Post Buy Requirement
WI
United States
Add Review

Our Products

  1. Pollution Control Machines 4 Products available
  2. Valves & Valve Fittings 5 Products available
  3. Industrial Valves 15 Products available
  4. 4 Products available
  5. Belt Conveyors 3 Products available
  6. Filters 4 Products available
  7. Screw Conveyors 7 Products available
  8. Material Handling Machines & Systems 10 Products available
  9. Others 48 Products available

Other Products / Services

Silo Safety System - KCS

The KCS Silo Safety System for the safeguarding of silos consists of a central electronic monitoring and control panel which manages a series of silos and a component kit including, in the basic version, one power panel for each silo, a silo pipe connection, a pinch valve, a tanker coupling to the filling pipe, a maximum level indicator, a differential pressure switch or electronic pressure meter, a pressure gauge for the venting filter, a pressure relief valve, and an audible alarm.
View Complete Details

Compact Plants For Mechanical Effluent Pre-treatment

  • Inlet screen mesh 0.5 ~ 10 mm
The WASTEMASTER TSF23 Combined Pre-Treatment Plant consists of a screw screen, a decanting tank, a sandgrit extracting screw and a grease scraper.
Sewage from civil or industrial waste water treatment plants has to be pre-treated before being transferred to any kind of purification system. The WASTEMASTER TSF carries out different processes: de-watering and compacting of screened solid waste, separation of sandgrit and removal of floating, greasy matter.
View Complete Details

Live Bin Bottoms

MU Live Bin Bottoms (Multiple Screw Feeders) are equipped with a modular trough which encloses up to 6 shafted helicoid flight or paddle screws, externally flanged, fully protected end bearing assemblies complete with manually adjustable packing gland and shaft seal, a rectangular outlet spout covering the entire width of the bin bottom, bolted end plates, splined shaft couplings for medium heavy-duty, and flanged shaft couplings for the heavy-duty version.
View Complete Details

Hand Wheel Actuators

CMV-type Hand Wheel Actuators are suitable for opening and closing VG-type Slide Valves.
CM actuators come with splined shaft coupling bush according to DIN 5482.
View Complete Details

Manual Lever Actuators

CM-type are manually operated lever actuators suitable for the opening and closing of WAM Butterfly Valves, as well as WAM VSS-type Ball Segment Valves, as well as WAM DVA-type Diverter Flap Valves.
CM Actuators come with splined shaft coupling bush according to DIN 5482.
View Complete Details

Gear Motor Actuator

AE-type Electric Gear Motor Actuators are suitable for 90 opening and closing of WAM Butterfly Valves and VSS-type Ball Segment Valves.

AE actuators come with splined shaft coupling bushes according to DIN 5482 standards.
Swivel action makes limit switches (MIC 23 or LSM 0) obligatory.
View Complete Details

Screw Screens

WASTEMASTER GCP Screw Screens consist of a screen basket, a conveyor screw and a compacting section. The GCE-type is almost identical with the GCP but misses the compacting section. WASTEMASTER GCP Screw Screens are suitable for applications in which screenings may not or cannot be compacted. GCP is designed for combined action of separating of solids present in the effluent and compacting and dewatering of screened solids.
View Complete Details

Vertical Screw Screens

  • Throughput rates: 130 ~ 250 m³/h (76 ~ 147 cfm)
WASTEMASTER GCV is a Vertical Screw Screen designed for operation in plants with minimum space available. WASTEMASTER GCV Vertical Screw Screen carry out solids-liquid separation with great efficiency by dewatering and compacting the effluent in a special discharge module.
View Complete Details

Piping Screw Screens

WASTEMASTER GCPC is a Screw Screen that consists of a screen basket, a conveyor screw, and a compacting section. WASTEMASTER GCEC is almost identical with GCPC but misses the compacting section. It is suitable for applications in which screenings may not or cannot be compacted. Both machines are installed in a self-supporting container.
View Complete Details

Mini Screw Screens

  • sizes (2 or 5mm)
The inclined WASTEMASTER CT Mini-Screw Screen, which consists of a tubular screen equipped with a screw in SINT engineering polymer, is suitable for small flow rates in pit application.
View Complete Details

