be positioned for different slot lengths.
Electrical heating plates - Water cooling
PLC control of entire process (including jogging)
Precise heat and pressure control
User interface via touch screen


This equipment is flexible and can easily be adapted to your requirements and your production needs.

Machine to consolidate straight parts of bars for hydro and turbo generators
The BPS was initially designed by Bartech International, the Canadian subsidiary of Vincent Industrie, well known for its high quality taping, pressing and looping equipment and recognized in the industry since more than 20 years.
The BPS-series is designed to press-consolidate large bars, it consists of 1 press bank using a cavity and a number of press heads specified by the pressure to be applied. Closure of the press cavity is realized by means of a horizontal mobile beam.
Two hydraulic cylinders are mounted on each press head, one in the horizontal direction and one in the vertical direction.
Depending on the dimension of the cavity, this press gives the possibility to superpose and consolidate several products at the same time.

This equipment will thereby optimize your productivity and reduce your production costs.

While Bartech International produces this machine for the Americas, Vincent Industrie is capable to supply this machine to the European, African and Asian markets.

Main advantages:
Possibility for simultaneous pressing of several bars to increase production capacity;
All press heads are mounted on linear bearings. This ensures accurate alignment and allows the heads to be positioned for different slot lengths;
Electrical heating plates - Water cooling;
PLC control of entire process (including jogging);
Precise heat and pressure control;
User interface via touch screen.

This equipment is flexible and can easily be adapted to your requirements and your production needs; one can choose between different frame lengths covering your bar size.

Automatic machine to form copper bars for Turbo generators.
The TBFM is an equipment designed by Vincent Industrie (VI) capable to form turbo bars with great accuracy on a repetitive basis. VI has the reputation in the industry to manufacture reliable and robust machines out of which this one is a major example.

The Turbo Bar Forming Machine is designed to shape green bars using a PLC controlled forming head that performs multiple, successive bending steps automatically, thereby assuring an outstanding evolvent shaping accuracy for such big products measuring up 14m in total length.

This equipment will thereby optimize your productivity and reduce your production costs significantly.


Main Advantages:
A unique equipment in the market;
Fully electrical machine, no hydraulics;
Highly accurate positioning and forming, fast maneuvering and great flexibility using efficient brushless motors;
Direct integration of 3D modeling in the machine software;
One bar can be formed, consolidated, cut and brazed in less than 1 hour;
Fast parameter setup for new geometries, parameter storage, error assistance messages and operator screens available in many languages;
Several options available: internal or external consolidation station, bar loading and unloading system, cutting & brazing systems,
Can include one or two forming heads or double working stations for shorter cycle times.

This equipment is flexible and can easily be adapted to your requirements and your production needs.

Download our Flyers to learn more about the TBFM capacities or contact directly your GEMO-TEC Technical Sales Representative for more information (pricing estimations, order, offers, equipment functioning, demonstrations) by clicking on the CONTACT button on the top right: Gemo-tec.

Taping machine for the insulation of small or medium sized coilsbars.
The TIM was initially designed by Bartech International, the Canadian subsidiary of Vincent Industrie, well known for its high quality taping, pressing and looping equipment and recognized in the industry since more than 20 years.
This table taping machine can tape any kind of coils and bars of a certain size, please review the data sheet for more details.
This equipment will optimize your productivity and reduce your production costs at the same time.

While Bartech International produces this machine for the Americas, Vincent Industrie is capable to supply this equipment to the European, African and Asian markets.

Main advantages:
Excellent pricequality ratio;
Easy installation and training
Low machine footprint;
Capable to tape any kind of insulating materials without separating foil;
High taping quality;
Precise overlapping by means of belt conveyors
Possibility to use different mechanical taping heads;
Coil support for easier handling.

This equipment is flexible and can easily be adapted to your requirements and your production needs.

