Other Products / Services #5222954

Color Coded COLOR CODED RIBBON CABLE (FLAT CABLE)CHARACTERISTICS: APPLICATION:Temperature Rating: 105CVoltage Rating: 300VCapacitance: 14 pFft. @ 1 mhz*Propogation Delay: 1.4 nsft. - .18 ns rise time pulse*Impedance: 105 ohms nom. *Crosstalk: nom. between two adjacent signal lines @ 1 ns rise time over 10 ft. length; near end 3.2%, far end 11.5%Environmental: resists acids, alkalis, oil, moisture, solvents, ozone and fungusWeico's color Flat Cable is manufactured from pre-insulated color coded conductors which are then laminated on .050 center to center spacing. this permits conventional termination using insulation displacement connectors. Color coding affords immediate identification of discrete wires for positive termination and traceability. Weico's Flat Cable is stocked in bulk (100 ftreel).DESCRIPTION: 28 AWG (736) stranded tinned copper conductor.010" nominal wall PVCConductors laminated to a sheet of .009" clear PVCColor Code: brown, red, orange, yellow, green, blue, violet, gray, white, blackColor code repeats beyond 10 ConductorsUL Listed-Style 2884Passes UL VW-1

Flat Gray .010" PVC Cable GRAY RIBBON CABLE(FLAT CABLE)105C PVCCHARACTERISTICS: APPLICATION:Temperature Rating: 105CVoltage Rating: 300VCapacitance: 14 pFft. nom.*Propogation Delay: 1.4 nsft. - .18 ns rise time pulse @ 1 mhz*Impedance: 105 ohms nom. *Crosstalk: nom. between two adjacent signal lines @ 1 ns rise time over 10 ft. length; near end 3.2%, far end 11.5%Environmental: resists acids, alkalis, oil, moisture, solvents, ozone and fungus Weico's gray Flat Cable is designed for general purpose applications. Because of its exacting specifications, it provides consistent reliable performance. Being ribbed on both sides permits reverse plane termination ability on the same cable length. Flexibility and excellent teardown characteristics allow intricate circuit routing and uniform breakouts for harness production. Weico's Flat Cable is stocked in build (100 Ft.Reel). DESCRIPTION: 28 AWG (736) stranded tinned copper conductorNominal Insulation Thickness: .010" PVCConductors on .050" centersGray PVC with red stripe on leading edgeUL Listed-Style 2651Passes UL VW-1

M168781 TYPE B 600V, 105C MIL-W-168781TYPE B-600V CHARACTERISTICS: Temperature Rating: -55C to +105CVoltage Rating: 600VPasses UL VW-1 Flame Test DESCRIPTION: Stranded Tinned Copper, Color Coded Polyvinylchloride Insulation

TRAY CABLE, FLEXIBLE POWER AND CONTROL CABLES DESCRIPTION:Finely stranded bare copper conductors, specially blended PVCNylon insulation;Black Numbered + GreenYellow Ground Conductors, specially formulated oilresistant black PVC Jacket. CHARACTISTICS:Temperature Rating: -25C to + 90C(UL)TC-ER 90C, 600V(UL) MTW 600VC(UL) approved for CICTC Sunlight resistance FT1 FT4 applicationsUL approved for Direct Burial, Sunlight and OIL I Resistant applicationsSuitable for use in Class I Division II hazardous locations and installations under NEC (NFPA 70) article 336 and article 670 guidelines COLOR CODE: Black Numbered Plus GreenYellow Standard Put-Ups: 100FT., 1000FT

Solderable Polyester MW-77C - JW 117739B CL-180 Insulation Characteristics: All the characteristics of polyurethane 130C plus the increased thermal rating to class 155C, solderable at 680F. General Applications: R.F. coils, solenoids, encapsulated coils, motors, relays, low voltage transformers, ignition coils, layer and precision wound coils. Part Number Code: _PUNEMA Standard (MW 1000): MW-79-C Federal Spec. (JW 1177B): JW 117741B CL-155 SPU, SPU2, SPU3, SPU4Military Spec. (MIL W 583C): None Available in Gauges 4-60Single or Heavy Build Insulation

