We offer a complete product range of INTERNALLY THREADED STEM, MINI BASE Piercing Micro Labrets, MICRO BASIC Piercing Micro Labrets, BASIC MICRO BARBELL and ANODISED VIOLET
Titanium Micro Internally Threaded Labret Stud. The Internally Threaded Labret Stud with a thickness of 1.2mm is available in lengths of 6.0 to 10.0mm. The matching ball has a diameter of 3.0mm. The lower part of the jewelery is flattened, the upper end will be closed with a ball (a labret stud consists of a rod with a plate and a ball). The thread of the stud is internally threaded, its ball can be screwed into the thread of the rod. By the way, all the threads in our jewelry collections are standardized, so you can combine the rings, balls, sticks and attachments!
Thickness 1.2mm, Length 5, 6, 7 and 8mm, Ball Size 1.5, 2.0, 2.5 and 3mm.Our fantastic new Titanium Highline Triple Piercing Microlabrets are also available in Blackline™ coatings for the perfect colour to match every style.
Titan Zirconline® Micro Labret Stud The Titan Zirconline® Micro Labret Stud has a strength of 1.2 mm and is available in lengths of 5.0 – 10.0 mm (in steps of one). The suitable ball has a diameter of 3.0 mm. The bottom part of the attire is flattened, the top part gets closed by a threaded ball (so a labret stud consists of a bar with a small plate and a ball). The ball gets screwed onto the studs external thread. By the way, all threads in our jewellery collection are standardised, therefore you can combine the rings, balls, bars and attachments. Keep an eye on sizes and threads of your favoured balls and attachments! During the coating of our jewellery by the physical vapour deposition system a thin and abrasion-resistant coat is laid on the jewellery. It complies around the Titan like a covering, without needing any further processing. The advantage of this kind of colour adaption to black (Titan Blackline®) and gold (Titan Zircoline®) is, that the characteristics of the Titan are not influenced by its coloration. The biocompatibility is ensured, as this process is also used in the medical science (e.g. for implants). The article can, like all basics, be sterilised in an autoclave and due to the skin friendliness of the material it is absolutely harmless to allergic persons. This article is also available in the Titan Blackline® (KZL) and the Titan Highline® (ZLS). If you are looking for an alternative to titan and steel, we suggest our BioPlast line (e.g. WABBLA). The suitable replacement balls can be found in the Titan Zirconline®, they are called GTB. If there are any questions left, please do not hesitate to contact us, the employees of the Wildcat corporation will give you advice!
Titan Blackline® MicrobellThe premium processed Titan Blackline® Microbell is available in lengths of 6.0 to 12.0 mm (in steps of two). The microbarbells have threaded balls on both ends (a barbell consists of a stem and two balls). The stems strength is 1.2 mm, which makes it perfectly suitable for first use. The balls are available with a diameter of 3.0 mm. They get screwed on the barbells external thread. The balls not only provide a strong hold, but also give a special look! By the way, all of our threads are standardized, so that you are able to combine rings, balls, studs and attachments! Please pay attention to the different kinds and sizes of the threads. The compatible replacement balls can be found in the Titan Highline®, they are called KTB. Replacement stems can be found among KST! The article can, like all basics, be sterilised in an autoclave and due to the skin friendliness of the material it is absolutely harmless to allergic persons. This article is also available in the Steel Basicline® (MIC), the Titan Highline® (ZML), the Titan Zirconline® (GML) and in the Steel Blackline® (KLM). Availability of sizes may vary! If there are any questions left, please do not hesitate to contact us, the employees of the Wildcat corporation will give you advice!
XCBVLTitan Highline(r) Circular Barbell violet anodisedThe premium processed circular barbells of the Titan Highline(r) are horseshoe-shaped which means that between both clasping balls, that hold the ring in the pierced canal, is a slight opening. By the way all the threads in our collection of jewellery are standardised, which makes various combinations of pieces with all kinds of clasping balls possible. The circular barbells are externally threaded in the strengthes 1.6 up to 2.4 mm, so the clasping balls will be screwed onto the external threads. All barbells from strength 3.0 mm on are internally threaded, therefore the clasping balls will be screwed into the thread. BR>The ball sizes depend on strength and inner diameter of the ring and will be delivered in following combinations: strength 1.2 mm:diameter 5.0 – 10.0 mm (single steps), 12.0 mm = 3.0 mm balls; diameter 10.0 mm = 4.0 mm balls strength 1.6mm: diameter 6.0, 7.0 and 8.0 mm = 3 mm balls diameter 7.0 to 10 mm = 4mm balls diameter 13 and 15mm = 5 mm balls strength 2.0mm: diameter 10.0 mm = 5.0, 6.0 mm balls; diameter 13.0, 15.0 mm = 6.0 mm balls strength 2.4mm: all diameters = 6mm balls strength 3.0 mm: all diameters = 6mm balls strength 4.0 mm: diameter 13.0 mm = 6mm balls; diameters 15.0, 19.0, 22.0 and 25.0 mm = 8.0 mm strength 5.0mm: all diameters = 8mm balls strength 6.0mm: all diameters = 10mm balls strength 8.0mm: all diameters = 12mm balls This product is also available in the Titan Blackline(r) (KCB), in the Steel Highline(r) (CBB) and in the Titan Zirconline(r) (GCB). All basics of the Steel Blackline(r) can be sterilised using the autoclave and are, due to the dermal gentleness of our materials, absolutely harmless to allergy sufferers. In case a piece of piercing jewellery that you favour is not available in a certain length, size or strength, we can furnish it for you with a PVD coating. These are available in the colours dark- and light blue, green, purple, black and gold.Any more questions? Don’t hesitate to contact us! The Wildcat(c) staff will help and advise you!