Post Buy Requirement
WA
United States
Add Review

Other Products / Services

High-Temperature Heaters

The advanced design of the MULTICELL insertion heater from Watlow offers three major advantages: extreme process temperature capability, independent zone control for precise temperature uniformity and loose fit design for easy insertion and removal.

Performance Capabilities
Engineered to achieve sheath temperatures up to 2050F (1120C)
Up to eight independently controllable zones
View Complete Details

Specialty Heaters

  • Shape Square
  • Voltage 240 VAC
  • Watts 967 W
The ULTRAMIC heaters from Watlow are designed for thermal applications where the high performance of an advanced ceramic heater is required to ensure optimal effectiveness of the equipment and process.

ULTRAMIC heaters are constructed of aluminum nitride (AIN) and incorporate a thermally matched proprietary heating element that provides maximum performance in challenging applications. AIN is especially suitable for applications requiring a clean, non-contaminating heat source. Additionally, the excellent geometric stability ensures consistent part-to-part thermal contact during heating cycles.

Watlow AIN heaters can operate up to 400C (752F) with an ultra-fast ramp rate of up to 150C (270F) per second depending on the .
View Complete Details

Heating Clamp

The MI strip heater is a thin, responsive heater setting unmatched standards for performance and durability. It makes use of the most advanced heater construction techniques, including embedding a nickel-chromium element wire in an exclusive mineral insulation. Watlows exclusive mineral insulation is a material with a much higher thermal conductivity than the mica and hard ceramic insulators used in conventional heaters. This thin layer of insulation brings the element wire closer to the heater sheath, resulting in easy heat flow from the element wire to the sheath. This allows the wire to run cooler than conventional heaters and increases heater life.
View Complete Details

Radiant Heaters

The diverse RAYMAX radiant panel heater product line from Watlow allows for customers to solve virtually any application requiring radiant heat.

Watlows capabilities cover a wide range of needs, from contamination-resistant surfaces to fast responding high-temperature panels.

Applying radiant heaters can be complicated. However, Watlows engineering staff has the level of training and expertise required to meet most application requirements. Providing a high degree of technical support such as conducting application testing at Watlows facility, calculating the watt density and temperature requirements and recommending system components such as sensors and controllers.
View Complete Details

Adjustable Thermostats

Watlow offers several styles of sensors for use with flexible heaters. These sensors are available as preset or adjustable thermostats, thermocouples, thermistors, RTDs or thermal fuses. They can be integrally mounted (encapsulated in silicone rubber) to sense the temperature of either the part or the heater sheath. The thermostats can also be ordered separate from the heater, allowing direct control of your process temperature, if desired.
View Complete Details

Tube And Wire

Adjustable Spring Style Thermocouple
Adjustable spring style thermocouple fits a large range of hole depths. Bends to any angle, eliminating the requirement to stock numerous styles.
View General Information

See Related Spec Sheets.
View Complete Details

High Temperature Schematic Plug

Schematic
Plug or Jack Termination
ASTM Type R, S, B, thermocouple calibrations
High temperature insulations
Loose pack assemblies
Plug or jack cold end terminations
View Complete Details

Mineral Insulated

The main feature of Watlows Style AB thermocouple is it allows you to terminate the thermocouple yourself. Style AB is simply a section of XACTPAK material, junctioned and stripped. It is the most basic of all the mineral insulated thermocouple styles.
View Complete Details

FINBAR Single/Double-Ended Heaters

  • Overall A Dimension 10.25 in 260.0 mm
  • Overall F Dimension 6.5 in 158.0 mm
Composed of aluminized steel fins press fitted to a one-inch single-ended FIREBAR element. The FINBAR is designed to improve heat transfer to the air and permits putting more power in tighter spaces - like forced air ducts, dryers, ovens and load bank resistors.
Heat transfer, lower sheath temperature and element life are all maximized by its finned construction. Installation is simplified by terminations exiting at one end and mounting accommodations on both ends.
View Complete Details

Base Metal

SERV-RITE immersion tips are superior thermocouples for nonferrous molten metals. The hot junction is forged into the 446 stainless steel sheath for maximum sensitivity. Available in Type K calibration only.
View Complete Details

Power Switching Devices

  • Weight 0.71 lb (0.32kg)
  • Height 3.7 in. (95 mm) high x 1.8 in. (45 mm) wide x 3.9 in. (98 mm)
The DIN-A-MITE A power controller is designed and manufactured with quality features expected from Watlow. DIN-A-MITE A capabilities include single-phase zero-cross switching up to 25 amperes at 600VAC (see rating curve). A unique integrated design removes the guesswork associated with selecting a proper heat sink and adequate terminations for the application. DIN-rail and back panel mounting is standard on this family of controllers. The DIN-A-MITE is also mercury free.
View Complete Details

Power Supplies

  • Model Number DSP30
  • AC Input Voltage Range 90-264VAC, Class II double insulated (no ground connection required)
Watlows series of Class 2, low-profile DIN rail-mount power supplies, only 2.2 inches deep, are ideal for shallow enclosure installations commonly used in building automation and security applications.