Polyester Amide-Imide 200C Insulation Characteristics: Provides outstanding windability, resistance to heat shock and tolerance to overloads. Resists most solvents and insulating varnish. Insulation Characteristics: Dry transformers, motors, automotive and hand tool armatures. Part Number Code: _EINEMA Standard (MW 1000): MW-35-C (Round)MW-74-C (Round) Federal Spec. (JW 1177B): JW 117714B CL - 200 Types K, K2, K3, K4JW 117743B CL - 200 Types PEAI, PEA2, PEA3, PEA4Military Spec. (MIL W 583C): Class 200 Types K, K2, K3, K4Class 200 Types PEAI, PEA2, PEA3, PEA4 Available in Gauges 4-60Single or Heavy Build Insulation

Polyurethane Nylon MW-80C - JW 117742B CL-155 Insulation Characteristics: All the characteristics of polyurethane 130C plus the increased thermal rating to class 155C, solderable at 680F. Insulation Characteristics: Toroid coils, encapsulated coils, relays, clock and timer coils, solenoids, appliance motors. Part Number Code: _PNNEMA Standard (MW 1000): MW-80-C Federal Spec. (JW 1177B): JW 117742B CL-155 SPUN, SPUN2, SPUN3, SPUN4Military Spec. (MIL W 583C): None Available in Gauges 4-60Single or Heavy Build Insulation

Polyimide 220C, MW-16C Insulation Characteristics: Exceptional resistance to solvents and burnout, able to withstand excessive overloads, unaffected by continued exposure to varnish solvents. Insulation Characteristics: High temperature continuous duty coils, motors, encapsulated coils, heavy duty hand tool motors. Part Number Code: _MLNEMA Standard (MW 1000): MW-16-C (Round)MW-20-C (Sq. & Rect.) Federal Spec. (JW 1177B): JW 117715B CL-220 Types M, M2, M3, M4 (Round) JW 117718B CL-220 Types M2, M4 (Sq. & Rect.)Military Spec. (MIL W 583C): Class 220 Types M, M2, M3, M4* Registered trademark DuPont Corp. Available in Gauges 4-60Single or Heavy Build Insulation

Formvar 105C MW-15C-JW11774B CL-105 Thermal Class 105 Insulation Characteristics: Excellent flexibility and abrasion resistance. Will withstand excessive tension during widing, should be annealed prior to varnishing to avoid crazing. Requires mecnanical or chemical stripping. General Applications: Motors, coils oil filled and dry transformers, armature and generator windings. NEMA Standard (MW 1000): MW-15-C (Round)MW-18-C (Sq & Rect)Federal Spec. (JW 1177B): JW 11774B CL-105 Types T, T2, T3, T4 (Round)JW 117716B CL-105 Types T2, T4 (Sq & Rect) Military Spec. (MIL W 583C): Class 105 Types T, T2, T3, T4 Available in Gauges 4-60Single or Heavy Build Insulation

Polyurethene MW-79C - JW 117741B CL -155 - CLASS 155 Insulation Characteristics: All the characteristics of polyurethane 130C plus the increased thermal rating to class 155C, solderable at 680F. General Applications: R.F. coils, solenoids, encapsulated coils, motors, relays, low voltage transformers, ignition coils, layer and precision wound coils. Part Number Code: _PUNEMA Standard (MW 1000): MW-79-C Federal Spec. (JW 1177B): JW 117741B CL-155 SPU, SPU2, SPU3, SPU4Military Spec. (MIL W 583C): None Available in Gauges 4-60Single or Heavy Build Insulation

Polyethylene Dielectric Per MIL-C-17 MIL-C-17COAXIAL CABLE (POLYETHYLENE DIELECTRIC)COAXIAL CABLE

