Our Products #4946412

Designed for installation in coffee urns, steam tables and other shallow containers. These heaters are of two coil construction suitable for a 3-heat control switch. They are made to pass through a 3-58" diameter hole when the outlet box is removed. The heater element is installed in a 2-716" diameter hole in the bottom of the vessel or container. The heater is copper sheathed and has a 4" outlet box with locknut and gasket. UL listed and available in Titanium.

This option leaves the complete area under the melting pot clearance for molds placement and filling by supporting the pot 12" above the bolted down base plate.

Used for impregnating and production melting plastic coatings, waxes, wax like compounds, and glue. Operates on AC only at temperatures of 150 degree - 550 degree F; Sizes range from 1 pint to 25 gallons for those with aluminum crucibles and from 10 gallons to 100 gallons for those with steel crucibles. Standard Features: Cast aluminum, welded aluminum or welded steel crucibles. Mounted on an air cooled base. Thermostatic control eliminates carbonization. Versatile. Replaceable heating elements always in stock. Controls-bimetal or hydraulic type automatic thermostats. Models up to and including 1600 Watts are furnished with a 6-foot, 3-conductor grounded cordset. Stainless steel also available - call for custom quote.

Waage single and double hotplates are designed for heavy duty laboratory and industrial use. Standard models have stainless steel tops with heavy gage steel frames finished in textured enamel. These units are controlled by an infinite switch. The heating elements are swaged tubular units that can be easily raised for cleaning. These units are also available in all stainless steel construction. FEATURES: Durable and safe. Heavy duty tubular heating elements. Easily maintained - replaceable heating elements and switches. The Waage hot plate equipped with infatrol offers the operator an infinite number of settings. From 10 to 100% of the rated wattage. This control, working on a variable on-off cycle, permits a wide range of temperature settings. All models are equipped with a grounded 6 foot cord and plug.

Maximum Temperature: 750 F - 1250 degrees F; 115-230V. Designed for use in dies, platens, forming tools or wherever a hole can be drilled to supply concentrated heat efficiently. CONSTRUCTION: A coiled nickel-chromium resistance wire is supported on refractory bodies and packed with refractory material to conduct heat to the sheath. Standard units come with 10" asbestos leads covered with woven glass. INSTALLATION: Drill hole through the object being heated wherever possible to facilitate removal for replacement or exchange. SPECIAL FEATURES AND PRICES ON REQUEST: Special length leads. Right angle elbow and moisture proof greenfield. Sealed ends. Reinforced leads. Minimum order charge: $20.00 net. High Watt Density Cartridge Heaters available on request.

Safe And Efficient. Bent Riser Waage Flash Immersion Heaters are designed for quick immersion "over-the-side" of tanks or vessels. They are portable and ideally suited for applications where it is impractical to install immersion heaters through the sides of tanks. These heaters are used in laboratories, industrial plants, institutions, barber shops, beauty salons, and in the home. Their use for sterilizing and heating liquids to a boil is more efficient than other methods because they make direct contact with the liquid rather than first having to heat a vessel or container. Following are some typical applications which demonstrate the many varied uses of Portable Waage Flash Immersion Heaters: In the sick room for sterilizing, vaporizing the atmosphere and other purposes. By Travelers -- to cook with, provide hot water for personal cleanliness, etc. In the barber shop for sterilizing combs, razors, scissors. In the meat packing business for dipping knives to increase the meat cutter's efficiency. In the office to boil that pot of water for the coffee break. Equipped with 3-Conductor Grounded Cords.

Capacities range from 1 gallon to 100 gallons. Custom units to 750 gallons. Most Pots listed are also available in 60-250 degrees F. operating temperature ranges for lower temp. waxes and glue. Has manual reset hi-limit thermostat H2-550 for product safety. Accessory Equipment (upon request): Needle valves can be installed in these pots to dispense uniform quantities of material for production requirements; WP8A thru WP80A. Quick-opening, heated ball valves are available in 12", 34", 1", 1-12" (12" ball valve is the maximum for WP8A model). 12" legs standard, 16" optional. Models WP28A and larger available in 440V, 3 Phase. WP1AL thru WP8AL models for melting glue and low melting wax 60 -250 degrees F. Manual reset hi-limit thermostat on all models above 2 gallon.100 gallon, Equipped with a quick-opening, heated ball valve and mounted on pipe legs, these Waage series AWP agitated dispensing tanks are the standard WP models with the addition of 30 RPM motor-driven stirrer.

Designed and equipped to accommodate shapes that cannot be handled in a round style pot. Volume capacity ranges are from 32 Cubic inches to 864 Cubic inches with temperature ranging from 150 to 550 degrees F. RWP-1 and RWP-2 use a bimetal thermostat and all others use a hydraulic thermostat. Most tanks are also available in 60-250 degrees F. operating temperature ranges for lower temperature waxes and glue.

Used for melting lead free babbitt, solder, lead, tin, zinc, pewter, babbittt and other metals with melting points below 1000 degrees F. These units are engineered for durability and longevity, plus they are easy to service. Standard Features: heavy cast iron crucibles and plate fabricated custom sizes, replaceable elements for easy field service always in stock, ceramic and glass insulation to minimize heat loss. The adjustable digital temperature control with thermocouple mounted in a titanium sleeve for protection.