Septage Receiving Stations

WASTEMASTER TSB1 carries out two different processes: separation of solids present in the effluent, as well as compacting and de-watering of separated solids. Sewage from septic tanks interceptors or industrial plants collected by special purge tankers, has to be pre-treated before being introduced into any kind of purification system. Suspended solids are retained by the screen increasing the level of liquid in the front part of the screen. At this point the screw starts operating, cleaning the screen by means of brushes fixed on the outer part of the screw flight, removing the material, then de-watering and compacting it.
View Complete Details

Combined Septage Receiving Stations

  • Inlet screen mesh 5, 6, 7 mm
The WASTEMASTER TSB 23 carries out up to three different processes: de-watering and compacting of screened solid waste, separation of sand and removal of floating, greasy matter.
View Complete Details

Screw Compactors

WASTECOM CPS Screw Compactors consist of a conveyor trough manufactured from stainless steel, a shaftless extra heavy-duty spiral manufactured from carbon steel, a compacting and de-watering discharge module, a return duct for pressed out water, and a drive unit suitable for the application.
View Complete Details

Aggregate Reclaimers

  • Drive power 5.5 kW (7.5 HP) 220-240/380-420 V, 50 Hz; 440-480 V, 60 Hz
The CONSEP 5000 is an innovative Aggregate Reclaimer used in ready-mixed concrete batching plants for reclaiming concrete washed out from truck mixers, as well as in pre-cast concrete batching plants for the recovery of concrete from the moulds.
The CONSEP 5000 is manufactured from galvanized carbon steel. It is made up of a U-shape trough and a large inlet batch hopper, both lined with wear-resistant SINT engineering polymer. The CONSEP 5000 comes with a wide outlet spout, a ribbon screw with individually replaceable segments coated with wear-resistant SINT engineering polymer, a bolted trough cover grid, and a robust gear motor which suits the application.
View Complete Details

Manual Bag Openers

  • Material carbon steel
The RSM Manual Bag Opener consists of a grille with a rest fitted on its front. The grille is mounted on top of a hopper which is supported by four feet. A fabricated hood with protection door fitted on its front covers the hopper and grille. RSM Bag Openers are manufactured from high-finish-grade materials and come with or without integrated de-dusting filter unit. In the version with integrated dust filter the filter elements are pneumatically cleaned by reverse air jet.
View Complete Details

FIBC Dischargers

  • Material carbon steel, 304L / 316L stainless steel
SBB-type FIBC Dischargers consist of a steel frame complete with a material discharge hopper and an upper mobile cross bar for lifting of the filled up bag into the Discharger by forklift truck.
View Complete Details

FIBC Filling Systems

  • Material carbon steel, 304L / 316L stainless steel
RBB-type FIBC Filling Stations consist of a steel frame and a bag filling unit including an inflatable seal that impedes dust leakage during filling.
View Complete Details

Polygonally Shaped Dust Collector

  • Air volume 250 ~ 1, 500 m³/h (147 ~ 880 cfm)
WAMAIR Vacuum is a polygonally shaped Dust Collector for negative pressure pneumatic conveying applications. Filtering elements are inserted horizontally or vertically while a compressed air cleaning system is integrated in the access door.
View Complete Details

EASYFILL - FIBC Filling Systems

EASYFILL is a specialised FIBC Filling Station for cost saving collection of dust for disposal. EASYFILL can collect simultaneously dust from up to 4 filters equipped with a RECOFIL Recovery System.
EASYFILL consists of a steel frame and a bulk bag filling unit including a semi-automatic system for bag sealing which prevents dust leakage during filling.
View Complete Details

Continuous Level Measurement System

ILS is a Continuous Level Measurement System for all kinds of powdery or granular material stored in silos or containers.
View Complete Details

Micro-Feed Screws

The SPL Micro-Feed Screw is an auxiliary screw combined with a larger main screw feeder of the TU, TP or CA-type. SPL are mounted beneath the main screw feeder in the outlet section.
View Complete Details

