Other Products / Services #5222954

Color Coded

COLOR CODED RIBBON CABLE (FLAT CABLE)
CHARACTERISTICS: APPLICATION:
Temperature Rating: 105C
Voltage Rating: 300V
Capacitance: 14 pFft. @ 1 mhz*
Propogation Delay: 1.4 nsft. - .18 ns rise time pulse*
Impedance: 105 ohms nom. *
Crosstalk: nom. between two adjacent signal lines @ 1 ns rise time over 10 ft. length; near end 3.2%, far end 11.5%
Environmental: resists acids, alkalis, oil, moisture, solvents, ozone and fungus
Weico's color Flat Cable is manufactured from pre-insulated color coded conductors which are then laminated on .050 center to center spacing. this permits conventional termination using insulation displacement connectors. Color coding affords immediate identification of discrete wires for positive termination and traceability. Weico's Flat Cable is stocked in bulk (100 ftreel).
DESCRIPTION:
28 AWG (736) stranded tinned copper conductor
.010" nominal wall PVC
Conductors laminated to a sheet of .009" clear PVC
Color Code: brown, red, orange, yellow, green, blue, violet, gray, white, black
Color code repeats beyond 10 Conductors
UL Listed-Style 2884
Passes UL VW-1

Flat Gray .010" PVC Cable

GRAY RIBBON CABLE
(FLAT CABLE)
105C PVC
CHARACTERISTICS: APPLICATION:
Temperature Rating: 105C
Voltage Rating: 300V
Capacitance: 14 pFft. nom.*
Propogation Delay: 1.4 nsft. - .18 ns rise time pulse @ 1 mhz*
Impedance: 105 ohms nom. *
Crosstalk: nom. between two adjacent signal lines @ 1 ns rise time over 10 ft. length; near end 3.2%, far end 11.5%
Environmental: resists acids, alkalis, oil, moisture, solvents, ozone and fungus

Weico's gray Flat Cable is designed for general purpose applications. Because of its exacting specifications, it provides consistent reliable performance. Being ribbed on both sides permits reverse plane termination ability on the same cable length. Flexibility and excellent teardown characteristics allow intricate circuit routing and uniform breakouts for harness production. Weico's Flat Cable is stocked in build (100 Ft.Reel).

DESCRIPTION:
28 AWG (736) stranded tinned copper conductor
Nominal Insulation Thickness: .010" PVC
Conductors on .050" centers
Gray PVC with red stripe on leading edge
UL Listed-Style 2651
Passes UL VW-1

M168781 TYPE B 600V, 105C

MIL-W-168781
TYPE B-600V
CHARACTERISTICS:
Temperature Rating: -55C to +105C
Voltage Rating: 600V
Passes UL VW-1 Flame Test


DESCRIPTION:
Stranded Tinned Copper, Color Coded Polyvinylchloride Insulation

TRAY CABLE, FLEXIBLE POWER AND CONTROL CABLES


DESCRIPTION:
Finely stranded bare copper conductors, specially blended PVCNylon insulation;
Black Numbered + GreenYellow Ground Conductors, specially formulated oil
resistant black PVC Jacket.

CHARACTISTICS:
Temperature Rating: -25C to + 90C
(UL)TC-ER 90C, 600V
(UL) MTW 600V
C(UL) approved for CICTC Sunlight resistance FT1 FT4 applications
UL approved for Direct Burial, Sunlight and OIL I Resistant applications
Suitable for use in Class I Division II hazardous locations and installations under
NEC (NFPA 70) article 336 and article 670 guidelines

COLOR CODE: Black Numbered Plus GreenYellow

Standard Put-Ups: 100FT., 1000FT

Solderable Polyester MW-77C - JW 117739B CL-180


Insulation Characteristics: All the characteristics of polyurethane 130C plus the increased thermal rating to class 155C, solderable at 680F.

General Applications: R.F. coils, solenoids, encapsulated coils, motors, relays, low voltage transformers, ignition coils, layer and precision wound coils.

