Post Buy Requirement
VS
United States
Add Review

Sensors

MODEL 1006A

The VIP Sensors Model 1006A is a small triaxial piezoelectric
accelerometer designed for vibration measurement in three
orthogonal axes. Its light weight (17 grams) minimizes mass
loading. The accelerometer is a self-generating device that
requires no external power source for operation. The transducer
features three 10-32 receptacles for output connection and is
typically screw mounted.
The Model 1006A utilizes the PZT-5 crystal material, exhibiting
stable output sensitivity over the operating temperature range.
Signal ground is connected to the case of the unit. Low-noise,
flexible coaxial cables are used for error-free operation.
VIP Sensors Signal Conditioner Models 5002 and 5005 are
recommended for use with this high impedance accelerometer.
View Complete Details

MODEL 1010A

The VIP Sensors Model 1010A is a miniature piezoelectric
accelerometer for vibration measurement on mini-structures and
small objects. Its light weight of 1.2 grams effectively minimizes
mass loading. The accelerometer is a self-generating device that
requires no external power source for operation.
The Model 1010A exhibits a broad frequency response range and
a high resonance frequency. It utilizes a piezoelectric crystal
material that exhibits stable output sensitivity over the operating
temperature range. The accelerometer features a M3 connector
for low-noise, flexible coaxial cables that are used for error-free
operation.
VIP Sensors Signal Conditioner Models 5002 and 5005 are
recommended for use with this high impedance accelerometer.
View Complete Details

MODEL 1011A

The VIP Sensors Model 1011A is a miniature piezoelectric
accelerometer for vibration measurement on mini-structures and
small objects. Its light weight of 1.2 grams (without the integral
low-noise cable) effectively minimizes mass loading. The
accelerometer is a self-generating device that requires no external
power source for operation.
The Model 1011A exhibits a broad frequency response range and
a high resonance frequency. It utilizes a piezoelectric crystal
material that exhibits stable output sensitivity over the operating
temperature range. Low-noise, flexible coaxial cables are used for
error-free operation.
VIP Sensors Signal Conditioner Models 5002 and 5005 are
recommended for use with this high impedance accelerometer
View Complete Details

MODEL 1012A

The VIP Sensors Model 1012A is a miniature piezoelectric
accelerometer for vibration and shock measurements. Its light
weight effectively minimizes mass loading. The accelerometer is
a self-generating device that requires no external power source
for operation.
The Model 1012A exhibits a broad frequency response range and
a high resonance frequency. It utilizes a piezoelectric crystal
material that exhibits stable output sensitivity over the operating
temperature range. Low-noise, flexible coaxial cables are used for
error-free operation.
VIP Sensors Signal Conditioner Models 5002 and 5005 are
recommended for use with this high impedance accelerometer.
View Complete Details

MODEL 1013A

The VIP Sensors Model 1013A is a stud mounted piezoelectric
accelerometer designed for general vibration measurement on
structures and objects. The sensor design is sealed against
external contamination. The accelerometer is a self-generating
device that requires no external power source for operation.
The Model 1013A exhibits high resonance frequency. Signal
ground is connected to the outer caseof the unit. When used with
an isolated mounting stud, the accelerometer is electrically
isolated from ground. The accelerometer features a 10-32 side
connector that is used with low-noise coaxial cable for error-free
operation.
VIP Sensors Signal Conditioner Models 5002 and 5005 are
recommended for use with this high impedance accelerometer.
View Complete Details

MODEL 1014A

The VIP Sensors Model 1014A is a stud mounted piezoelectric
accelerometer designed for general vibration measurement on
structures and objects. The sensor design is sealed against
external contamination. The accelerometer is a self-generating
device that requires no external power source for operation.
The Model 1014A exhibits high resonance frequency. Signal
ground is connected to the outer caseof the unit. When used with
an isolated mounting stud, the accelerometer is electrically
isolated from ground. The accelerometer features a 10-32 top
connector that is used with low-noise coaxial cable for error-free
operation.
VIP Sensors Signal Conditioner Models 5002 and 5005 are
recommended for use with this high impedance accelerometer.
View Complete Details

MODEL 1015A

The VIP Sensors Model 1015A is a small, stud mounted
piezoelectric accelerometer designed for general vibration
measurement on structures and objects. The sensor design is
sealed against external contamination. The accelerometer is a
self-generating device that requires no external power source for
operation.
The Model 1015A exhibits high resonance frequency. Signal
ground is connected to the outer caseof the unit. When used with
an isolated mounting stud, the accelerometer is electrically
isolated from ground. The accelerometer features a 10-32 top
connector that is used with low-noise coaxial cable for error-free
operation.
VIP Sensors Signal Conditioner Models 5002 and 5005 are
recommended for use with this high impedance accelerometer.
View Complete Details

MODEL 1017A

The VIP Sensors Model 1017A is a small piezoelectric
accelerometer for vibration measurement on small structures and
objects. Its light weight of 2.8 grams (without the low-noise
cable) effectively minimizes mass loading. The accelerometer is a
self-generating device that requires no external power source for
operation.
The Model 1017A exhibits a broad frequency response range and
a high resonance frequency. Low-noise, flexible coaxial cables
are used for error-free operation.
VIP Sensors Signal Conditioner Models 5002 and 5005 are
recommended for use with this high impedance accelerometer.
View Complete Details

MODEL 1021A

The VIP Sensors Model 1021A is a miniature piezoelectric
accelerometer designed for shock and vibration measurements
on small structures and objects. Its light weight minimizes or
eliminates any mass loading effects on the object being tested.
The accelerometer is a high-impedance, self-generating device
that requires no external power source for operation.
The Model 1021A incorporates a thru-hole mounting design
that allows for cable orientation in any direction. The unit is
sealed against external contamination. Signal ground is
connected to the outer case of the unit. The accelerometer
features a M3 connector that is used with low-noise coaxial
cable for connecting to signal conditioning electronics.
VIP Sensors Signal Conditioner Models 5002 and 5005 are
recommended for use with this high impedance accelerometer.
View Complete Details

MODEL 1021B

The VIP Sensors Model 1021B is a miniature piezoelectric
accelerometer designed for shock and vibration
measurements on small structures and objects. Its mass of
only 1.4 grams minimizes or eliminates any mass loading
effects on the object being tested. The accelerometer is a
high-impedance, self-generating device that requires no
external power source for operation.
The Model 1021B incorporates a thru-hole mounting design
that allows for cable orientation in any direction. The unit is
sealed against external contamination. Signal ground is
connected to the outer caseof the unit, but can be electrically
isolated from ground when used with an isolated mounting
bolt. The accelerometer features an integral cable with a 10-
32 plug for connecting to signal conditioning electronics.
VIP Sensors Signal Conditioner Models 5002 and 5005 are
recommended for use with this high impedance
accelerometer.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (VIP Sensors)
  • San Juan Capistrano, CA 92675 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/vip-sensors/sensors.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457624{main}( ).../index.php:0
20.01532015864include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.27972737984include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.28863673664header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice