Post Buy Requirement
VA
United States
Add Review

Other Products / Services

Inlet Caps

  • Series CFA Series, CL Series, CLR Series, CJ Series, CS Series
Improve the life of your filter element with Vortox Air Technology Inlet Caps
Vortox Air Technology, Inc. Inlet Caps are designed to lengthen the life of filter elements used in dry air cleaners and oil bath air cleaners by preventing debris such as leaves, chaff, moisture (rain and snow), and large particles of foreign matter from entering and damaging the filter.

All steel construction
Choice of materials used: Carbon Steel or T304 Stainless Steel
Black powder coat finish or #7 polished Stainless Steel
Corrosion resistant
Neat appearance
Universal design on most styles
Minimum intake of water
Maximum engine protection
All Vortox Air Technology, Inc. Inlet Caps perform in the harshest conditions.
View Complete Details

Breather Cap

  • Series DA Series, DB Series, DC Series
Vortox Air Technology, Inc. has a Breather Cap for your application, whether selected from our wide range of products or designed specifically for your needs.

Rugged and durable all steel construction
Resistance-welded joints
All DB & DC models are built using schedule 40 pipe fittings
Choice of materials used: Carbon Steel or Stainless Steel
Interior choice of polyurethane foam, woven galvanized steel mesh, or woven stainless steel mesh
Baked Polyester Powder Coat finish
All Vortox Air Technology, Inc. Breather Caps perform in the harshest environments.
Designed for Durability
Mining Oil Field Logging Marine Construction Lift Truck Hydraulic Reservoir Power Transmission Equipment
View Complete Details

Separators

  • Series GD Series, WD Series
Keep Liquids Separated with Vortox Air Technology Separators
Using the same principles founded in our line of Oil Bath Air Cleaners, Vortox Air Technology, Inc. Separators use coalescing media to filter oil and dirt out of air and water out of fuel.

Lined with Vortox Air Technology filter element
Filter element is self-washing and sustains the life of the product
Vertical mounting
Electro Galvanized coated cold rolled Carbon Steel consruction
Black baked polyester coat finish
GD and WD styles
Customization available upon request
Reliable Performance
Brake Systems Crankcase Ventilation Marine Diesel Engines Railroad Brake Lines
View Complete Details

In-The-Pipe Samplers

  • Diameter 18-24 inch
In-The-Pipe Samplers
Vortox Air Technologys In-the-Pipe Sampler uses a two ball valve assembly to collect a liquid sample. An upper ball is external to the system, which rests on an intake orifice and keeps the system sanitary until liquid causes the ball to float. As the ball floats, liquid enters he collection chamber at a rate that is governed by setting the intake adjusting screw. The lower ball will float and close off the intake flow by sealing the bottom of the orifice.
In-the-Pipe Sampler Options & Accessories
Expanding Band Assemblies All Stainless Steel, fits into selected diameter pipes (manholes or outfalls) and holds the In-the-Pipe Sampler in position. These bands will make with any of the Samplers listed below:
FSX24 Expanding band fits 18-24 inch diameter pipes

FSX30 Expanding band fits 24-30 inch diameter pipes


Samplers All Stainless Steel construction, polypropylene ball valves, nitrile ball valve gasket.

FS3A .80 gallon 3 liter capacity Sampler

FST3A Teflon lined .80 gallon 3 liter Sampler

FSTD3A Teflon lined .80 gallon 3 liter Sampler with inflatable dam*.
View Complete Details

Tuthill Blower

  • Series T650
Tuthill T650 Blower
Vortox Air Technology, Inc. is pleased to offer the AWA11X17A4 model Truck Blower Air Cleaner. Engineered and designed specifically for use on the Tuthill T650 Blower, the AWA11X17A4 measures 11x17x7 in height and features an oval inlet tube which accepts a 4 rubber hose. Its flat box shape creates a flanged outlet which bolts directly to the blower inlet and eliminates any need for mounting accessories. The T650 Blower Air Cleaner is constructed entirely of 16 and 18 gauge Carbon Steel and finished in black powder coat paint. The T650 Truck Blower Air Cleaner allows for easy servicing and filter access by releasing the six clamps which secure the flat panel filter element inside the air cleaner. The Air Cleaner uses Vortox Air Technology filter element VFP11X17.
View Complete Details

Plenums

Plenums
Plenums are used with the same type of equipment, often mixers, as Alternate Fuel Air Cleaners, but are needed where remote mounting is required. Plenums are placed (hard mounted) over the mixer allowing a hose to connect from the Plenum to an air cleaner. All Vortox Air Technology, Inc. Plenums are formed with Electro Galvanized cold rolled Carbon Steel and are finished in a black baked polyester coating. Customization is welcome to create a Plenum that will suit your needs.
View Complete Details

Tubing

  • Dimensional Range 5″dia. x 20″ length (127x508mm)
Tubing
T304 Stainless Steel
18 gauge
Standard size: 5dia. x 20 length (127x508mm)
Ask about custom lengths and diameters
Same weight per inch as Aluminum
Great for food grade transport
View Complete Details

Air Intake Elbow

  • Country of Origin India
  • Size 14x14inch, 15x15inch, 16x16inch
  • Type Air Inlet Louver
  • Shape Round
  • Application Industrial Use
  • Temperature -40˚F to +300˚F duty.

Elbows Description 90 EPD, air intake elbow complies with the increased expectations of modern truck blowers that require higher vacuum intake pressure. Made specifically for Vortox Air Technology, Inc. Truck Blower Air Cleaner applications. Feature Benefits Vacuum collapse rating (PNs 22549 & 22550) meets 17 Hg. Mercury for most blower applications. Recommended for temperatures -40F to +300F duty. Low Temp. Brittleness, D2137, Method A; Non-Brittle after 3 minutes at -40C. 80 Shore A hardness +5-5 1015 PSI Tensile, minimum Elongation: 200%

View Complete Details

Liquid Samplers

  • DEPTH 16″
Liquid Samplers
The Vortox Air Technology Liquid Sampler is a precision instrument manufactured of Stainless Steel, easy to install, use, and maintain. Liquid Samplers are primarily used to capture grab andor composite (time weighted, continuous collection) samples. The Sampler is available in standard 316L Stainless Steel or Teflon coated 316L Stainless Steel on the internal surfaces of the Sampler where the effluent is captured.

The Liquid Sampler can be suspended by Stainless Steel cables underneath existing grates with a drop box depth approximately 16 or the Sampler has its own sump assembly and traffic rated grate for any below grade in the ground installation.

Installation of the Liquid Sampler will vary in many cases. Actual locations of sample collection sites must be confirmed by the permitting agency. However, typical installations include: Sampler, Sump and Grate set in the ground, the Sampler suspended in the existing Sump by optional Eye Bolts and Cables (.80 gallon only), or the Sampler and Sump installed in core drilled bottom of existing Sump.
View Complete Details

Precleaners

Precleaners
Used most often in extremely dusty environments such as the mining, desert, and logging industries, Precleaners help to reduce the dust load and extend periods between servicing by lengthening the life of filter elements. Precleaners attach to an air cleaners inlet tube and act as a centrifugal type air cleaner by removing the large particles and greater portion of dust from the air cleaners intake air. Vortox Air Technologys Precleaners feature no gaskets or air seals, which can be broken, and always provide the maximum dust removal efficiency. All Vortox Air Technology Precleaners are entirely fabricated of Carbon Steel and finished with a baked polyester coat to maintain peak performance and durability for years.
View Complete Details

Reinforced Head

Introducing the all new Reinforced Head with Formed Ribbing
by Vortox Air Technology
Benefits of the Reinforced Head
Ribbing surrounds the Camlock connection the point of stress

Formed ribbing creates increased reinforcement

Reinforces the air cleaner to minimize the potential of fatigue

Produces less deflection

Decreases less metal fatigue

Internal Locator Tube is also reinforced with matching ribbing

Made of 18 gauge T304 Stainless Steel

Resistance welded joints

Finished in the same bright buff as Vortox Air Technology Stainless Steel Air Cleaners
View Complete Details

Hump Hoses

  • Dimensional Range 5″x5″ (127x127mm)or 5″x4″ (127×101.6mm)
Hump Hoses
2 Hump Hoses; your choice of 5x5 (127x127mm)or 5x4 (127101.6mm)
High quality EPDM material
Successfully tested to 17 (Hg) Mercury vacuum
View Complete Details

Sump Assembly Lid

  • Series FSL8-Use with Sump Assembly FSS8A, FSL10-Use with Sump Assembly FSS10
Sump Assembly Lid Cover
Stainless Steel , aids in keeping Sump free from debris (not water tight) when Sampler is not in place.
FSL8-Use with Sump Assembly FSS8A
FSL10-Use with Sump Assembly FSS10
View Complete Details

Sump Assemblies

  • Series FS10A & FST10A
Sump Assemblies
Stainless Steel completely sealed.
FSS8A Use with Storm Water Samplers FS8A & FST8A
FSS10 Use with Storm Water Samplers FS10A & FST10A
View Complete Details

Bottom Outlet

  • Series AP120J4
The AP120J4 is a multi-stage, pressure only air cleaner primarily used in conjunction with Garner DenverDrum 450 blower applications, both truck mounted and stationary. The AP120J4 air cleaner has an integrated inlet design that requires no additional accessories. The 4 OD outlet tube is well suited for applications up to 400 CFM.