The DSP series supplies are available with nominal outputs from 20 to 28 volts and power levels ranging from 31 to 91 watts in three package sizes. Load regulation is less than 1 percent from no load to full load, with ripple and noise below 50 millivolts. To compensate for cable voltage drops, output voltage can be adjusted from the front panel and colored LED indicators immediately confirm the output status.


Power Supplies

larger image

Dimensional Drawings of DSP30

larger image

Request Information
Unit of Measure: Imperial Metric Both

Items
Power Supplies


0847-0299-0000
Power Supplies

Power Supplies


0847-0300-0000
Power Supplies

Power Supplies


0847-0301-0000
Power Supplies

Model Number DSP30
DSP60
DSP100

AC Input Voltage Range 90-264VAC, Class II double insulated (no ground connection required)

Input Frequency 47 to 63 Hz

DC Input Voltage Range 120 to 370 VDC

Inrush Current (115230VAC) 2550 A
3060 A
3060 A

Power Factor and Flicker Meets EN61000-3-2, EN61000-3-3

Output Voltage 24 V

Voltage Adjust 24 to 28 V

Current 1.30 A

Power 31.2 Watts
60.0 Watts
100.8 Watts

Typical Efficiency 83 %
86 %
85 %

Hold Up Time (115VAC) 25 ms
12 ms
10 ms

UL 1310 Class 2 Yes
Yes
NA

Output Voltage Accuracy 1% of Nominal

Line Regulation 1 %

Load Regulation 1 %

Ripple and Noise (20MHz BW) mV 50 mV

Overcurrent 110 to 160%, fold

Protection (Type) Forward under short circuit DSP100-24C2 102-108)

Overvoltage Protection (Volts) 120 to 145 %

Hold Up Time (115VAC input) See model selector

LED Indicators Green LED = On
Red LED = DC output low

Operating Temperature -25 to +71C (derate linearly 2.5%C from 55 to 71C)

Temperature Coefficient 0.02 %C

Operating Humidity 20 to 95% RH (non-condensing)

Cooling Convection

Withstand Voltage Input to Output 3kVAC for 1 min.

Isolation Resistance >100M at 25C & 70% RH, output to Ground 500VDC

Vibration (Operating) IEC 60068-2-6 (Mounting by rail: random wave, 10-500 Hz, 2G, ea. along X, Y, Z axes 10 mincycle, 60 min.)

Shock (Operating) IEC 60068-2-27 (Half sine wave, 4G, 22ms, 3 axes, 6 faces, 3 times for each face)

Safety Agency Approvals CE
EN60950-1
UL1310 Class 2
UL60950-1

Immunity EN61000-4-2, -3, -4, -5, -6, -8 and -11

Conducted and Radiated EMI DSP10: EN55022 Class B
DSP30-100: EN55022 Class A

Weight (Typ) 200 g
250 g
320 g

Width 2.09 in
2.8 in
3.54 in

Height 3.58 in

Depth 2.19 in

Case Material Plastic

Warranty 2 Years
View Complete Details

One-Inch FIREBAR Double Ended Heaters

  • Voltage 120 VAC
  • Code No FBN351WD,
  • Heated B Dimension 25.0 in 635.0 mm
  • Watts 310 W
FIREBAR heating elements provide added heating performance over standard round tubular heating elementsespecially for immersion applications in petroleum based liquids requiring high kilowatts.
The FIREBARs unique flat surface geometry packs more power in shorter elements and assemblies, along with a host of other performance improvements. These include:
Minimizing coking and fluid degrading
Enhancing the flow of fluid past the elements surface to carry heat from the sheath
Improving heat transfer with a significantly larger boundary layer allowing much more liquid to flow up and across the sheaths surface
FIREBAR elements are available in single- and double-ended constructions with one inch or 58 inch heights. These two configuration variables make it possible to use FIREBAR elements instead of round tubular elements in virtually all applications.
FINBAR is a special version of the one inch, single-ended FIREBAR. FINBAR is specially modified with fins to further increase surface area for air and gas heating applications.
View Complete Details