Download our Flyers to learn more about the TIM capacities or contact directly your GEMO-TEC Technical Sales Representative for more information (pricing estimations, order, offers, equipment functioning, demonstrations) by clicking on the CONTACT button on the top right:

Automatic machine to form copper bars for Hydro generators.
The HBFM is an equipment designed by Vincent Industrie (VI) capable to form hydro bars with great accuracy on a repetitive basis. VI has the reputation in the industry to manufacture reliable and robust machines out of which this one is a major example.
The Hydro Bar Forming Machine is designed to shape green bars using PLC controlled forming head(s) that perform(s) multiple, successive bending steps automatically, thereby assuring an outstanding evolvent shaping accuracy.


The Hydro Bar Forming Machine exists in 2 versions:
HBFM 110: Single forming head, used for cross sections up to 110x30mm
HBFM 90: Double forming head, used for cross sections up to 90x30mm

This equipment will thereby optimize your productivity and reduce your production costs significantly.

Main Advantages:
A unique equipment in the market;
Fully electrical machine, no hydraulics;
Highly accurate positioning and forming, fast maneuvering and great flexibility using efficient brushless motors;
Direct integration of 3D modeling in the machine software;
One bar can be formed, consolidated, cut and brazed in less than 1 hour;
Fast parameter setup for new geometries, parameter storage, error assistance messages and operator screens available in many languages;
Several options available: internal or external consolidation station, bar loading and unloading system, cutting & brazing systems,
Can include one or two forming heads for shorter cycle times.

This equipment is flexible and can easily be adapted to your requirements and your production needs.

Machine to prepare copper wires by derolling, straightening, stripping and cutting.
The STM was designed by Vincent Industrie, with high quality standards recognized throughout the Energy industry thanks to its reliability and robustness. Indeed, the first machine was installed in 1999 and is still in operation.

The Stripping Machine is designed to dereel, to straighten, to strip and to cut to length conductors automatically. These are fundamental steps for the preparation of green bars for Turbo or Hydro generators.
It can also be used for the wire preparation for open DC-coils.

This equipment will optimize your productivity and reduce your costs by obtaining a better manufacturing management. One operator is sufficient to run the machine with extremely high precision on a repetitive basis.

Main Advantages:
Motorized dereeling to avoid conductor overtightening in order to preserve its quality
Automatic stripping obtaining highest surface quality
Vertical and horizontal straightening
Motorized pulling carriage for wire introduction in order to decrease setup time
Only 10-25s cycle time for the production of one finished wire
Two brushing stations equipped with metallic brushes (horizontal and vertical stripping)
High quality stripping performed by two brushes that move laterally for optimal wear
An efficient particle exhaust system Vincent Industrie patent - to remove stripped insulation particles
High accuracy conductor positioning and cutting system
After stripping and cutting to length, wires can be placed automatically in a magazine equipped with a tilting system for specific batch size preparation
Control system with PLC allowing a high degree of automation


This equipment is flexible and can easily be adapted to your requirements and your production needs; we can offer STM SINGLE or STM DOUBLE wire preparation for both solid and hollow conductors.

Automatic Machine to form loopsbars with a length up to 5m.
The CFMU-B machine is an innovative development of the classical Coil Forming Machine (CFM) of VINCENT INDUSTRIE. It is capable to form coils with high accuracy and efficiency.
Thus, using this new design, the flexibility of the machine could be significantly increased while decreasing its weight at the same time, assuring nevertheless the same robustness and accuracy of the classical, well known CFM-version.

The Coil Forming Machine Universal CFMU-B is designed to automatically form coils to their final shape without using any additional process before or after forming. Lowest tolerances assure the perfect fitting of the coils into the slots without any manual rework.

This equipment will thereby optimize your productivity and reduce your production costs at the same time for a better manufacturing management.

Main Advantages:
Completely electrical machine, no hydraulics
Accurate positioning, fast manoeuvring and great flexibility using only brushless motors;
Soft forming process for all types of coils (standard, trapezoid, flat) in order to avoid any damages of conductor surface;
Fast setup of machine for new geometries, PLC control, parameter storage, error assistance messages;
High forming accuracy ( 1 mm on clamps positioning);
Flexible and adjustable evolvent shapers as modular systems to be able to form all possible evolvent lengths and shapes, no manual work is required even for high opening angles;


This equipment is flexible and can easily be adapted to your requirements and your production needs.