Part Number Code: _PU
NEMA Standard (MW 1000): MW-79-C

Federal Spec. (JW 1177B): JW 117741B CL-155 SPU, SPU2, SPU3, SPU4
Military Spec. (MIL W 583C): None
Available in Gauges 4-60
Single or Heavy Build Insulation

Polyester Amide-Imide 200C


Insulation Characteristics: Provides outstanding windability, resistance to heat shock and tolerance to overloads. Resists most solvents and insulating varnish.

Insulation Characteristics: Dry transformers, motors, automotive and hand tool armatures.

Part Number Code: _EI
NEMA Standard (MW 1000):
MW-35-C (Round)
MW-74-C (Round)

Federal Spec. (JW 1177B): JW 117714B CL - 200 Types K, K2, K3, K4
JW 117743B CL - 200 Types PEAI, PEA2, PEA3, PEA4
Military Spec. (MIL W 583C): Class 200 Types K, K2, K3, K4
Class 200 Types PEAI, PEA2, PEA3, PEA4
Available in Gauges 4-60
Single or Heavy Build Insulation

Polyurethane Nylon MW-80C - JW 117742B CL-155


Insulation Characteristics: All the characteristics of polyurethane 130C plus the increased thermal rating to class 155C, solderable at 680F.

Insulation Characteristics: Toroid coils, encapsulated coils, relays, clock and timer coils, solenoids, appliance motors.

Part Number Code: _PN
NEMA Standard (MW 1000): MW-80-C

Federal Spec. (JW 1177B): JW 117742B CL-155 SPUN, SPUN2, SPUN3, SPUN4
Military Spec. (MIL W 583C): None
Available in Gauges 4-60
Single or Heavy Build Insulation

Polyimide 220C, MW-16C


Insulation Characteristics: Exceptional resistance to solvents and burnout, able to withstand excessive overloads, unaffected by continued exposure to varnish solvents.

Insulation Characteristics: High temperature continuous duty coils, motors, encapsulated coils, heavy duty hand tool motors.

Part Number Code: _ML
NEMA Standard (MW 1000):
MW-16-C (Round)
MW-20-C (Sq. & Rect.)

Federal Spec. (JW 1177B): JW 117715B CL-220 Types M, M2, M3, M4 (Round) JW 117718B CL-220 Types M2, M4 (Sq. & Rect.)
Military Spec. (MIL W 583C): Class 220 Types M, M2, M3, M4
* Registered trademark DuPont Corp.


Available in Gauges 4-60
Single or Heavy Build Insulation

Formvar 105C MW-15C-JW11774B CL-105


Thermal Class 105

Insulation Characteristics: Excellent flexibility and abrasion resistance. Will withstand excessive tension during widing, should be annealed prior to varnishing to avoid crazing. Requires mecnanical or chemical stripping.

General Applications: Motors, coils oil filled and dry transformers, armature and generator windings.

NEMA Standard (MW 1000): MW-15-C (Round)
MW-18-C (Sq & Rect)
Federal Spec. (JW 1177B): JW 11774B CL-105 Types T, T2, T3, T4 (Round)
JW 117716B CL-105 Types T2, T4 (Sq & Rect)

Military Spec. (MIL W 583C): Class 105 Types T, T2, T3, T4 Available in Gauges 4-60
Single or Heavy Build Insulation

Polyurethene MW-79C - JW 117741B CL -155 - CLASS 155


Insulation Characteristics: All the characteristics of polyurethane 130C plus the increased thermal rating to class 155C, solderable at 680F.

General Applications: R.F. coils, solenoids, encapsulated coils, motors, relays, low voltage transformers, ignition coils, layer and precision wound coils.

Part Number Code: _PU
NEMA Standard (MW 1000): MW-79-C

Federal Spec. (JW 1177B): JW 117741B CL-155 SPU, SPU2, SPU3, SPU4
Military Spec. (MIL W 583C): None
Available in Gauges 4-60
Single or Heavy Build Insulation

Polyethylene Dielectric Per MIL-C-17


MIL-C-17
COAXIAL CABLE
(POLYETHYLENE DIELECTRIC)
COAXIAL CABLE

MULTICONDUCTOR
BRAIDED SHIELD
80C PEPVC - 600V


CHARACTERISTICS:
Temperature Rating: -20C to +80C
Suggested Working Voltage: 600V


DESCRIPTION:
Each conductor is 2634 of Stranded Tinned Copper,
Nominal Insulation Thickness is .015",
Color Coded Polyethlene Insulation,
Cabled with Fillers where necessary, Mylar Wrap,
Braided Tinned Copper Shield,
Gray Polyvinylechloride Jacket Overall

MULTICONDUCTOR
DUAL SHIELD



APPLICATIONS: DESCRIPTION:
Semi-ridge PVC Insulation
24 AWG (7x32) TC Conductors
Overall Foil Shield (100% coverage) +
TC Braid Shield (65% min coverage)
UL Listed, NEC Type CMG
UL AWM Style 2464
80C - 300V

MULTICONDUCTOR
MAGNASHIELD
80 - 300V





DESCRIPTION SPECIFICATIONS:
Each Conductor Stranded Tinned Copper,
#22 Stranded (730) Nom. Ins. Thickness .010"
#18 Stranded (1630) Nom. Ins. Thickness .017"
#16 Stranded (1929) Nom. Ins. Thickness .017"
Color Coded Polyvinylchloride Insulation,
MAGNAShield (Aluminum Foil PolyesterAluminum
Foil with Drain Wire and Tinned Copper Braid)
Nylon Rip Cord for Ease of Jacket Stripping, Gray PVC Jacket Overall.
UL Listed, NEC Type CM, 75C
UL AWM Style 2464, 80C, 300V
CSA Certified PCC FT-4
OSHA Acceptable
Meets FCC Docket 20780
MIL-STDS 461 & 462B and Tempest

Plenum-CL2P

COAXIAL CL2P
(NEC-725-2B)



CHARACTERISTICS:
High Transmission Speed
Allows Longer Cable Lengths in Computer Systems
Can Be Installed in Air Ducts And Plenums Without Conduit
UL Listed
Temp Range: -90C to +200C

DESCRIPTION:
Fluoropolymer Coaxial Cables are made to the most exacting specifications in the wire and cable industry. WEICO'S designs and standards allow for dramatic improvements in critical data communications electrical characteristics such as: signal speed, attenuation, and capacitance.

SHIELDED FIRE ALARM

FIRE ALARM-FPLP
(NEC-760-4d) - SHIELDED




DESCRIPTION
Each Conductor Solid Tinned Copper,
Color Coded Fluoropolymer Resin Insulated,
Twisting Pair Overall Aluminum Foil Shield (100% coverage)
Drain Wire, Fluoropolymer Jacket Overall.

20 AWG Thru 12 AWG

TWISTED PAIR
UNSHIELDED



DESCRIPTION SPECIFICATIONS:
Each Conductor is Stranded Tinned High Conductivity Copper,
20 AWG Nominal Insulation Thickness .013"
16 AWG Nominal Insulation Thickness .023"
14 AWG Nominal Insulation Thickness .031"
12 AWG Nominal Insualtion Thickness .032"
Color Coded Polyvinylchloride Insulation,
Gray Polyvinylchloride Jacket Overall
Temperature - Voltage Rating
20 AWG :80C, 300V
16 AWG :60C, 300V
14-12 AWG :90C, 600V

UNSHIELDED - CL2P

CL2P - (NEC-725-2b)
(NON-CONDUIT)
SHIELDED - UNSHIELDED
PAIRED - UNPAIRED





DESCRIPTION: APPLICATION:
Conductors Tinned or Bare Copper, Insulated with
Fluoropolymer Resin, Conductors Paired,
Unshielded, Drain Wire, Extruded Fluoropolymer
Transparent Jacket Overall.

Computer Interconnect, Instrumentation and Control,
Business Machines, and Remote Control Signaling.

Tubular

TUBULAR BRAID
QQ-B-575 R
ASTM-B-33


DESCRIPTION: APPLICATION:
Tinned Copper Brid Woven in Completely Round Configuration as Outlined in SPEC QQ-B-575.
Used As Both Shielding and Protective Covering. Shielding is 95% Or More When Placed Over Equivalent Diameter Mandrel To The Inside Diameter of Tubular Braid.

Bare Copper Hookup WIre Solid Electrolytic Soft Drawn & Annealed

SOFT DRAWN BUS
MIL-W-3861 TYPE S
QQ-W-343 TYPE S
ASTM-B-33
DESCRIPTION: APPLICATION:
Electrolytic, Soft Drawn and Annealed,
Solid Bare Copper

Prebonded UL1007-UL1569, 300V, 105C PVC Hookup Wire

PREBONDED UL1007 - UL1569
UL1007 UL1569
CSA TR-64
1007
CHARACTERISTICS: APPLICATION:
Temperature Rating: -40C to +105C
Voltage Rating: 300V
Passes UL VW-1 Flame Test

The Prebond conductor maintains much of the flexibility of an ordinary stranded wire but reduces processing and handling costs on soldering, retwisting of strands after stripping and hand tinning operations. Prebonded is the most flexible of the bonded constructions.
DESCRIPTION:
Tinned copper strands twisted together and heated causing the tin to flow, fusing the conductor along its entire length., .016" Nominal Insulation Thickness

Type ET M168786 UL1371 Solid Hookup Wire PTFE Insulated Wire UL Approved Wire

TYPE ET - 250V
MIL-W-168786
SOLID CONDUCTOR
UL1371
1371
CHARACTERISTICS:
Temperature Rating: -60C to +200C
Voltage Rating: 250V
Passes UL VW-1 Flame Test


DESCRIPTION:
Solid Silver Plated Copper,
Extruded PTFE Insulation

UL 3173, SIS, CSA CL1251, 600V, 125C


UL 3173 UL SIS
CSA CL 1251
3173
CHARACTERISTICS:
Temperature Rating:
UL 3173: -35C to +125C
SIS: -35C to +90C
Voltage Rating: 600V


DESCRIPTION:
Stranded Tinned Copper, Color Coded Cross Linked Polyethylene Insulation

Click Here To Download The Spec Sheet

Rubber Test Wire 90C High Voltage Hookup Wire Insulation

TEST LEAD WIRE
CHARACTERISTICS:
Temperature Rating: -30C to +90C
Voltage Rating: SEE TABLE


DESCRIPTION:
Stranded Tinned Copper,
Color coded rubber insulation.

UL3239, 15KV-40KV, 150C High Voltage Wire Silicone Rubber Insulated

UL 3239 Silicone Rubber


CHARACTERISTICS:
Temperature Rating: -40C to +150C
Voltage Rating: 15KV Through 40KV
Passes UL VW-1 Flame Test


DESCRIPTION:
Stranded Tinned Copper, Color Coded Silicone Rubber Insulation

Shielded And Jacketed

SHIELDED & JACKETED RIBBON CABLE
(FLAT CABLE)


CHARACTERISTICS: APPLICATION:
Temperature Rating: 105C
Voltage Rating: 150V
Capacitance: 20 pFft. nom.*
Propogation Delay: 1.45 nsft. - .10 ns rise time pulse @ 1 mhz*
Impedance: 70 ohms nom.
Crosstalk: 5.5% near end; 1.6% far end; 10 ft. sample @ 3.5 ns rise time pulse
2.0% near end; .50% far end; 10 ft. sample @ 7.0ns rise time pulse


Weico's shielded and jacketed flat cable is designed for use in frequency applications where RF protection is mandated. This general purpose shielded cable minimizes electrical interference and cross talk in such applications.

This series uses Weico's gray flat cable and an aluminumpolyester shield. The shielding is folded to provide excellent metal to metal contact and utilizes two drain wires to facilitate grounding. The jacket is a rugged .030" thick flame retardant 105C black PVC with excellent abrasion resistance.

DESCRIPTION:
28 AWG (736) stranded tinned copper conductor
Nominal Insulation Thickness: 010" PVC
Conductors on .050" centers
Gray PVC with red stripe on leading edge
Overall AluminumPolyester shield with two stranded tinned copper drain wires - 28 AWG (736)
Black PVC Jacket - Thickness: .030" Minimum
UL Style 2912
Passes UL VW-1 flame test

WELDING CABLE

WELDING CABLE
NEOPRENE


DESCRIPTION
Stranded Bare Copper Conductor.
Black Neoprene Jacket
Temperature Range: -30C to +90C