MULTICONDUCTOR BRAIDED SHIELD 80C PEPVC - 600V CHARACTERISTICS: Temperature Rating: -20C to +80CSuggested Working Voltage: 600V DESCRIPTION: Each conductor is 2634 of Stranded Tinned Copper, Nominal Insulation Thickness is .015", Color Coded Polyethlene Insulation, Cabled with Fillers where necessary, Mylar Wrap, Braided Tinned Copper Shield, Gray Polyvinylechloride Jacket Overall

MULTICONDUCTORDUAL SHIELD APPLICATIONS: DESCRIPTION:Semi-ridge PVC Insulation24 AWG (7x32) TC ConductorsOverall Foil Shield (100% coverage) +TC Braid Shield (65% min coverage)UL Listed, NEC Type CMGUL AWM Style 246480C - 300V

MULTICONDUCTORMAGNASHIELD80 - 300V DESCRIPTION SPECIFICATIONS:Each Conductor Stranded Tinned Copper, #22 Stranded (730) Nom. Ins. Thickness .010"#18 Stranded (1630) Nom. Ins. Thickness .017"#16 Stranded (1929) Nom. Ins. Thickness .017"Color Coded Polyvinylchloride Insulation, MAGNAShield (Aluminum Foil PolyesterAluminumFoil with Drain Wire and Tinned Copper Braid)Nylon Rip Cord for Ease of Jacket Stripping, Gray PVC Jacket Overall.UL Listed, NEC Type CM, 75CUL AWM Style 2464, 80C, 300VCSA Certified PCC FT-4OSHA AcceptableMeets FCC Docket 20780MIL-STDS 461 & 462B and Tempest

Plenum-CL2P COAXIAL CL2P(NEC-725-2B) CHARACTERISTICS: High Transmission SpeedAllows Longer Cable Lengths in Computer SystemsCan Be Installed in Air Ducts And Plenums Without ConduitUL ListedTemp Range: -90C to +200C DESCRIPTION: Fluoropolymer Coaxial Cables are made to the most exacting specifications in the wire and cable industry. WEICO'S designs and standards allow for dramatic improvements in critical data communications electrical characteristics such as: signal speed, attenuation, and capacitance.

SHIELDED FIRE ALARM FIRE ALARM-FPLP(NEC-760-4d) - SHIELDED DESCRIPTION Each Conductor Solid Tinned Copper, Color Coded Fluoropolymer Resin Insulated, Twisting Pair Overall Aluminum Foil Shield (100% coverage)Drain Wire, Fluoropolymer Jacket Overall.

20 AWG Thru 12 AWG TWISTED PAIRUNSHIELDED DESCRIPTION SPECIFICATIONS:Each Conductor is Stranded Tinned High Conductivity Copper, 20 AWG Nominal Insulation Thickness .013"16 AWG Nominal Insulation Thickness .023"14 AWG Nominal Insulation Thickness .031"12 AWG Nominal Insualtion Thickness .032"Color Coded Polyvinylchloride Insulation, Gray Polyvinylchloride Jacket OverallTemperature - Voltage Rating20 AWG :80C, 300V16 AWG :60C, 300V14-12 AWG :90C, 600V

UNSHIELDED - CL2P CL2P - (NEC-725-2b)(NON-CONDUIT)SHIELDED - UNSHIELDEDPAIRED - UNPAIRED DESCRIPTION: APPLICATION:Conductors Tinned or Bare Copper, Insulated withFluoropolymer Resin, Conductors Paired, Unshielded, Drain Wire, Extruded FluoropolymerTransparent Jacket Overall. Computer Interconnect, Instrumentation and Control, Business Machines, and Remote Control Signaling.

Tubular TUBULAR BRAID QQ-B-575 RASTM-B-33 DESCRIPTION: APPLICATION:Tinned Copper Brid Woven in Completely Round Configuration as Outlined in SPEC QQ-B-575.Used As Both Shielding and Protective Covering. Shielding is 95% Or More When Placed Over Equivalent Diameter Mandrel To The Inside Diameter of Tubular Braid.