EZ-ZONE RUI And Gateway

The EZ-ZONE Remote User Interface (RUI and communications gateway) can be utilized as a communication gateway device to save cost, space and wiring when digital communications is being used with two or more EZ-ZONE controllers. The EZ-ZONE RUI can also serve as a display for showing all parameter values for up to 16 EZ-ZONE controllers, again saving cost, space and wiring expenses.
View Complete Details

Panel Mount Adapter Plates

  • Material aluminum 1100-H14
  • Thickness 0.063 in. (1.6 mm)
Panel mount adapter plates for panel mount controllers and control panels provide a convenient, cost saving solution to modify existing control panels. Available in a variety of DIN sizes, adapter plates make changing out old, larger size temperature controllers with more sophisticated, compact controllers easy. Simply complete the build-a-part with the specifications you require.
View Complete Details

Semiconductor Fuses

  • CoDE 17-8012
  • Amp Rating 12
  • Dimension A 10 mm
  • Dimension B 38.1 mm
For protection of solid state power controllers, such as Watlow's DIN-A-MITE, a semiconductor fuse is recommended to protect the power controller and ensure long life. To safeguard power controllers, Watlow offers DIN-rail mount fuse holders and semiconductor fuses in various sizes to accommodate the entire DIN-A-MITE SCR power controller family and solid state relay products. These fuse holders feature lockouttagout and open fuse indication.
View Complete Details

Current Transformers

  • CoDE 16-0230
  • Current Ratio 50 amp: 50 mA
A current transformer (CT) provides a signal that is proportional to and isolated from the load that passes through it. The signal from the CT can be measured by a temperature or power controller. The value from that measurement may be used to trigger an alarm, detect an open heater or a shorted SSR, or to indicate the current. Choose the model that provides a measurable output for the planned load current.
View Complete Details

Arc Suppression And EMI Filters

  • Voltage 150 VAC
  • CODE 0802-0273-0000
  • Energy 20 J
These accessory components are used with Watlow temperature and process controllers and power controllers to reduce the effects of electromagnetic interference (EMI) and electromagnetic noise. Arc suppression devices are used to protect controller outputs when inductive loads are controlled. EMI filters are used in applications that must meet CE requirements to remove noise associated with operating power controllers.
View Complete Details

Standard Control Panels

  • Voltage 120/240VAC single phase 208/240/480VAC 3 phase
  • Amperage Up to 144 amperes
Proper controller schematic and panel design goes a long way toward ensuring the trouble-free operation of a process system. Watlow has supplied UL 508 control panels for a variety of process control applications.

Watlow offers control panels that are shipped within ten working days of order placement. These panels can drive up to 480VAC, three-phase, 120kW heating systems and are Type 4 rated enclosures that carry the cULus mark. Component installation and wiring conform to applicable NEC andor CEC standards.
View Complete Details

Multipoints Sensors

Temperature variances exist in all systems, regardless of materials, working fluid or system design. There is no process that involves heating a particular medium where temperature of that medium is the same throughout-temperature gradients will always exist. Sensing the temperature at just one location in a process is acceptable for many applications because temperature gradients are often insignificant.
Note: Sensor point locations are measured from protection tube tip. Please specify point location when ordering.
View Complete Details

SpecView HMI Software Standard & Mini

SpecView software from Watlow is a cost-effective, easy-to-use Human Machine Interface (HMI) to Watlow controllers, including EZ-ZONE integrated controllers and third-party products. Watlow's single point of support for hardware, software and application needs ensures knowledgeable and expedient response to questions or concerns.

SpecView from Watlow is commercially accepted and price competitive compared to third-party options. Throughout its history, field-proven features and functions have been added based on customer suggestions. SpecView's built-in support and auto-detect for Watlow controllers is an advantage compared to tag-based systems. Since there is no need to learn intricate details about communication protocols to configure software, setup is quick and simple.