Vertical Screw Conveyors

SVE is a The SVE is a Vertical Screw Conveyor system in which a vertical screw conveyor is fed by a horizontal screw feeder.
View Complete Details

Vertical Screw Conveyors

The Horizontal Screw Feeder feeding material from a silo or hopper or conveying it fed by an upstream feeding device, consists of a U-shaped or tubular carbon steel trough with appropriate surface finishing. The outlet zone of the horizontal screw feeder consists of a short tubular section tangentially flanged at a right angle on the bottom section of the Vertical Screw Conveyor. A flange is welded at each end of the Horizontal Screw Feeder. The trough or tube contains a rotating screw with coupling bushes at each end connected with the shafts of the two end bearing assemblies. The Horizontal Screw Feeder is equipped with one or more intermediate hanger bearings should its overall length require them. Furthermore, the Horizontal Screw Feeder is equipped with a drive unit suitable for the application.
View Complete Details

Bulk Biomass Digester Feeding System

The BFS Screw Feeder receives the material from the mixerhopper and transfers it to the BVS Vertical Screw Conveyor. The BFS Screw Feeder is a discharging equipment provided with optional inlet spouts which are pre-engineered to suit the most commonly used mixers on the market.

The BVS Vertical Screw Conveyor receives the material from the BFS Screw Feeder through a tangential or frontal discharge port. The BVS Vertical Screw Conveyor lifts the biomass to an appropriate height where it feeds it into the BIS Injector Screw.
View Complete Details

EC-type Bucket Elevators

EC-type Bucket Elevators are specialised for vertical elevation of cereals and similar materials. Designed for the application in areas subject to the European Explosion Protection Directive, ATEX, these Bucket Elevators are manufactured from hot galvanized carbon steel. The machines consist of a head and a foot section which include solidly mounted roller bearings as support for the bucket carrier belt, an intermediate trunking section for bucket assembly and inspection, along with all the other intermediate casings. The particular belt and bucket design and materials offer high conveying efficiency. The use of antistatic, oil-repellent, self-extinguishing belts, along with buckets manufactured from high-density polyethylene (HDPE), as well as the presence of anti-skid belt sensors, as well as rotation and control sensors provide highly efficient state-of-the-art performance in compliance with the relevant standards.
View Complete Details

EI-type Bucket Elevators

EI-type Bucket Elevators are specialised for vertical elevation of fine aggregates and minerals. They are designed to operate at low speed and are manufactured from hot-galvanized carbon steel. The machines consist of a head and a foot section which include solidly mounted roller bearings as support for the bucket carrier belt, a variable number of trunkings, an intermediate trunking section for bucket assembly and inspection, along with all the other intermediate casings. The particular design of the buckets manufactured from abrasion-resistant Nylon PA6, or mild steel, offers extended durability versus abrasive materials handled.
View Complete Details

Piston Type Pneumatic Actuators

  • Operating pressure 2 ~ 8 bar (29 ~ 116 PSI).
CP Pneumatic Actuators are suitable for 90-degree opening and closing of WAM Butterfly Valves, WAM VSS-type Ball Segment Valves, as well as WAM DVA-type Diverter Flap Valves.
CP actuators come with splined shaft coupling bush according to DIN 5482
Operating pressure amounts to 2 8 bar (29 116 PSI).
View Complete Details

Electric Gear Motor Actuators

AR-type Electric Actuators are gear motor drives suitable for opening and closing VG-type Slide Valves.
AR actuators come with a splined shaft coupling bush according to DIN 5482.
View Complete Details

Electric Gear Motor Actuators - CRG

CRG-type Electric Gear Motor Actuators are suitable for opening and closing VLQ, VLC, VLR and VDI-type Slide Valves.
LSM 6-type limit switches are mandatory for the opening and closing of the Slide Valves.
ATEX-versions are available on request.
View Complete Details

Rotary Drum Screens

WASTEMASTER FTR is a rotating drum screen designed to combine separation of solids present in the effluent with compacting and de-watering of screenings thus obtained. WASTEMASTER FTR consists of a rotating drum screen basket, a conveyor screw (with self-cleaning SINT drainage liner) and, as an option, a compacting module. WASTEMASTER FTR is a space-saving machine that combines multiple functions in one unit only:
View Complete Details