Bare Copper Hookup WIre Solid Electrolytic Soft Drawn & Annealed SOFT DRAWN BUSMIL-W-3861 TYPE SQQ-W-343 TYPE SASTM-B-33 DESCRIPTION: APPLICATION:Electrolytic, Soft Drawn and Annealed, Solid Bare Copper

Prebonded UL1007-UL1569, 300V, 105C PVC Hookup Wire PREBONDED UL1007 - UL1569UL1007 UL1569CSA TR-641007 CHARACTERISTICS: APPLICATION:Temperature Rating: -40C to +105CVoltage Rating: 300VPasses UL VW-1 Flame Test The Prebond conductor maintains much of the flexibility of an ordinary stranded wire but reduces processing and handling costs on soldering, retwisting of strands after stripping and hand tinning operations. Prebonded is the most flexible of the bonded constructions.DESCRIPTION:Tinned copper strands twisted together and heated causing the tin to flow, fusing the conductor along its entire length., .016" Nominal Insulation Thickness

Type ET M168786 UL1371 Solid Hookup Wire PTFE Insulated Wire UL Approved Wire TYPE ET - 250VMIL-W-168786SOLID CONDUCTORUL13711371 CHARACTERISTICS: Temperature Rating: -60C to +200CVoltage Rating: 250VPasses UL VW-1 Flame Test DESCRIPTION: Solid Silver Plated Copper, Extruded PTFE Insulation

UL 3173, SIS, CSA CL1251, 600V, 125C UL 3173 UL SISCSA CL 1251 3173 CHARACTERISTICS: Temperature Rating:UL 3173: -35C to +125CSIS: -35C to +90CVoltage Rating: 600V DESCRIPTION: Stranded Tinned Copper, Color Coded Cross Linked Polyethylene Insulation Click Here To Download The Spec Sheet

Rubber Test Wire 90C High Voltage Hookup Wire Insulation TEST LEAD WIRE CHARACTERISTICS: Temperature Rating: -30C to +90CVoltage Rating: SEE TABLE DESCRIPTION: Stranded Tinned Copper, Color coded rubber insulation.

UL3239, 15KV-40KV, 150C High Voltage Wire Silicone Rubber Insulated UL 3239 Silicone Rubber CHARACTERISTICS: Temperature Rating: -40C to +150CVoltage Rating: 15KV Through 40KVPasses UL VW-1 Flame Test DESCRIPTION: Stranded Tinned Copper, Color Coded Silicone Rubber Insulation

Shielded And Jacketed SHIELDED & JACKETED RIBBON CABLE(FLAT CABLE) CHARACTERISTICS: APPLICATION:Temperature Rating: 105CVoltage Rating: 150VCapacitance: 20 pFft. nom.*Propogation Delay: 1.45 nsft. - .10 ns rise time pulse @ 1 mhz*Impedance: 70 ohms nom.Crosstalk: 5.5% near end; 1.6% far end; 10 ft. sample @ 3.5 ns rise time pulse 2.0% near end; .50% far end; 10 ft. sample @ 7.0ns rise time pulse Weico's shielded and jacketed flat cable is designed for use in frequency applications where RF protection is mandated. This general purpose shielded cable minimizes electrical interference and cross talk in such applications. This series uses Weico's gray flat cable and an aluminumpolyester shield. The shielding is folded to provide excellent metal to metal contact and utilizes two drain wires to facilitate grounding. The jacket is a rugged .030" thick flame retardant 105C black PVC with excellent abrasion resistance. DESCRIPTION: 28 AWG (736) stranded tinned copper conductorNominal Insulation Thickness: 010" PVCConductors on .050" centersGray PVC with red stripe on leading edgeOverall AluminumPolyester shield with two stranded tinned copper drain wires - 28 AWG (736)Black PVC Jacket - Thickness: .030" MinimumUL Style 2912Passes UL VW-1 flame test

WELDING CABLE WELDING CABLENEOPRENE DESCRIPTION Stranded Bare Copper Conductor.Black Neoprene JacketTemperature Range: -30C to +90C