Other Products / Services #4955727

X nozzle shuts off when:
the pump shuts off.
the gas tank is full.
the lever is opened before the pump is turned on.
the leak detector has not completed the test cycle.
Double poppet allows to the penny dispensing.
Double poppet is a two (2) step closure reducing the pressure spiking, or hydraulic hammer and the adverse effects it has on the hose and dispenser meter.
Aluminum reinforced spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
Nozzle is equipped with a unique Flo-Stop device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
StreamShaper reduces turbulence for straighter fuel flow and less splash back spillage.
Comes standard with smooth full grip guard.

Husky pressure vacuum (PV) vents incorporate three (3) separate valves to control over-pressure and vacuum conditions that arise in storage tanks. The three (3) valve system provides the necessary protection and durability needed in UST and AST vent caps.
The vacuum valve is diaphragm operated and provides ten (10) times more sealing force than gravity devices. It consistently opens at 6 8 of water column (WC) 2 2.5 KPa vacuum.
The first over-pressure valve is diaphragm operated, giving ten (10) times more sealing force than gravity devices. It opens at 8 12 WC .75 1.5 KPa pressure.
The safety over-pressure valve is designed to handle high pressure high flow conditions. This valve will vent up to 7900 SCFH at 2 psi .14 bar.
Threaded vent cap that is easily installed by using the cast-on hex nut which allows tightening without having to go between vent pipes.

Nozzle Guards, Nozzle Reguards, Waffle Splash Guards and Safe-T-Break Guards are to be ordered with the corresponding color option added to the model number.
Custom colors are available for all Nozzle Guards, Nozzle Reguards, Waffle Splash Guards and Safe-T-Break Guards.
The SafetyWarning logo will be printed on all Nozzle Guards and Nozzle Reguards.
The E85 logo is available on all Nozzle Guards, Nozzle Reguards and Safe-T-Break Guards upon request.
A customized logo can be printed on any Nozzle Guard or Nozzle Reguard upon request.

Aluminum reinforced spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
Contains a poppet disc seal rated at -40FC to prevent fuel leakage from the main seal in extreme cold weather.
Nozzle is equipped with a unique Flo-Stop device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
StreamShaper reduces turbulence for straighter fuel flow and less splash back spillage.
Nozzle comes with smooth full grip guard.

Multi-plane, full 360 spherical rotation for easy movement of nozzle.
Swivel Sync feature to prevent separation failure in the 90 position.
Safe-T-Break is reconnectable and retains UL listing after reconnecting.
Dual check valves stops fuel in both directions.
Separates at less than 275 lbf 1, 223.3 N which minimizes backlash force of separations, reducing damage to equipment.
Wave spring helps reduce nuisance breaks due to water hammer.
Dynamic seals have double o-ring construction for long life and low temperature performance.
Compatible with Ethanol blends through E10.
Compact and light weight for easy handling.
Easier to reconnect when installed at the nozzle.
Eliminates the need for a whip hose.

007214, 007285, 007356, 008413, 010579, 010675, 011477 and 012872 adaptors have stainless steel construction
010227, 010549, 010551 and 010553 adaptors have polymer construction
007214, 007285, 007356 and 008413 adaptors are UL recognized components and certified for DEF



007214, 007285, 007356, 008413, 010579, 010675, 011477 and 012872 adaptors have stainless steel construction
010227, 010549, 010551 and 010553 adaptors have polymer construction
007214, 007285, 007356 and 008413 adaptors are UL recognized components and certified for DEF