Process adjustments and machine troubleshooting are easily accomplished using graphed data on trend charts. SpecView from Watlow is designed for industrial needs, including built-in compatibility with bar code readers and touch screens. Customizing displays for specific applications reduces process errors. Flexible features include data logging, a historical replay option, easy-to-use recipes and remote access options
View Complete Details

Operator Interfaces

  • CODE TS00-0043-0000
  • Display Width 3.74 in 95 mm
  • Display Height 2.12 in 54 mm
The Silver Series is a rugged, touchscreen operator interface terminal (OIT) available in three sizes (4.3, 7 and 10.2 inch diagonal display sizes). It supports a full set of features including serial and Ethernet communications with multiple controllers, universal serial bus (USB), secure digital (SD) card, data logging, flexible password security and multiple languages. The small bezel size and nominal 2-inch depth make mounting in tight spots easy.
The Silver Series operator interface programming software, EasyBuilder5000, features a large variety of built-in screen objects that makes it easy to use and very powerful. When creating screens, the user can call upon extensive graphics libraries, import custom graphics and add numeric displays, entry fields, analog meters, bar graphs and trend graphs with just a few mouse clicks. Screen objects are highly customizable, and the user can create libraries of their own objects for repeat use.
View Complete Details

Data Loggers And Software

  • Series EZ-ZONE RM
The EZ-ZONE RM controller simplifies thermal system management. The EZ-ZONE RM controller family is comprised of six module types: an integrated on-off or PID control, monitoring and overunder temperature limit module, a high-density on-off or PID control module, a high-density limit only module, an inputoutput (IO) expansion module, a high-density monitorscanner module and a data logging and field communications access module. A system is configured by connecting any combination of module types to address specific application needs. The EZ-ZONE RM is extremely flexible and scalable allowing mixing and matching of IO to configure 1 to 152 control loops and up to 256 monitor points.
View Complete Details

RTD Lead Wire

  • No. of Conductors 2
  • AWG 24
  • Conductor Type/Tolerance Stranded tinned copper
  • Insulation Type PVC
Watlows quality, experience and versatility carry over from insulated thermocouple and extension wire to RTD Lead Wire and fiberglass wire.
View Complete Details

Thermocouple Wire And Thermocouple Extension Wire

  • ASTM E 230 Calibrations Type E
  • AWG 20
High Temperature Vitreous Silica Braided Thermocouple Wire SERIES 301 and 365 (32)
Both the SERIES 301 and 365 use vitreous silica yarn as the insulation on both the conductors and duplex. This yarn retains its flexibility after exposure to high temperatures.
The vitreous silica yarns greater purity performs better at high temperatures than other fibrous glass products. Testing has indicated that contamination will compromise this materials upper use temperature. For this reason, our standard offering is supplied without color coding or impregnations. The 365 construction is a cost-effective, medium insulation build of the popular heavy duty 301 construction.
View Complete Details

Integrated Multi-Function Controllers

The EZ-ZONE RM controller simplifies thermal system management. The EZ-ZONE RM controller family is comprised of six module types: an integrated on-off or PID control, monitoring and overunder temperature limit module, a high-density on-off or PID control module, a high-density limit only module, an inputoutput (IO) expansion module, a high-density monitorscanner module and a data logging and field communications access module. A system is configured by connecting any combination of module types to address specific application needs. The EZ-ZONE RM is extremely flexible and scalable allowing mixing and matching of IO to configure 1 to 152 control loops and up to 256 monitor points.
View Complete Details

Microcoil

MICROCOIL surface temperature sensors are ideal for measuring chuck, internal wall, chip, heat sinks and circuit temperatures. The flexible probe design positions the sensor tip for optimal surface contact and isothermal response and accuracy.
View Complete Details

Radio Frequency Thermocouple Probe

Watlows TR thermocouple probe is designed for use in plasma generation. Radio frequency energy can cause serious temperature measurement errors through radiation or conduction. Traditional sensors are ineffective against the induced noise associated with such environments. The TR probe is ideal for reading temperatures through such interference.
View Complete Details

True Surface Thermocouple

Configure ProductRequest Information

True Surface Thermocouple

larger imageWatlows award winning TST offers superior accuracy for measuring flat surface temperatures. This compact, highly accurate sensor isolates the thermocouple junction from ambient airflow. The TST typically achieves accuracy and repeatability of one to two percent (T).
The TST, with its removable molded cover, fits into corners and other tight locations. TSTs are easy to install with a variety of commonly used screw types. Watlows TST sensor is ideal for many applications including semiconductor chambers, platens, packaging, cleaning and food preparation.
View Complete Details

Mineral Insulated Metal-Sheathed Cable

To maintain quality and consistency, XACTPAK cable is manufactured under carefully controlled procedures and rigid standards of cleanliness. Quality checks are made at critical points throughout the manufacturing process.

All XACTPAK cable is inspected and tested for sheath condition, insulation density, conductor uniformity, electrical continuity, insulation resistance, calibration conformance and physical dimension. Special testing and certificationincluding helium leak, homogeneity and metallurgical examination, among othersare available on request.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Watlow)
  • Saint Louis, MO 63146-4001, United States
  • Share us via