Fluid Dynamic Grit Classifiers

  • Particle Size ≥ 200 μm
GRITSEP FGC is an innovative Sand and Grit Classifier designed using the most advanced simulation software. The GRITSEP FGC Fluid Dynamic Grit Classifier is the most compact, economical solution engineered for easy on-site assembly. Storage, transportation and maintenance costs are reduced to the minimum. GRITSEP FGC consists of a decanting tank, a grit and sand extracting screw and support stands.
View Complete Details

GRITSEP DS - Grit Classifiers

  • Liquid throughput: 5 ~ 36 m3/h (3 ~ 21 cfm)
  • Solids throughput: : 0.06 ~ 0.36 dm3/s (0.1 ~ 0.7 cfm)
GRITSEP DS Grit Classifiers consist of an inclined screw conveyor with a large volume loading and sedimentation hopper including a water inlet and outlet spout, a shaftless screw housed in a trough, a low-friction anti-wear trough liner, a trough cover, an outlet spout for solid particles, and a drive unit mounted at the outlet end.
View Complete Details

Mechanical Effluent Pre-treatment Plant

WASTEMASTER TSF1 is a combined system for separation of solids present in effluents, as well as compacting and de-watering of the extracted solids. It is designed to be fed by a pump or by gravity. Suspended solids are retained by a screen which increases the liquid level in the front part of the screen. After a certain liquid level has been reached the screw starts operating, cleaning the screen by means of brushes fixed on the outer part of the spiral, thus removing solid material, subsequently de-watering and compacting it.
View Complete Details

Solid-Liquid Screw Press Separators

The SEPCOM 0150V is a solids-liquid screw press separator.
The machine consists of:
- an inlet module
- a separation and conveying module
- a compacting module
The feeding section is provided with a compensator tank and overflow outlet. It is designed to enable the material to directly flow into the separation module. The inlet is positioned at the bottom side of the machine.
The separation and conveying section consists of two vertical contra-rotating conveyor screws inside a screen which lets the liquid phase pass while the conveyor screws lift the solid phase up into the compacting module.
The compacting module consists of a counter-pressure diaphragm that compacts the solid material which is then discharged through two special chutes.
View Complete Details

Solids-Liquid Screw Separator Press

The SEPCOM Horizontal Screw Press Separator consists of a feeding section provided with a compensator tank and overflow hopper. The stainless steel casing includes a screw conveyor and a cylindrical screen basket that conveys and separates the solids from the liquid phase flowing through the screen, while the solid fraction is pushed towards the counter-pressure diaphragm outlet where a material plug forms. This enables automatic operation of the separator preventing the liquid phase from flushing through.
View Complete Details

Solids-Liquid Screw Press Separators

The separator consists of a feeding section provided with compensator tank and overflow hopper. The stainless steel casing includes a conveyor screw (inside a cylindrical screen basket) for material transport towards the outlet. The screen provides the separation of the solid from the liquid phase flowing through by pushing the solids towards the outlet where two counter-pressure diaphragms generate a material plug. This allows automatic operation of the separator and avoids flushing through of the liquid phase.
View Complete Details

Submersible Agitators

  • Drive power: 1.5 – 7.5 kW
WSA-type Submersible Agitators consist of an electric motor fitted to a propeller. They are designed and manufactured to keep medium-low density liquid suspensions blended.
The agitators consist of the following components:
Cast iron motor casing with waterproof enclosure for direct immersion
Waterproof electric motor
Electric cable for mains supply
Propeller
View Complete Details

Submersible Chopper Pumps

  • Troughput rate 90 l/s - 324 m3/h max.
  • Outlet size: DN80 - DN100
WSP-type Submersible Chopper Pumps consist of an electric motor fitted to a pump impeller and a chopping blade. These pumps are desgned and manufactured to convey water, waste water and liquids containing solid lumps or fibres.
The pumps consist of the following components:
- Outer steel shell with waterproof structure enabling immersion into the liquid to be sucked
- Encapsulated, waterproof three-phase electric motor
- Electric cable for mains supply
- Chopper blade
Tangential coupling for discharge pipeThese electric pumps are suitable for use with dirty water, waste water or sewage.
View Complete Details