For mounting, use Vortox Air Technology BB120G Band Brackets. This Band Bracket is designed with a deep bracket to allow the inlet assembly ample side clearance from the frame rails.

Vortox Air Technology Truck Blower Air Cleaners
Constructed of 16 and 20 gauge Electro Galvanized Steel and finished with a durable polyester powder coat paint, the AP120J4 will provide years of service for many applications. The outer housing is constructed using Deep Draw Technology which ensures a seamless, one-piece construction of the body and head components.
View Complete Details

Dipstick Breather Caps

  • Series “6239”
Vortox Air Technology, Inc. Breather Caps with attached dipsticks are used to indicate various fluid levels in oil reservoirs. They are primarily constructed to the slip-on style of our DA series Breather Cap, but have the flexibility to utilize any size or length of stamped steel indicator attached to the main body. The indicators have the option of wording or offsets stamped to any location on the surface.

Fluid level indicator breather caps can also be fabricated in DB or DC styles with male or female pipe threads.

Below is a list of Dipstick Breather Cap configurations that Vortox Air Technology, Inc. currently offers. The 6239 series is constructed to simply attach any size dipstick to a common Breather Cap, which allows you to create and customize Breather Caps with dipsticks to comply with your specific needs.
Q
View Complete Details

Vortox Saddle Bracket

  • Diameter 5″-13.5″
BA Saddle Brackets originated the Band and Saddle Bracket line. Originally designed to mount our G style oil wash air cleaners, the BA Saddle Brackets mount securely and snugly to any unit with four mounting bolts located on two adjustable legs, which offer custom fitting. Current models range from 5-13.5 in diameter. Customization is available upon request.

The Vortox Saddle Bracket
Vortx Air Technology, Inc. Band and Saddle Brackets are designed to efficiently and securely hold your application in place. Built entirely with heavy gauge steel, our Band and Saddle Brackets have the ability to support any application and stand the test of time. Customers have the option of choosing Carbon steel or T304 Stainless Steel for construction material. Finishes available in painted black powder coat or polished Stainless Steel. Sizes currently offered range from 5 to 18. We welcome customization in band diameter and width (thickness), placement of mounting pilot holes and slots, and placement of band closure to avoid mounting difficulties due to obstructions.
View Complete Details

Vortox Band Bracket

  • MODEL RANGE 5″-18″
BB Band Brackets are a completely solid unit of steel welded together and designed for a universal fit. Two mounting holes allows mounting directly to any surface. Current models range from 5-18, but variations can be created upon request. Further customization capabilities include: band width and metal gauge thickness for added strength and support, placement of mounting holes, and placement of band closure.

The Vortox Band Bracket
Vortox Air Technology, Inc. Band and Saddle Brackets are designed to efficiently and securely hold your application in place. Built entirely with heavy gauge steel, our Band and Saddle Brackets have the ability to support any application and stand the test of time. Customers have the option of choosing Carbon Steel or T304 Stainless Steel for construction material. Finishes available in painted black powder coat or polished Stainless Steel. Sizes currently offered range from 5 to 18. We welcome customization in band diametere and width (thickness), placement of mounting pilot holes and slots, and placement of band closure to avoid mounting difficulties due to obstructions.
View Complete Details

Marine Filters

  • Color Black
Marine FiltersSilencers
Vortox Air Technology Marine Air Cleaners are designed to keep engines clean and free of debris in moist environments such as boats and ships where continuous exposure to dust is not a concern. The Marine Air Cleaner filters out debris from the shoreline and deck, protects the engine from anything that could be potentially consumed, and acts as a silencer by reducing engine noise. Vortox Air Technology Marine filter elements are filled with a wire media that is made from either Monel or T304 Stainless Steel coiled wire. This filter will not rust and is completely washable. All Vortox Air Technology Marine Air Cleaners are built with durable Electro Galvanized Carbon Steel and finished with a baked polyester coating.
View Complete Details

Grate Assemblies

  • Series FSG10A , FSG10B, : FSS10
Grate Assemblies
Traffic rates FSG8A amd FSG10A. Non-traffic rated FSG10B. Cast Iron secured with Allen head screws.
FSG8A: Use with Sump Assembly FSS8A
FSG10A & FSG10B: Use with Sump Assembly FSS10

grate copy
View Complete Details

Teflon Coating

  • Series FST8A
Teflon Coating
(Optional) Applied to the inner surface of the sample collector and shaft portion of the center port valve assembly. Teflon Coating is designated by the letter T as the third alpha character in the Sampler part number (Ex:FST8A).
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Vortox Air Technology, Inc.)
  • Claremont, CA 91711 map, United States
  • Share us via