Hydrodynamic Screws

Naturally downward flowing water starts the Hydrodynamic Screw which transforms hydropower into electric energy.
Hydrodynamic Screws exploit waterfalls of limited height and moderate flow rates ensuring an efficiency that cannot be matched by any other type of turbine.
View Complete Details

Automatic Bag Splitters

  • Material carbon steel, 304L / 316L stainless steel
The RSA Automatic Bag Splitter is made up of a splitting unit which consists of a trough that encloses an extra heavy-duty splitting screw, complete with an appropriate gear motor and a screening unit that consists of a horizontal, cylindrically shaped rotating screen, complete with drive unit. On top of the screening unit a suitable fan-operated dust collector can be integrated. Alternatively the RSA is supplied with connecting spigots for a central de-dusting unit.
View Complete Details

Pneumatic Conveying System

  • Weight 16 kg (35.3 lb)
  • Diameter 440 mm (17.3 in)
  • Height 410 mm (16.1 in)
  • Temperature -20 / 60 °C (-4 / 140 °F)
RECOFIL is an economic, pneumatic dust recovery device which has been specially developed for installation beneath filter hoppers.
View Complete Details

Pipe Couplings

  • Operating temperature -40 ~ 110 °C (-40 ~ 230 °F)
  • Operating pressure min. -0.5 bar / max. 7 bar (min. -7.2 PSI / max. 102 PSI)
GT Pipe Couplings consist of two cast iron semi-casings with heavy-duty jaws set into the casing halves to secure the pipes together in a safe, quick and rigid way.
The two semi-casings are joined together by strong bolts and nuts positioned on the two ends.
Sealing is ensured by gaskets made from EPDM or food-grade SILICONE.
View Complete Details

Wide Radius Anti-Wear Pipe Elbows

EXTRACURVE are highly elastic, wide radius Pipe Elbows which are inserted as a link in pneumatic conveying ducts. They are manufactured from a one-piece SINT engineering polymer cast with a helicoid spring core. Their great flexibility and excellent resistance to wear result in double durability as the Elbow can be simply mounted in reverse position as soon as it shows any sign of wear.
View Complete Details

Anti-Wear Pipe Elbows

EXTRABEND are short radius Pipe Elbows that are inserted as a link in pneumatic conveying ducts. They are manufactured from a one-piece SINT engineering polymer cast. Their special geometry enables diversion of the material flow at minimum wear due to a dead zone at the point of diversion.
View Complete Details

Bin Level Indicators

ILT-type Bin Level Indicators are designed for electric signalling by rotary action of minimum or maximum material level inside bins, hoppers or silos.
View Complete Details

Bin Level Indicators - ILV

ILV-type Bin Level Indicators are designed for electric signalling by fork vibration of minimum or maximum material level inside bins, hoppers or silos.
View Complete Details

Pressure Switch - IPM

  • Operating temperature: -30 ~ 80 °C (-22 ~ 176 °F)
  • Pre-set activating pressure: 0.02 ~ 0.04 bar (0.3 / 0.6 psi)
The IPM-type Pressure Switch consists of a self-cleaning wear and temperature-resistant membrane, a casing manufactured from aluminium alloy, a contact switch and assembly fittings (bolts and gasket).
View Complete Details

Electronic Pressure Meters - IPE

  • Operating temperature: -30 ~ 80 °C (- 22 ~ 176 °F)
  • Cable size: 2 x 1.5 mm² (2 x 0.002 sq in)
The IPE-type Electronic Pressure Meter consists of a self-cleaning wear and temperature-resistant membrane, a casing manufactured from aluminium alloy, an electronic card and assembly fittings (bolts and gasket).
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Sri Gudipati (WAM Inc)
  • 1300 Triad Blvd., United States
  • Share us via